===============================================================================
Bouncy Bee Learns Words Version 1.03


  PROGRAM ENHANCEMENTS
  ____________________

  The Bouncy Bee Learns Words Version 1.03 installation includes
  support for the following speech adapters:

  o   Digispeech (TM) DS201A Audio Adapter
      (TM) Digispeech is a trademark of Digispeech, Inc.

  o   IBM M-Audio Capture/Playback Adapter

  o   IBM PS/2 (R) Speech Adapter
      (R) PS/2 is a registered trademark of International Business
      Machines Corporation.

  This documentation contains modified or additional instructions for
  topics described in the Bouncy Bee Learns Words manual.

  IMPORTANT:  Do NOT use the instructions for these tasks
              included in the Bouncy Bee Learns Words manual.
              Instead, use the instructions in this documentation.

  o   Setup guidelines
  o   Special program features
  o   Messages

  In addition, the section "IBM Classroom LAN Administration System
  Compatibility" on page 15 provides instructions for installing
  and using Bouncy Bee Learns Words Version 1.03 on a network.


  SETUP GUIDELINES
  ________________

  The Bouncy Bee Learns Words Version 1.03 update is a self-installing 
  program.  No setup procedure is needed.


  SPECIAL PROGRAM FEATURES
  ________________________

  Bouncy Bee Learns Words Version 1.03 includes an additional
  teacher option to help manage student activity:

  o   Delete all names in a group

  Bouncy Bee Learns Words Version 1.03 includes special
  considerations or modifications for two other teacher options:

  o   Printing worksheets
  o   Reports


  DELETING ALL NAMES IN A GROUP

  The Delete a Group or a Name option on the Options Menu now has
  a function to delete all names in a group.  To delete all names
  in a group, follow these steps:

  1.  Select "Delete a Group or a Name" from the Options Menu.

      The Delete a Group or a Name Menu appears.

  2.  Select "Delete All Names in a Group".

      The Current Groups Menu appears with a list of the current groups.

  3.  Select the group from which you want to delete all names.

      The Delete All Names Menu appears with the group name and
      the following message:

        Delete all names in group

  4.  Select one of the following:

      o   Press the SPACEBAR to delete all the names in the group.

          The names are deleted, and the Delete a Group or a Name
          Menu appears.

      o   Press ESC to exit without deleting all the names in the
          group and return to the Delete a Group or a Name Menu.

  5.  Select "Exit" to return to the Options Menu.


  PRINTING WORKSHEETS WITH DOS VERSION 4.0 OR HIGHER

  IMPORTANT:  This section only applies if you are using DOS
              Version 4.0 or higher and you started Bouncy Bee
              Learns Words from a drive other than the drive
              where you started DOS.
  
  To ensure correct print format for worksheets printed from
  Bouncy Bee Learns Words using DOS 4.0 or higher, follow the
  procedure for starting Bouncy Bee Learns Words using DOS 4.0 or
  higher on page 3.


  REPORTS

  Reports have been reformatted for better readability.

  Report symbols are different from those in the sample report in
  the Bouncy Bee Learns Words manual.  For example:

  @    Indicates "Word List introduced"
  #    Indicates "Word List practiced"
  *    Indicates "Word List mastered"

  When printing has completed or you press the SPACEBAR at the
  last display screen, the Reports Menu appears.


  MESSAGES
  ________

  THE FOLLOWING MESSAGES FROM PREVIOUS VERSIONS OF BOUNCY BEE
  LEARNS WORDS HAVE BEEN EXPANDED.


  DISKETTE ERROR HAS OCCURRED.
  TYPE R TO RETRY OR C TO CANCEL.

  EXPLANATION:  This message existed in previous versions and can
                apply to the following problems:

  o   If you are using the program with IBM Classroom LAN
      Administration System, this message appears if the program
      is operating in automatic mode (Let's Learn Our Words) and
      the workstation is trying to access a data file at the same
      time another workstation is accessing the file.

      Follow these steps to correct this problem:

      1.  Type R to retry.

      2.  If the problem continues after a few attempts to retry,
          type C to cancel the operation.

          The program stops, and the Class Menu appears.

