|
| Interrups | Categories | Contents |
AL = 03h AH = multiplex number for program
Return:
AL = status 00h not implemented or TSR is not a pop-up 01h can not pop up at this time, try again later 02h can not pop up yet, will do so when able 03h already popped up 04h unable to pop up, user intervention required BX = standard reason code 0000h unknown failure 0001h interrupt chain passes through memory which must be swapped out to pop up 0002h swap-in failed CX = application's reason code if nonzero FFh TSR popped up and was exited by user BX = return value 0000h no return value 0001h TSR unloaded 0002h-00FFh reserved 0100h-FFFFh application-dependent
Note: This function is not valid unless a program is installed on the specified multiplex number; use INT 2D/AL=00h to check
See Also: INT 2D/AL=00h - INT 2D/AL=01h - INT 2D/AL=02h - INT 2D/AL=04h - INT 2D/AL=05h
See Also: INT 2D/AL=06h
Category: TSR Libraries - Int 2Dh - A
|
| Interrups | Categories | Contents |