SOFTPAQ NUMBER:  SP6092
PART NUMBER:  
FILE NAME:  N/A
TITLE:  Support Software for Novell Products 
VERSION:  5.02 Rev B
LANGUAGE:  US English

CATEGORY:  Systems/Drivers

PRODUCTS AFFECTED:  All Compaq ProSignia and ProLiant Servers

OPERATING SYSTEM:  Novell NetWare 3.2
                   intraNetWare 4.11
                   intraNetWare SMP 4.11
                   NetWare SFT-III 4.1x
                   NetWare 5
                   

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  21 January 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP8009

DESCRIPTION:
Creates the Support Software for Novell Products (NSSD). NSSD
contains NetWare and intraNetWare drivers, NetWare Loadable Modules (NLMs), 
and support information to optimize the performance of NetWare and intraNetWare
on Compaq servers. This software enhances the performance of Compaq options
such as Compaq Drive Array controllers, Compaq 32-Bit SCSI-2 controllers, and
Compaq CD-ROM drives.

Enhancements/Fixes:  

INSTALLATION UPDATES

 CPQNSSC.NLM UPDATES

  *CPQNSSC.NLM v1.31 adds support for installing the PCI Hot Plug
   family of drivers.

 CPQNSSU.NLM UDPATES

  *CPQNSSU.NLM v1.40 was updated to allow NDS logins to remote servers
   for remote NSSD installations.


SERVER MANAGEMENT UPDATES

 CPQHLTH.NLM UPDATES

  *CPQHLTH.NLM v4.04 adds support for the ProLiant 400 server.

  *CPQHLTH.NLM v4.04 supports disabling of the Automatic Server
   Recovery (ASR) feature.  To disable ASR, type:

        load cpqhlth -DASR

   The command line is case sensitive.

   When the health driver loads, the default mode for ASR will be
   enabled with a 10 minute reset time.  The reset time cannot be
   changed.

  *CPQHLTH.NLM v4.04 has been updated to correctly handle Year 2000
   Integrated Management logging events.


 CPQIML.NLM UPDATES

  *CPQIML.NLM v1.01 was modified to show a 4-digit year.  Previously,
   the software only displayed a 2-digit year even though all decision
   making and functionality in CPQIML was Y2K compliant.


 CPQONLIN.NLM UPDATES

  *CPQONLIN.NLM v2.32 adds support for the Compaq Smart Array 221
   Controller.


 CPQSBD.NLM UPDATES

  *CPQSBD.NLM v2.14 has been enhanced to enable hot add to work in
   situations where low resources are available.


STORAGE UPDATES

 CPQARRAY.HAM UPDATES

  *CPQARRAY.HAM v1.23 was updated to prevent an ABEND from occurring
   when swapping a device from the same logical drive ID.


 CPQFC.HAM UPDATES

  * CPQFC.HAM v1.20 adds support for the RA8000 and ESA12000 Fibre
    Channel Storage Systems.


 CPQSCSI.HAM UPDATES

  * CPQSCSI.HAM v1.31 adds support for the ProLiant 400 server.

  * CPQSCSI.HAM v1.31 adds support for LVD drive controllers.


 CPQSHD.CDM UPDATES

  * CPQSHD.CDM v1.24 was modified to be used with CPQSCSI.HAM v1.30
    or later.


MISCELLANEOUS UPDATES

DOCUMENTATION UPDATES

In working towards the goal of providing a more streamlined
documentation product with the Novell SSD, the following individual
readme files will no longer be included as of this release:

  * Clients.rdm
  * Network.rdm
  * SMP.rdm
  * Srv_Mgmt.rdm
  * Storage.rdm

These files are in the process of being converted into TechNotes
and/or WhitePapers providing expanded coverage and more robust
information to the existing documents.  These papers will be published
on the Compaq website and notification of their publication will be
noted in this section of the Novell SSD.

In the meantime, should you require these files for reference, please
consult NSSD 5.01 or earlier located on the Compaq website,
http://www.compaq.com, or via ftp.compaq.com. using the appropriate
SoftPaq number.  The SoftPaq numbers for the last two releases of the
Novell SSD are:

  * NSSD 5.01, SoftPaq 8008 (disk), 8009 (cd)
  * NSSD 3.22, SoftPaq 5701

As always, your feedback and concerns are welcome at
NSSDFeedback@compaq.com.


HOW TO USE:

 1. Download the SoftPaq into a directory and change to that 
    directory.  The file that is downloaded is an executable with 
    a filename based on the SoftPaq Number above.

 2. From that drive and directory, execute the downloaded file 
    and follow the on-screen instructions. A new directory will be
    created named "NSSD_B.502", and the NSSD files will be expanded
    into a that directory and subdirectories will be created.

 4. After the NSSD has been created, you may delete the SoftPaq file
    downloaded in step 1.

 5. For installation instructions, refer to INSTALL.RDM in the directory
    that you expanded the SoftPaq.


Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.