Codes 3000 - 9999

Symptom / ErrorFRU / Action
003015XX
Check for missing wrap or terminator plug on the adapter
1. Baseband Adapter
2. Baseband Cable
 
0037 XXXX
This is usually caused by the SCSI controller built into the system board
1. System Board
2. Hard`Disk
3. Hard Disk Cable
 
0046 11XX / 0046 30XX 1. Multiport/2 Interface Board
2. Multiport/2 Adapter
0046 12XX / 0046 13XX
0046 40XX / 0046 41XX
1. Memory Module Package
2. Multiport/2 Adapter
0046 5000 / 0046 13XX 1. Multiport Interface Cable
0046 XXXX
not listed above
1. Multiport/2 Adapter
2. Multiport/2 Interface Board
3. Memory module Package
 
0056 00XX 1. Financial System
2. Controller Adapter
 
0062 XXXX 1. 1st Store Loop Adapter
2. Adapter Cable
0063 XXXX 1. 2nd Store Loop Adapter
2. Adapter Cable
0064 XXXX
See 'Network Service Procedures'
1. Network Adapter
 
0071 XXXX 1. Voice Adapter
0074 XXXX
Adapter jumper in the correct position ? See 'Display Adapter 8514/A'
1. 8514/A Display Adapter
8514/A Memory Module
2. System Board
0075 09XX
Check display
1. Display Adapter (any type)
2. Display (any type)
3. System Board
4. Video Memory
0075 10XX
Check display
1. XGA Adapter
2. Video Memory
0076 XXXX 1. Page Printer Adapter
0078 XXXX 1. High Speed Adapter
0079 XXXX 1. 3117 Adapter
 
0080 0100 to 0080 12XX
System Board Upgrade Model 50, 55 Only
1. Pointing Device (Mouse)
2. System Board
0085 0X00 / 0085 1XXX 1. 80286 Memory Option Adapter /A
2. System Board
0085 2X00 / 0085 1XXX 1. Memory Module Package on the 80286 Memory Adapter /A
2. Adapter Memory
3. System Board
0086 0100 / 0086 02XX 1. Pointing Device (Mouse)
2. System Board
0086 03XX / 0086 04XX 1. System Board
2. Pointing Device (Mouse)
0089 XXXX 1. Music Adapter
 
0091 XXXX 1. Optical Drive
2. Adapter
0096 XXXX
This adapter has cache
1. SCSI Adapter
2. Any SCSI Device
3. System Board

 
Go to PS/2 Errors Mainpage
Go to Errors 1500 - 2999
Go to Errors 10000 - 14999

© 1999 by Peter H. Wendt / pw-software production