;***********************************************************************
;*                                                                     *
;* MODEMS.DAT  COPYRIGHT (C) 1991-1993 DATASTORM TECHNOLOGIES, INC.    *
;*                                                                     *
;* This file is used by PCINSTAL to configure PROCOMM PLUS 2.01 for    *
;* specific modems.  PLEASE DO NOT MODIFY!!                            *
;*                                                                     *
;***********************************************************************



Modem "Aceex Designer 9600"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "ATX4 &C1 &D2 &R0 &Y0 %C1^M~~"
   transmit "AT \J0 \N3 \Q3 W1 &K3^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Aceex Designer 14400"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "ATX4 &C1 &D2 &R0 &Y0 %C1^M~~"
   transmit "AT \J0 \N3 \Q3 W1 &K3^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Aceex 1496"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2%C1S7=60S11=55^M~~"
   transmit "AT\J0\N3\Q3\V1W1&K3S95=46^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Adtech Hi-Per 96/144"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3\J0S7=60S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Adtech Hi-Per 96/96"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3\J0S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Adtech Micro 2400 V.42bis" 
   transmit "AT^M~~AT&F^M~~~" 
   transmit "AT&C1&D2\N3\Q3\V1W0S7=60 S11=60^M~~" 
   set baudrate 9600 
   transmit "AT^M~~AT&W^M" 
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Altima 4XX Internal Fax/Data" 
   transmit "AT^M~~AT&F^M~~~" 
   transmit "AT &C1 &D2 L3 W1 \G1 \K1 S7=60 S11=60^M~~" 
   set baudrate 9600 
   transmit "AT^M~~AT&W^M" 
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Amiga 1200RS"
   initstring="ATE1Q0V1X2 S7=60 S11=55 S0=0^M"
   no_connect 4="NO DIAL TONE"
   baudrate=1200


Modem "Amstrad SM2400 (UK)"
   transmit "AT^M~~ATZ^M~~~"
   initstring="ATZ^M~~~AT&C1&D2X2S7=59S11=68^M"
   init_if_cd=1
   baudrate=2400


Modem "AMT Star 2400"
   initstring="ATE1V1Q0X4 &C1&D2 S11=55^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "AMT STAR 9600 (V.42bis)"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2\V2 S0=0^M~~"
   set baudrate 38400
   transmit "AT~&Y0^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "AMT STAR 1442 (V.32bis)"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2\V2 S0=0^M~~"
   set baudrate 57600
   transmit "AT~&Y0^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Anchor Volksmodem 1200"
   initstring="ATE1Q0V1X1 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Anchor 2400E"
   initstring="ATE1Q0V1X4 &C1&D2 S7=30 S0=0^M"
   init_if_cd=1
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   baudrate=2400


Modem "Anchor 96E5"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N5\Q3\V2%C3S11=60S0=0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Anderson-Jacobson 96/32 STH"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 *C1 *LG2 *M2 *E1^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Andest Fax/Data Modem 14.4" 
   transmit "AT^M~~AT&F^M~~~" 
   transmit "AT&C1&D2&K3\J0\N7\V1^M~~" 
   set baudrate 57600
   transmit "AT^M~~AT&W^M" 
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Angia DataSTAR/FaxSTAR 14400"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 %C1 S7=60 S11=60^M~~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Angia DataSTAR/FaxSTAR 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 %C1 S7=60 S11=60^M~~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Apex Data V.32bis Fax Modem"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2%C1\J0\N7\Q3\V2S7=60S11=55^M"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Apex Data V.32 Fax Modem"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2%C1\J0\N7\Q3\V2S7=60S11=55^M"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Apex Data Freedom V.32bis Fax Modem"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2%C1\J0&Q6&K3\V2S7=60S11=55^M"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Apex Data Freedom V.32 Fax Modem"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2%C1\J0&Q6&K3\V2S7=60S11=55^M"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "April Technologies Series 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 %C1 \J0 \N9 \Q3^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "April Technologies Series 14400"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 %C1 \J0 \N9 \Q3^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Archtek SmartLink 14.4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3\N3S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "AT&T 2224 CEO"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\C1~\G0~\J0^M~~"
   transmit "AT\N3~\Q3~\V1^M~~"
   set baudrate 4800
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=4800


