|
| Interrups | Categories | Contents |
AX = E902h CX = diagnostic flag mask (see #04091,#04092)
Return:
Nothing
Note: Provided by PhysTechSoft's PTS ROM-DOS and displayed by SETUP.COM. DOS error flags can be assigned by application software.
See Also: AX=E901h - INT 14/AH=05h"PTS ROM-DOS" - INT 14/AH=06h"PTS ROM-DOS"
Bitfields for PhysTechSoft PTS ROM-DOS BIOS error flags: Bit(s) Description (Table 04091) ??? Processor test failed.. Stack test failed.. BIOS code damaged.. Conventional memory test failed.. SRAM test failed.. EMS test failed.. Boot-sector damaged.. Boot-sector read error.. Loader setup damaged.. BIOS setup damaged.
See Also: #04092 - #04093
Bitfields for PhysTechSoft PTS ROM-DOS LOADER error flags:: Bit(s) Description (Table 04092) ??? Processor test failed.. Loader code damaged.. Loader code in RAM damaged.. Loader setup in flash-memory damaged.. BIOS setup in flash-memory damaged.. BIOS offset in flash-memory field damaged.. BIOS size in flash-memory field damaged.. BIOS in flash-memory damaged.. BIOS in ROM damaged.. Last operation field damaged.. Channel error.. Setup in flash-memory damaged.. Loading BIOS from control channel failed.. Loading DOS from control channel failed.
See Also: #04091
Category: Uncatagorized - Int 15h - P
|
| Interrups | Categories | Contents |