|
| Interrups | Categories | Contents |
AH = 12h BX = 0400h.STACK:
DWORD handle of panel object DWORD window's handle (or 0 for current task's window) DWORD length of panel name DWORD pointer to panel name
Return:
STACK: DWORD handle of window which was used DWORD handle of keyboard or 0
Notes: Status of APPLY may be checked with STATUS message. Panel MUST have the following format first byte must be 1Bh (i.e. must start with a stream) first opcode in stream must be E5h single byte arg of opcode is interpreted thus: bits 7,6 11 means create new window 10 means create new field table for existing window 01 means use existing window and field table bit 5 if set, panel contains a field table (creates a new keyboard and puts it in field mode) bit 4 if set, panel contains input fields bit 3 if set, panel contains select fields but no input fields. If the panel contains input or select fields, a keyboard handle is returned; either the window's current open keyboard or a newly-created keyboard object. The caller should read that keyboard to obtain input from the panel.
See Also: AH=12h/BH=84h
Category: DESQview/TopView and Quarterdeck Programs - Int 15h - T
|
| Interrups | Categories | Contents |