SOFTPAQ NUMBER:  SP6059
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Insight Management Agents for SCO UnixWare 2
VERSION:  3.82  
LANGUAGE:  English 

CATEGORY:  Software Solutions 

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq Servers running SCO UnixWare 2.1
                    
OPERATING SYSTEM:  SCO UnixWare 2.1.2
		   SCO UnixWare 2.1.3
		   
SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  - Compaq Enhanced Feature Supplement (EFS) for
                  SCO UnixWare 2.1, Version 2.22 
                  
                - SCO UnixWare 2.1.2 also requires PTF3238b from SCO
                  (Available from SCO at ftp://ftp.sco.com/UW21). 

EFFECTIVE DATE:  October 12, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP7484

DESCRIPTION:  Creates a diskette containing Compaq Insight Management 
agents for SCO UnixWare 2, Version 3.82.  

IMPORTANT:  Before installing, remove earlier version Compaq Insight 
Management Agents for SCO UnixWare 2, as explained below.

HOW TO USE:

Steps 1-5 are performed under DOS, Microsoft Windows 3.1, Windows95 
or Windows NT.
Steps 6-10 are performed under SCO UnixWare 2.1.2 or 2.1.3.

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
   to that directory.  The file that is downloaded is an executable with 
   a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions. Three files will be created:
   SP6059.TXT, CIM382._01 and QRST5.EXE.

4. Execute QRST5.EXE and you will be prompted to insert the formatted
   diskette in a drive to create the diskette containing Compaq Insight
   Management Agents for UnixWare 2.

5. After the diskette has been created, you may delete the  
   SoftPaq file downloaded in step 2 and the files upacked in step 3.

6. To install the Compaq Insight Management Agents for SCO UnixWare 2,
   log in as "root."

7. If the server already has CIM Agents installed, remove them using
   the following command:

      # pkgrm cim

8. Insert the newly created diskette into the SCO default diskette
   drive and execute the following command:

      # pkgadd -d diskette1 cim

   Follow the on-screen instructions.

9.  Remove the diskette.

10. Restart the server to complete the installation.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies