Macintosh System 6.0.8 - System Startup

This executable contains an original image of the Apple Macintosh System 6.0.8 System
Startup diskette. The diskette is high-density, therefore your Macintosh must also
have a high-capacity disk drive, commonly known at the time as the "SuperDrive".

"System Startup" is one of a two-diskette set. You will also need "System Additions" to
successfully install System 6.0.8.

Macintosh System 6.0.8 high-density diskette version will run on any Macintosh that
came out between the Macintosh SE HD version to the Macintosh Centris 650/610. The
original Macintosh II has low-density disk drives, so these images may not work.
However, some people upgraded their Macintosh II systems to include SuperDrives.

Macs, starting with the Macintosh Quadra 650/610, require Macintosh System 7.0 or later.

The self-extracting disk image will run under Windows 95 and later, including XP.


On the PC side:
---------------

1.	Place a write eanble 3.5-inch high-density diskette in the drive.
2.	Run 608sysst.exe, then click on the "Create Floppy" button.
3.	Wait for the copy process to finish.
4.	Upon completion, the floppy will be a Mac-formatted disk, and you won't
	be able to browse it from DOS or Windows. Eject it.

That's it! Have fun! :)