      3.  Log out, restart the workstation, and restart Bouncy
          Bee Learns Words from the Class Menu.

          If the message continues, type C to stop the program,
          then contact your next level of support.

  DISKETTE DRIVE IS OPEN, OR THE DISKETTE IS NOT IN THE CORRECT DRIVE.
  TYPE R TO RETRY OR C TO CANCEL.

  EXPLANATION:  This message existed in previous versions and can
                apply to the following problems:

  o   If you are using the program with IBM Classroom LAN
      Administration System and printing reports, the printer
      queue is not accepting jobs.  Check with the network
      administrator for the status of the print queue.

      Follow these steps to correct the problem:

      1.  Type R to retry.

      2.  If the problem continues after a few attempts to retry,
          type C to cancel the print operation.

          The program stops, and the Class Menu appears.

      3.  Log out, restart the workstation, and restart Bouncy
          Bee Learns Words from the Class Menu.

          If the message continues, type C to stop the program,
          then contact your next level of support.

  THE NO NAMES OR GROUPS ARE RECORDED MESSAGE FROM PREVIOUS
  VERSIONS OF BOUNCY BEE LEARNS WORDS HAS BEEN DIVIDED INTO THE
  FOLLOWING TWO MESSAGES FOR BOUNCY BEE LEARNS WORDS VERSION
  1.03.


  NO GROUPS ARE RECORDED.

  EXPLANATION:  You tried to complete a program option that
                required a group, but no groups are available.

  Select "Add a Group or a Name" from the Options Menu, then add
  a group.


  NO NAMES ARE RECORDED FOR GROUP.

  EXPLANATION:  You tried to complete a program option that
                required a name, but no names exist for the
                selected group.
  Select "Add a Group or a Name" from the Options Menu, then add
  names to the group.


  NEW MESSAGES FOR BOUNCY BEE LEARNS WORDS VERSION 1.03.


  AUDIO DRIVER IS NOT INSTALLED
  HIT ANY KEY TO CONTINUE:

  EXPLANATION:  No speech device was detected.  Bouncy Bee Learns
                Words supports the following speech devices:

  o   Digispeech DS201A Audio Adapter
  o   IBM M-Audio Capture/Playback Adapter
  o   IBM PS/2 Speech Adapter

  A speech device is not required to use Bouncy Bee Learns Words.

  The program will start and run without speech.  If you want
  speech and a supported speech device is installed, exit the
  program and check the cable and power supply.  If the message
  continues, contact your next level of support.

  DATA FILE(S) NECESSARY TO RUN BOUNCY BEE LEARNS WORDS ARE NOT
  PRESENT IN THE LOG DIRECTORY FOR THIS CLASS.  SEE "MESSAGES" IN
  THE BOUNCY BEE LEARNS WORDS VERSION 1.03 LEAFLET.

  EXPLANATION:  This message applies only if you are using Bouncy
                Bee Learns Words with IBM Classroom LAN
                Administration System.  Data file(s) necessary
                for the Bouncy Bee Learns Words management system
                are not present in the log directory for the
                class.  These files store the progress data for
                running the program in automatic mode (Let's
                Learn Our Words).

  Follow these steps to correct the problem:

  1.  Use the "Add/Remove Programs in this Class" option on the
      teacher's IBM Classroom LAN Administration System Class
      Management Menu to remove Bouncy Bee Learns Words V 1.03
      from the class, then to add the program to the class again.

      This causes the data files to be copied to the log directory.

  2.  Restart the program.

  If student data existed and you want to try to recover it, see
  "Adding Bouncy Bee Learns Words to a Class" on page 17.

  GRAPHICS.COM NOT FOUND BY SYSTEM.
  PLEASE INCLUDE DIRECTORY WITH GRAPHICS.COM AND GRAPHICS.PRO
  IN THE DOS ENVIRONMENT VARIABLE "PATH" AND RETRY.

  PRESS ANY KEY TO CONTINUE...

  EXPLANATION:  This message applies only if you are using DOS
                Version 4.0 or higher.  The attempt to load the
                printer profile necessary for printing worksheets
                during Bouncy Bee Learns Words start-up failed
                because the system cannot find the DOS utility
                program GRAPHICS.COM.

  Update the PATH statement in the AUTOEXEC.BAT file to include
  the directory that contains GRAPHICS.COM and GRAPHICS.PRO, then
  retry the procedure.  To update the PATH statement, complete
  the following steps:

  1.  Edit the file AUTOEXEC.BAT with an ASCII editor.

  2.  Look for the following statement:

        PATH=...

  3.  If the statement exists, add the following to the end of
      the statement:

        ;X:\YYYYYYYY;

      (Where X is the drive letter and YYYYYYYY is the directory
      that contains GRAPHICS.COM and GRAPHICS.PRO.)

      If the statement does not exist, add the following
      statement as a separate line:

        PATH=X:\YYYYYYYY;

      (Where X is the drive letter and YYYYYYYY is the directory
      that contains GRAPHICS.COM and GRAPHICS.PRO.)

      NOTE:  The DOS directory normally contains these files.

  4.  Save the file AUTOEXEC.BAT.

  5.  Restart the computer and program.

  Refer to the DOS manual for further information on the PATH
  statement and AUTOEXEC.BAT.

  NO NAMES ARE REGISTERED FOR CLASS.
  EXIT.

  EXPLANATION:  This message is for IBM Classroom LAN
                Administration System only.  You tried to
                complete a program option that required a name,
                but no names are registered in the class.


  1.  Press the SPACEBAR to return to the menu.

  2.  Register students in the management system.  See "Register
      Names in Class" on page 22.
  xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  SYSTEM COULD NOT LOAD GRAPHICS.COM WITH BOUNCY.PRO PROFILE.
  PLEASE CORRECT THE PROBLEM STATED AND RETRY.

  PRESS ANY KEY TO CONTINUE...


  EXPLANATION:  Where xxxxxxxxxxxxxxxxxxxxxxxxxxxxx is one of the following
  messages:

  1.  "Cannot find GRAPHICS profile."

  2.  "Error reading GRAPHICS profile."

  3.  "Unable to reload with profile supplied."

  These messages apply only if you are using DOS Version 4.0 or
  higher.  A printer profile for printing worksheets is loaded
  during Bouncy Bee Learns Words start-up.  The attempt to set
  this profile was not successful.

  o   To correct the problems that cause messages 1 and 2,
      complete the following steps:

      -   If you are running under IBM Classroom LAN
          Administration System, notify the network administrator
          that file(s) may be missing or corrupt in the server
          directory containing Bouncy Bee Learns Words.

          The network administrator should update the files with
          the master program diskette using the "Install Program
          Updates" option on the Administrator Main Menu.

  o   To correct the problem that causes message 3, complete the
      following steps:

      1.  Logout (if you are using IBM Classroom LAN
          Administration System).

      2.  Restart the computer.

          NOTE:  Ensure that GRAPHICS.COM loads before starting
                 the program.  Type GRAPHICS and press ENTER,
                 or include a GRAPHICS statement in the
                 AUTOEXEC.BAT file.

      3.  Restart the program.


  xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  SYSTEM COULD NOT RESET GRAPHICS.COM WITH GRAPHICS.PRO PROFILE.
  BOUNCY.PRO PROFILE IS CURRENTLY LOADED.
  PRESS ANY KEY TO CONTINUE...

  WHERE xxxxxxxxxxxxxxxxxxxxxxxxxxxxx CAN BE ONE OF THE FOLLOWING MESSAGES:

  1.  Cannot find GRAPHICS profile

  2.  Error reading GRAPHICS profile

  3.  Unable to reload with profile supplied

  EXPLANATION:  These messages apply only if you are using DOS
                Version 4.0 or higher.  A printer profile for
                printing worksheets is loaded during Bouncy Bee
                Learns Words start-up.  The attempt to reset the
                profile to the default profile when exiting
                Bouncy Bee Learns Words was not successful.

  Log out (if you are using IBM Classroom LAN Administration
  System), then restart the computer to reset it for the next
  program.

  NOTE:  If DOS 5.0 is installed, you can avoid this problem by
         loading GRAPHICS.COM before starting Bouncy Bee Learns
         Words.  Type GRAPHICS and press ENTER, or include a
         GRAPHICS statement in the AUTOEXEC.BAT file.

