|
|
|
 |
| With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle. |
 |
| Note: |
The base is detachable. |
|
| Attaching the Base |
- Place the monitor upside-down on a flat work surface.
- Align the tabs on the base with the corresponding slots on the bottom of the monitor.
- Press the base onto the monitor until the tabs are fully engaged in the slots.
- Push the base toward the front of the monitor until the release latch clicks into the locked position.
* Do not bend the snap.
|
| Removing the Base |
- Squeeze and pull up on the release latch on the base.
- Push the base toward the back of the monitor and lift up to remove the base.
|
| Note: The base will align with the monitor slots in only one position. |
|
