Radius SVGA MultiView MC
@80B7.ADF
- Radius SVGA MultiView
Radius SVGA Utilities disk
courtesy of Mike Armstrong
Radius SVGA Drivers
Disk (Win3.1/ACAD/Lotus)
SVGA MultiView MC
ADF Sections
SVGA MultiView
MC
J2 HDD15 port
J4 VESA Media Connector
JP1 Three pin header (ROM Bank
?)
SW1 Monitor switch
U5 SC11484CV RAMDAC |
U6 Headland HT209/D
U18,19 BIOS
U20 Radius 297-0580-A
U27 14.318 xtal
U51-58 Toshiba TC524256BJ-80 |
JP1- Possibly chooses between two
BIOS ROM banks???
SW1 It says-
2 ON - FULL PAGE DISPLAY
2 OFF - MULTISYNC MONITOR
I _assume_ this might mean BOTH
on or off.
U18,19 BOTH are marked SVGA
Multiview MC, V2.02 256K, -0050-02 A
U5 Sierra Semiconductor Mark2 SC11484
(15bit, 6/8bit DAC, overlay)
ADF Sections
080B7h "Radius SVGA MultiView"
FastWrite Setting
The FastWrite cache is used to reduce memory wait states
to virtually zero on all memory writes.
<"FastWrite
Enabled">, FastWrite Disabled
Pure Mode Setting
Pure Mode is used to emulate a pure IBM VGA with no extensions.
To enable access to Radius extensions, Pure Mode must be disabled.
<"Extensions
Enabled">, Extensions Disabled
9595 Main Page
|