  SYSTEM COULD NOT UNLOAD SPEECH DEVICE DRIVER.

  EXPLANATION:  The system cannot remove the speech device driver
                for the installed audio device from memory.

  Log out (if you are using IBM Classroom LAN Administration
  System), then restart the computer to reset it for the next
  program.

  TEACHER HAS NOT REGISTERED CLASS.
  EXIT.

  EXPLANATION:  This message is for IBM Classroom LAN
                Administration System only.  The teacher has not
                registered the class in the Bouncy Bee Learns
                Words management system.

  1.  Press the SPACEBAR to return to the Main Menu.

  2.  Register the class, the students in the class, and the
      teacher in the management system.

      See "Register Names in Class" on page 22.

  TERMINATE BATCH JOB (Y/N)?.

  EXPLANATION:  CTRL+BREAK was pressed while running the program.

  Press N to continue.

  NOTE:  If you press Y, the system returns to the DOS prompt.
         Restart the computer to ensure that it is properly set
         up for the next program.

  xxxxxxxxxxxxxxxxxxxxxxxxxxxxx  NOT REGISTERED.

  WHERE xxxxxxxxxxxxxxxxxxxxxxxxxxxxx IS A STUDENT NAME FROM IBM
  Classroom LAN Administration System

  EXPLANATION:  This message is for IBM Classroom LAN
                Administration System only.  The teacher has not
                registered the student in the class.

  1.  Press the SPACEBAR to return to the Main Menu.

  2.  Register the student in the management system.

      See "Register Names in Class" on page 22.


  IBM CLASSROOM LAN ADMINISTRATION SYSTEM COMPATIBILITY
  _____________________________________________________

  Bouncy Bee Learns Words Version 1.03 is compatible with IBM
  Classroom LAN Administration System.  The Bouncy Bee Learns
  Words management system provides support for multiple students'
  progress to be updated simultaneously.  The management system
  consists of one class of up to 50 students, plus one teacher.
  The teacher is provided with enhanced registration, management,
  and reporting functions.  Students are registered from a class
  list of student IDs and names provided by IBM Classroom LAN
  Administration System.

  NOTE:  All learning activities as in previous versions of
         Bouncy Bee Learns Words remain and operate the same way.


  INSTALLING BOUNCY BEE LEARNS WORDS ON IBM CLASSROOM LAN
  ADMINISTRATION SYSTEM

  NOTE:  This procedure is for a system administrator (user ID ADMIN).

  Follow these steps to install Bouncy Bee Learns Words on the
  network:

  1.  From a workstation, log in as SYSOP or ADMIN ID.

  2.  Change current drive to CD-ROM drive.

  3.  Type "INSTALL" and hit Enter.  Hit Space Bar to view
      the instructions.

  4.  Select "Selectively install updates" from the Patch Update Main Menu.

  5.  Select "Bouncy Bee Learns Words V1.03"

      The installation procedure may ask you what volume to install the update.
      Select the volume of your choice.

      After a short amount of time, the following message appears:

        Cleaning up...

      When cleanup is complete, the program is installed, and the
      Administrator Main Menu appears.


  ADDING BOUNCY BEE LEARNS WORDS TO A CLASS

  Refer to the IBM Classroom LAN Administration System User's
  Guide to add Bouncy Bee Learns Words to a class.  When adding
  Bouncy Bee Learns Words to a class, necessary data files are
  copied to the log directory for the class.

  NOTE:  If you remove Bouncy Bee Learns Words Version 1.03 from
         a class, these data files remain in the log directory
         for that class.  If you add the program to this class
         again, you can use these data files to restore previous
         student data.

  Before new data files are copied into the log directory, the
  previously existing data files are renamed with the file
  extension .SAV.  You can use these files to replace the newly
  copied files in the log directory.

  IMPORTANT:  Do not copy any data files from previous versions
              of Bouncy Bee Learns Words; they are not
              compatible.

  To restore previous student data, follow these steps:

  1.  Select a class from the Class Menu where Bouncy Bee Learns
      Words Version 1.03 was added after being removed.

      The Class Menu appears.

