1.  Connect all the stuff.
2.  Put Installation CD in the drive and turn the drive power on.
3.  Hit the N40 ON switch and immediately hit Pause then K  (if you
did this right, a black bar will appear just to the left of the error
codes in the readout).......if it doesn't, you have to start again.
4.  A language-select window will appear > 1 > ENTER
5.  The same window will reappear > 99 > ENTER
6.  Main Menu window > press 7 (change soft-keyswitch setting) > ENTER
7.  Soft-keyswitch window > 3 (SERVICE) > ENTER
8.  Soft-keyswith window returns > 99 > ENTER
9.  Main Menu window (again) > 10 (BOOT) > ENTER

Watch the activity light on the CDROM....if it starts blinking
rapidly, you are home free (you lucky bastard):-) 

In about 1 minute you will get black screen with green letters telling
you to define the System Console......

Follow the menu  (I just did this while typing this answer so I know
it works)