Multimedia Modem v1.00 -> v1.02 upgrade changes: *********************************************************************** NOTE: This is an upgrade to the previous text file for CSDV102. The information is the same, but the instructions have been rewritten so that they are easier to understand. *********************************************************************** To install the files in this CSD, do the following: 1. Create a directory on your hard disk called CSD. Type "MKDIR CSD". 2. Change to the CSD directory. Type "CD CSD". 3. Unzip the CSDV102.ZIP file. Type "PKUNZIP -D x:CSDV102.ZIP", where x is the location of the CSDV102.ZIP file. 4. Type "DIR". The list of files you see should appears as follows: . 5-22-95 5:32p .. 5-22-95 5:32p DOS 6-02-95 3:26p MMPMV211 6-02-95 3:26p MMPMWARP 6-02-95 3:26p OS2 6-02-95 3:26p WINDOWS 6-02-95 3:26p 5. Install the fixes listed below. Each item below explains a fix that was made and then explains how to install the fix. WINDOWS FIXES ------------- 1. The Windows setup program, which runs during installation, has been improved as follows: - OS/2 Warp Fullpack support added. - Improved Mwave Disk Space detection. - Improved Uninstall of Mwave on systems using QEMM and other Memory Managers. - Installs correctly on machines that have Windows on a different drive than DOS. - Improved uninstall...v1.00 left an empty [mwgames.drv] section. - Product section added to the MWAVE.INI file [Product] Name = Multimedia Modem Version= 1.02 To install the fixes: A. Go to the directory where the fixes are located. Type "CD C:\CSD\WINDOWS". CSD is the subdirectory created above, where you unzipped the CSD file. B. Place the Mwave for Windows Disk 1 into the diskette drive. C. Create back up copies of the old files. Type: "RENAME A:SETUP.INS SETUP.BAK" "RENAME A:~INS0762.LIB ~INS0762.BAK" D. Copy the new files onto your diskette. Type: "COPY SETUP.INS A:" "COPY ~INS0762.LIB A:" 2. The full duplex speaker phone has been improved as follows: - Little or no feedback from the microphone through the speakers with this file. - "Wave" noises are no longer present during speaker phone conversations. - Sound quality of speaker phone is improved. To install the fix: A. Create back up copies of the old file. Type: "CD C:\DSP2\MWW\FAXTAM" "RENAME SPK07DX.DSP SPK07DX.BAK" B. Copy the new file onto your system. Type: "COPY C:\CSD\WINDOWS\SPK07DX.DSP" 3. The "Manager" application has been improved as follows: - Gives improved Rapid Resume functionality. - Allows for CD sound through the speakers ONLY if AUX=CD. - Improved volume control on the audio control panel. To install the fix: A. Create back up copies of the old file. Type: "CD C:\DSP2\MWW\MANAGER" "RENAME MEIOSLWW.DRV MEIOSLWW.BAK" B. Copy the new file onto your system. Type: "COPY C:\CSD\WINDOWS\MEIOSLWW.DRV" 4. The configuration program has been improved as follows: - COM IRQ and CD BASE ADDRESS problems fixed. - Copyright changed to 1995 - NEW OBI default setting for the board. To install the fix: A. Create back up copies of the old file. Type: "CD C:\DSP2\SOHO" "RENAME CONFIGW.EXE CONFIGW.BAK" B. Copy the new file onto your diskette. Type: "COPY C:\CSD\WINDOWS\CONFIGW.EXE" DOS FIXES --------- 1. DOS installation has been corrected so that "MWGAMES ON" is the default in your autoexec.bat after installing the Multimedia Modem software. To install the fixes: A. Go to the directory where the fixes are located. Type "CD C:\CSD\DOS". CSD is the subdirectory created above, where you unzipped the CSD file. B. Place the Mwave for DOS Disk 1 into the diskette drive. C. Create back up copies of the old file. Type: "RENAME A:INSTALL.EXE INSTALL.BAK" D. Copy the new file onto your diskette. Type: "COPY INSTALL.EXE A:" OS/2 FIXES ---------- 1. The OS/2 Setup program, which runs during OS/2 installation, has been improved as follows: - Bug fixes for Uninstall - remove Mwave Audio driver for OS/2 V2.11 from CONFIG.SYS. - Product section added to the MWAVE.INI file [Product] Name = Multimedia Modem Version= 1.02 - Checks appropriate min. disk space required to install Mwave for OS/2. - setup.ins allows for variable destination directory name. - Fixed problem where system beeps during Mwave OS/2 installation. - Added product name and default directory name for OS/2 install. These values are required by setup.ins to perform the installation appropriately . To install the fixes: A. Go to the directory where the fixes are located. Type "CD C:\CSD\OS2". CSD is the subdirectory created above, where you unzipped the CSD file. B. Place the Mwave for OS/2 Disk 1 into the diskette drive. C. Create back up copies of the old files. Type: "RENAME A:SETUP.INS SETUP.BAK" "RENAME A:INSTALL.CMP INSTALL.BAK" D. Copy the new files onto your diskette. Type: "COPY SETUP.INS A:" "COPY INSTALL.CMP A:" 2. The full duplex speaker phone has been improved as follows: - Little or no feedback from the microphone through the speakers with this file. - "Wave" noises are no longer present during speaker phone conversations. - Sound quality of speaker phone is improved. To install the fix: A. Create back up copies of the old file. Type: "CD C:\DSP2\MWOS2\DSP" "RENAME SPK07DX.DSP SPK07DX.BAK" B. Copy the new file onto your system. Type: "COPY C:\CSD\OS2\SPK07DX.DSP" 3. The OS/2 configuration program has been improved as follows: - Copyright changed to 1995 - NEW OBI default setting for the board. - the "CD-ROM Type" setting can now be stored. To install the fixes: A. Create back up copies of the old files. Type: "CD C:\DSP2\MWOS2\BIN" "RENAME CONFIGO.EXE CONFIGO.BAK" "RENAME MWBD0700.SYS MWBD0700.BAK" B. Copy the new files onto your system. Type: "COPY C:\CSD\OS2\CONFIGO.EXE" "COPY C:\CSD\OS2\MWBD0700.SYS" 4. The audio installation has been improved as follows: - Auxiliary Control icon is created first before executing MINSTALL.EXE. To install the fixes: FOR WARP USERS: A. Go to the directory where the fixes are located. Type "CD C:\CSD\MMPMWARP". CSD is the subdirectory created above, where you unzipped the CSD file. B. Place the OS/2 WARP Audio Disk 1 into the diskette drive. C. Create back up copies of the old file. Type: "RENAME A:SETUP.CMD SETUP.BAK" D. Copy the new files onto your diskette. Type: "COPY SETUP.CMD A:" FOR OS/2 2.11 USERS: A. Go to the directory where the fixes are located. Type "CD C:\CSD\MMPMV211". CSD is the subdirectory created above, where you unzipped the CSD file. B. Place the OS/2 V2.11 Audio Disk 1 into the diskette drive. C. Create back up copies of the old file. Type: "RENAME A:SETUP.CMD SETUP.BAK" D. Copy the new files onto your diskette. Type: "COPY SETUP.CMD A:"