  2.  Use the menu escape sequence to exit to DOS.

  3.  Type L: and press ENTER.

      This places you in the log directory.

  4.  Type DIR and press ENTER.

      The following files should appear on the list:

          GROUPW.FIL
          STUDENTW.FIL
          WL.FIL
          GROUPW.SAV
          STUDENTW.SAV
          WL.SAV

  5.  To restore the class data from a previous addition of
      Bouncy Bee Learns Words Version 1.03 to this class, type
      the following commands, pressing the ENTER key after each
      line:

        COPY GROUPW.SAV GROUPW.FIL
        COPY STUDENTW.SAV STUDENTW.FIL
        COPY WL.SAV WL.FIL

      After each copy command, the following message is displayed:

        1 file(s) copied.

      If this message is not displayed for a copy, retype the
      copy command and press ENTER.

  6.  After copying the files, delete the old data files by
      typing the following commands, pressing the ENTER key after
      each line:

        DEL GROUPW.SAV
        DEL STUDENTW.SAV
        DEL WL.SAV

  7.  Type G and press ENTER to return to the IBM Classroom LAN
      Administration System Main Menu.


  STARTING BOUNCY BEE LEARNS WORDS FROM A CLASS MENU

  After Bouncy Bee Learns Words is installed, added to classes,
  and teachers register students, you can start the program from
  the Class Menu.  (See "Register Names in Class" on page 22.)

  IMPORTANT:

  1.  The DOS utility program GRAPHICS.COM must be loaded prior
      to starting Bouncy Bee Learns Words.  This is normally
      accomplished during workstation start-up procedure.  The
      AUTOEXEC.BAT file on the workstation boot diskette or on
      the remote boot image file should contain a GRAPHICS
      statement.

  2.  The Bouncy Bee Learns Words Version 1.03 management system
      updates multiple students' progress while running in
      automatic mode (Let's Learn Our Words).  On occasion, a
      workstation may try to access a data file at the same time
      another workstation is accessing the file.  If this
      happens, the following message appears:

        Diskette error has occurred.
        Press R to retry or C to cancel.

      Type R to continue.  (If the message continues to appear,
      see "Messages" on page 5 for further information.)


  Follow these steps to start Bouncy Bee Learns Words from a
  Class Menu:

  1.  From the IBM Classroom LAN Administration System Main Menu,
      select the class that contains Bouncy Bee Learns Words.

      The Class Menu appears.

  2.  Select "Bouncy Bee Learns Words V 1.03" from the Class Menu.

      The title screen appears.

  3.  Press the SPACEBAR to continue to the introduction screen.

      After a few moments, the Main Menu appears.


  STUDENT OPTIONS

  Students have the following options on the Bouncy Bee Learns
  Words Main Menu:


  +--------------------------------+
  |                                |
  |          Main Menu             |
  |                                |
  |    Let's Learn Our Words       |
  |    Direct Select               |
  |    Help                        |
  |    Exit                        |
  |                                |
  +--------------------------------+

  Figure 1. Student Main Menu

  LET'S LEARN OUR WORDS
     Select "Let's Learn Our Words" to operate in automatic mode
     and activate the management system.  A greeting with the
     student's name appears.

     Press the SPACEBAR to continue with the student's next
     activity, as determined by the management system.  See
     "Operating Bouncy Bee Learns Words" in the Bouncy Bee Learns
     Words manual for details on learning activities and
     progression through the word lists.

  DIRECT SELECT
     This option has not changed.

  HELP
     This option has not changed.

  EXIT
     This option has not changed.


  TEACHER OPTIONS

  Teachers have the following options on the Bouncy Bee Learns
  Words Main Menu:


  +--------------------------------+
  |                                |
  |          Main Menu             |
  |                                |
  |    Let's Learn Our Words       |
  |    Direct Select               |
  |    Options                     |
  |    Help                        |
  |    Exit                        |
  |                                |
  +--------------------------------+

  Figure 2. Teacher Main Menu

  LET'S LEARN OUR WORDS
     This option functions as it does for students.

  DIRECT SELECT
     This option functions as it does for students.

