SOFTPAQ NUMBER: SP9896 PART NUMBER: 276672-402 FILE NAME: N/A TITLE: Compaq Server Support for Microsoft Windows NT 3.51 VERSION: 1.35 Rev A LANGUAGE: English CATEGORY: Drivers DIVISIONS: Systems PRODUCTS AFFECTED: ProLiant 800, ProLiant 850R, ProLiant 1000, ProLiant 1200, ProLiant 1200R, ProLiant 1500, ProLiant 1500R, ProLiant 1600, ProLiant 1850R, ProLiant 2000, ProLiant 2500, ProLiant 2500R,ProLiant 3000, ProLiant 3000R, ProLiant 4000, ProLiant 4500, ProLiant 4500R, ProLiant 5000, ProLiant 5000R, ProLiant 5500, ProLiant 6000, ProLiant 6400R, ProLiant 6500, ProLiant 7000, ProSignia 300, ProSignia 500, Prosignia 740, Systempro, Systempro/e, Systempro/LT, Systempro/XL OPERATING SYSTEM: Microsoft Windows NT Version 3.51 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: July 22, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.0 SUPERSEDES: SP8705 DESCRIPTION: This SoftPaq creates the Compaq Server Support (SSD) for the Microsoft Windows NT 3.51 diskettes. There are a total of three diskettes with this release. The SSD supports the following subsystems and features of Compaq Servers: ATI Rage IIC Graphics Controller Compaq Advanced Network Control Utility Compaq Ethernet, Fast Ethernet, or Gigabit Controllers Compaq NC1120 Ethernet NIC Compaq NC3120 Fast Ethernet NIC Compaq NC3121 Fast Ethernet NIC Compaq NC3122 Fast Ethernet NIC Compaq NC3123 Fast Ethernet NIC Compaq NC3131 Fast Ethernet NIC Compaq NC3132 Fast Ethernet Module Compaq NC3133 Fast Ethernet Module Compaq NC3160 Fast Ethernet NIC Compaq NC3161 Fast Ethernet NIC Compaq NC6132 Gigabit Module Compaq NC6133 Gigabit Module Compaq NC6134 Gigabit NIC Compaq HAL Support (Uniprocessor and Multiprocessor) Compaq Integrated Management Display Utility Compaq Netelligent Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller Compaq NetFlex-3 Controllers Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller Compaq Network Teaming and Configuration Utility Compaq ProLiant Storage System Compaq Recovery Server, Standby Agent with SMART-2 Support Compaq Recovery Server, Online Agent with SMART-2 Support Compaq Remote Insight Board/PCI Driver Compaq Remote Insight Board/PCI WAN Driver Compaq SCSI Controllers Compaq Dual Channel Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller Compaq 32-Bit Fast-Wide SCSI-2/E Controller Compaq 32-Bit Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Compaq 32-Bit Fast-SCSI-2 Controller option board Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board Compaq Wide-Ultra SCSI-3 Controller option board Compaq SMART/SMART-2 Array Controllers Compaq SMART/IDA-2/IDA/IAES Controllers Compaq SMART-2/P and Compaq SMART-2/E Controllers Compaq SMART-2DH Controller Compaq SMART-2SL Controller Compaq Smart Array Controllers Compaq Smart Array 3100ES Controller Compaq Smart Array 3200 Controller Compaq Server Support Installation Utility Compaq System Management/Health Driver The following diskettes can be created using the files that result when the SoftPaq is unbundled: Disk 1 - Compaq Server Support for Microsoft NT 3.51 Disk #1 Disk 2 - Compaq Server Support for Microsoft NT 3.51 Disk #2 Disk 3 - Compaq Server Support for Microsoft NT 3.51 Disk #3 Enhancements/Fixes: The release of the Compaq Server Support for Microsoft Windows NT 3.51 Version 1.35 Revision A primarily supports the following new products: · Compaq NC3123 Fast Ethernet NIC · Compaq NC6134 Gigabit NIC · ProLiant 6400R 6/550-2 MB Model 2-1024 · ProLiant 6400R 6/550-1 MB Model 2-256 · ProLiant 6400R 6/550-512 KB Model 1-256 · Prosignia Server 740 6/600 · Compaq 64-Bit Dual Channel Wide-Ultra2 SCSI Controller Compaq Ethernet, Fast Ethernet, or Gigabit Controller Driver(N100.SYS, N1000NT3.SYS) · Updated the Compaq Ethernet or Fast Ethernet Controller Driver, N100.SYS, from Version 3.29.01.0008 to Version 3.29.01.0011, which provides new support for the Compaq NC3123 Fast Ethernet NIC. · Added new support to Version 1.05.00.1012 of the Compaq Gigabit Controller Driver, N1000NT3.SYS, for the Compaq NC6134 Gigabit NIC. Compaq SCSI Controller Driver(CPQ32FS2.SYS) · Updated the Compaq SCSI Controller Driver from Version 2.57 to Version 2.58. · Added new support for the Compaq 64-Bit Dual Channel Wide-Ultra2 SCSI Controller. · Modified the Compaq SCSI Controller Driver to detect invalid firmware for Quantum DLT 7000 tape drives, which are incapable of running at high speed with firmware versions earlier than 0x2050. When the incorrect firmware is detected, the driver forces the tape drive to run at the slowest speed, which is asynchronous 8-bit. Compaq Server Support Setup for Microsoft Windows NT 3.51(SETUP.EXE) · Added new support for the Compaq Ethernet, Fast Ethernet, or Gigabit Controller Drivers so that they may be updated locally. Refer to Table 4 of the SMS Unattended Installation/Update of the Compaq SSD for Windows NT section for the associated constraints. · Fixed a Compaq Ethernet, Fast Ethernet, or Gigabit Controller removal issue involving systems configured with multiple Compaq Ethernet, Fast Ethernet, or Gigabit Controllers. In this case, using Version 1.34C of the Compaq SSD for Windows NT 3.51 Setup program to remove a Compaq Ethernet, Fast Ethernet, or Gigabit Controller results in the removal of the Network icon from the Control Panel even if other hardware instances were installed. Compaq System Management Driver(SYSMGMT.SYS) · Updated the Compaq System Management Driver version from 3.18.02 to 3.19.01. · Corrected a problem in the driver that would potentially cause a Windows NT BugCheck if the system encountered a large number of correctable processor errors. This issue affected all Pentium Pro, Pentium II, Pentium III, Pentium II Xeon, and Pentium III Xeon systems configured with Version 3.06.01 or later of the Compaq System Management Driver. For details, refer to NTREADME.HLP in the created support files. HOW TO USE: 1. Obtain three formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP9896.EXE. 3. From that drive and directory, execute the downloaded SoftPaq file: SP9896 [ENTER] and follow the on-screen instructions. The following files will be created: QRST5.EXE 276672US._01 276672US._02 276672US._03 276672US.DOC 4. Please read 276672US.DOC for instructions on using QRST5 to create the diskettes and for the steps to install the software. 5. After the disks are created, you may delete the downloaded file SP9896.EXE and the other files it created from your hard drive if you wish. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies