Int 62/AH=03h

BW-TCP - HW DRIVER (ETHDEV.SYS) - GET REAL IP ADDRESS

AH = 03h DS:SI -> DWORD buffer for IP address

Return:
CF clear if successful CF set on error AL = error code

Range:
INT 4C to INT FB, selected by configuration

Note: The Beame&Whiteside TCP/IP protocol stack uses two consecutive interrupts (62h and 63h by default); the BW-NFS client uses a third consecutive interrupt (64h by default) if it is loaded

See Also: INT 64/AH=01h"BW-NFS"

Category: Network - Int 62h - B

Interrups Categories Contents