  OPTIONS
     Select "Options" to access registration, management, and
     reporting functions.  Teachers have the following options on
     the Options Menu:


  +--------------------------------+
  |                                |
  |         Options Menu           |
  |                                |
  |    Register or Update Class    |
  |    Create a New Word List      |
  |    Print Worksheets            |
  |    Reports                     |
  |    System Options              |
  |    Help                        |
  |    Exit                        |
  |                                |
  +--------------------------------+

  Figure 3. Teacher Options Menu

     REGISTER OR UPDATE CLASS
        Select "Register or Update Class" to register or delete
        students to the class.  Teachers have the following
        options on the Register or Update Class Menu:


  +--------------------------------+
  |                                |
  | Register or Update Class Menu  |
  |                                |
  |   Register Names in Class      |
  |   Delete Name                  |
  |   Delete All Names in Class    |
  |   Exit                         |
  |                                |
  +--------------------------------+

  Figure 4. Register or Update Class Menu

        REGISTER NAMES IN CLASS
           To register the class, the students in the class, and
           the teacher in the Bouncy Bee Learns Words management
           system, follow these steps:

           1.  Select "Register Names in Class"

               IMPORTANT:  Before students can run the program in
                           automatic mode (Let's Learn Our
                           Words), students must be registered
                           using this option.

               The Register Names in Class Menu displays the
               teacher ID and class description.  (The class
               description displayed throughout the program is
               from the IBM Classroom LAN Administration System
               class description.)

               With this option, student registration into the
               Bouncy Bee Learns Words management system is
               automated using the list of student IDs and names
               provided by IBM Classroom LAN Administration
               System.  Each time a teacher starts Bouncy Bee
               Learns Words from a Class Menu, IBM Classroom LAN
               Administration System generates a new class list
               (student IDs and names).  This list is processed,
               and students are added to the management system by
               their student ID.  The teacher is registered from
               the user ID and the default name "Teacher".  If
               additional students are added to the class, select
               this option to automatically add the new names to
               the Bouncy Bee Learns Words management system.

               NOTE:  This option does not delete names from the
                      Bouncy Bee Learns Words management system,
                      even if the names are removed from the IBM
                      Classroom LAN Administration System class
                      list.  This allows teachers to review the
                      history of student activity even for
                      students removed from the class.  Teachers
                      must manually delete names from the Bouncy
                      Bee Learns Words management system.  (See
                      "Delete Name" on page 23.)

           2.  Press the SPACEBAR to continue to register or
               update this class with students from the class
               list provided by IBM Classroom LAN Administration
               System.

               Bouncy Bee Learns Words scans the class list for
               any students not previously registered.  The
               Register Next Name screen displays the user ID,
               name, and one of the following messages:

               o   "Registering student."  for students not yet
                   registered

               o   "Student already registered."  for students
                   previously registered

               When the teacher and all students from the class
               list are registered, the Register or Update Class
               Menu appears.

        DELETE NAME
           Select "Delete Name" to delete a student from the
           Bouncy Bee Learns Words management system.  This
           deletion affects only the Bouncy Bee Learns Words
           management system and does not affect the IBM
           Classroom LAN Administration System list of students
           in the class.

           1.  Use the UP and DOWN arrow keys to select an ID.
               If there are more than 15 IDs, use the "Next" and
               "Previous" options to see different screens of
               student IDs.

               The message "Delete Name?"  appears, followed by
               the student ID.

           2.  Select "Yes" or "No" accordingly.

           3.  Continue to select names to delete.

           4.  When finished, press ESC to return to the Register
               or Update a Class Menu.

               NOTE:  If there are more than 15 IDs, you can
                      select the "Exit" option.

           SUGGESTION:  If a student completes all the word lists
                        and you want to provide more practice in
                        automatic mode, delete the student, then
                        register (Register or Update Class) the
                        student again.  You may want to print a
                        report of the student's previous activity
                        before deleting the student.

        DELETE ALL NAMES IN CLASS
           Select "Delete All Names in Class" to delete all
           students in the class from the management system.
           This deletion is from the Bouncy Bee Learns Words
           management system and does not affect the IBM Classroom
           LAN Administration System list of students in the class.

           The Delete All Names Menu displays the class
           description and the following message:

             Delete all names in class.

           Press the SPACEBAR to continue with deletion of all
           names in the class, or press ESC to return to the
           Register or Update Class Menu without deleting any
           names.

        EXIT (FROM THE REGISTER OR UPDATE CLASS MENU)
           This option has not changed.

     CREATE A NEW WORD LIST
        This option has not changed.

     PRINT WORKSHEETS
        This option has not changed.

        IMPORTANT:  The DOS utility program GRAPHICS.COM must be
                    loaded before starting Bouncy Bee Learns
                    Words.  This is usually done as part of the
                    workstation start-up procedure.  The
                    AUTOEXEC.BAT file on the workstation boot
                    diskette or on the remote boot image file
                    should contain a GRAPHICS statement.

     REPORTS
        Select "Reports" to generate an activity report for a
        student or the entire class.  The Reports Menu appears.
        Teachers have the following options for printing reports:


  +--------------------------------+
  |                                |
  |         Reports Menu           |
  |                                |
  |           Printer              |
  |           Screen               |
  |           Exit                 |
  |                                |
  +--------------------------------+

  Figure 5. Reports Menu

        PRINTER
           Select "Printer" to print a report to the printer.

           NOTE:  Ensure that the printer is on and on-line, and
                  that paper is inserted properly.

        SCREEN
           Select "Screen" to display the report on the screen.

  +-------------------------------------------------------------------+
  | Selecting "Printer" or "Screen" causes the Reports Category Menu  |
  | to appear with the following options:                             |
  +-------------------------------------------------------------------+


  +--------------------------------+
  |                                |
  |    Reports Category Menu       |
  |                                |
  |      One Name                  |
  |      Classroom Description     |
  |      Exit                      |
  |                                |
  +--------------------------------+

  Figure 6. Reports Category Menu

           (Where classroom description is the IBM Classroom LAN
           Administration System class description.)

           ONE NAME
              Select "One Name" to generate a report for one
              student in the class.

              Use the UP and DOWN arrow keys to select an ID from
              the Report a Name Menu.  If there are more than 15
              IDs, use the "Next" and "Previous" options to see
              different screens of student IDs.

              o   If you print the report to the printer, the
                  following message appears:

                    Print report?

                  Select "Yes" or "No" accordingly.  If you
                  select "Yes", the following message is
                  displayed until the report is printed:

                    Please wait...

              o   If you display the report on the screen, the
                  report of the ID is displayed with the
                  following message at the bottom of the report:

                    End of Report-Spacebar for menu.

              If the report has printed or you press the SPACEBAR
              at the display screen, the Report a Name Menu
              appears.  Continue to select IDs to generate
              reports.  When you finish, press ESC to return to
              the Reports Menu.

              NOTE:  If there are more than 15 IDs, you can
                     select the "Exit" option to return to the
                     Reports Menu.

           CLASSROOM DESCRIPTION
           _____________________

              Select classroom description to generate a report
              for all students in the class.

              o   If you print the report to the printer, the
                  following message appears:

                    Print report?

                  Select "Yes" or "No" accordingly.  If you
                  select "Yes", the following message is
                  displayed until the report is printed:

                    Please wait...

              o   If you display the report on the screen, the
                  report of the ID(s) is displayed, along with
                  one of the following messages at the bottom of
                  each page:

                    Press Spacebar to continue.

                  or

                    End of Report-Spacebar for menu.

              When the report has printed or you press the
              SPACEBAR at the last display screen, the Reports
              Menu appears.
           EXIT (FROM THE REPORTS CATEGORY MENU)
              This option has not changed.

        EXIT (FROM THE REPORTS MENU)
           This option has not changed.

     SYSTEM OPTIONS (FROM THE OPTIONS MENU)
        This option has not changed.

     HELP (FROM THE OPTIONS MENU)
        This option has not changed.

     EXIT (FROM THE OPTIONS MENU)
        This option has not changed.

  HELP (FROM THE MAIN MENU)
     This option functions as it does for students.

  EXIT (FROM THE MAIN MENU)
     This option functions as it does for students.

