Hello fellow Retro Enthusiasts!!

Sometimes we enjoy playing a PoP with different sound right?
Well why not Tandy 3 voice this time? SN76489? NCR 8496? PSSJ?

In here you'll find 2 files:

PRINCET.EXE -> Tandy detection fooled, it will think you're running
on a Tandy and it will output to port C0h, just like a normal Tandy.
Use this option if you have a Tandy ISA card on an XT. It might work
an AT system, but the port must be set to C0h. You're gonna confuse
the hell out of your second DMA controller but hey...

Now for the bad news. This won't work on a TNDLPT or an ISA card set
to a different port + TSR redirection. I can't understand why yet, but
the notes won't pump out accordingly. It's something to do with redirection
so at the moment i can't do anything.


POP2C0.EXE -> Tandy detecton fooled but it pumps the data out to port 2C0h
so this is intended for a Tandy ISA card on an AT system with jumpers set to
2C0h. No need to load any TSR's, the port is actually set on the AX register,
so all you have to do is to run and you'll get perfect sound. Make sure you
don't have any redirection TSR's running or you'll hear no sound.



Enjoy and be nice to each other!

Yours truly,
CarlosTex