|
| Interrups | Categories | Contents |
AX = D102h BX = entry number at which to start searching CX = requested I/O port address DX = 0000h (reserved, must be set to 0) ES:DI -> buffer to contain DDT entry (see #00535)
Return:
AH = return code (see #00534) BX = DDT entry number where I/O port was found, or total entries plus 1 if port was not found. CF set on error CF clear on success ES:DI buffer filled with DDT entry
Desc: The DDT is searched from the specified entry for the I/O port in CX, and the first entry in which it is found is returned
See Also: AH=C0h - AH=C7h - AH=C9h - AX=D100h -
|
| Interrups | Categories | Contents |