Modem "AT&T Model 4000"
   initstring="ATE1Q0V1X1S7=60 S0=0^M"
   no_connect 2="ERROR"
   no_connect 3=""
   no_connect 4=""
   init_if_cd=1
   baudrate=1200


Modem "ATI 2400etc"
   transmit "AT&F1^M~~"
   transmit "AT&C1~&D2~X6~S7=60~S11=60^M~~"
   transmit "ATS9=10~S10=18^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   transmit "AT&Y0^M"
   mnp=1
   initstring="ATZ0^M"
   connect 300="CARRIER"
   connect 1200="CONNECT"
   connect 2400="PROTOCOL"
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   baudrate=9600


Modem "AT&T Dataport 14.4/FAX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2%C1X6\D1\N7\Q3S0=0S7=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "AT&T KeepinTouch Card Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2%C1X6\D1\N7\Q3S0=0S7=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "AT&T Paradyne Comsphere 3820"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 \N5 \D1 \Q3 S7=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "ATI 2400etc V.42"
   transmit "AT&F2^M~~"
   transmit "AT&C1~&D2~X6~S7=60~S11=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   transmit "AT&Y0^M"
   mnp=1
   initstring="ATZ0^M"
   connect 300="CARRIER"
   connect 1200="CONNECT"
   connect 2400="PROTOCOL"
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   baudrate=9600


Modem "ATI 9600etc"
   transmit "AT^M~AT&F2^M~~~"
   transmit "AT&C1~&D2~X6~S7=60~S11=60^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M"
   transmit "AT&Y0^M"
   mnp=1
   initstring="ATZ0^M"
   connect 300="CARRIER"
   connect 1200="CONNECT"
   connect 2400="PROTOCOL"
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   baudrate=19200


Modem "Avatech 2400E"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Bausch Datacom 3522"
   initstring="ATE1Q0V1X4&C1&D2 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   bd=2400


Modem "Bausch Datacom 3522 V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\Q3 \N3 \J0 \V1 \C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Best D.P. 9624 FQ"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Best D.P. 2400/2400Fax Modem"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Best D.P. Smart One 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Best D.P. Smart One 1442"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 W2^M~~"
   transmit "AT S7=60 S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Best D.P. Smart One 9642"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 W2^M~~"
   transmit "AT S7=60 S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Black Box 144FX/144FX-PC"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5\N3S95=43S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55S95=43^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Boca Research 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=60 S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "Boca Research 2400 V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\Q3~\N3~\J0~\V1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Boca Research M2400i"
   initstring="AT&F3^M~~~AT&C1&D2S7=60S11=55^M"
   init_if_cd=1
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Boca Research 14.4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3%C1%E1\N3S95=47^M"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "BSM Quik Com MNP"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\Q3~\J0~\N3~%C1~&C1~&D2~S7=60~S0=0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Cardinal MB2210/MB2450"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "Cardinal MB2296SR"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "Cardinal 2400 V42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3\Q3\J0\C2\V2S7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Cardinal 2450 V42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3\Q3\J0\C2\V2S7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Cardinal 9600 V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 S7=60 S11=55 S95=41^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Cardinal 9650 V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 S7=60 S11=55 S95=41^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Cardinal 14400 V32bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 S7=60 S11=55 S95=41^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Cardinal 14450 V32bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 S7=60 S11=55 S95=41^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Cermetek 1200 Modem/1200 SPC/Security Modem"
   initstring="ATE1Q0V1X2 S7=60 S11=55 S0=0^M"
   init_if_cd=1
   no_connect 4="NO DIAL TONE"
   baudrate=1200


Modem "Cermetek 2400 R/2400 SPC"
   initstring="ATE1Q0V1X4~S7=60 S11=55 S0=0^M"
   init_if_cd=1
   no_connect 4="NO DIAL TONE"
   baudrate=2400


Modem "COM 1 MV 213"
   initstring="ATE1Q0V1X4&E5 S0=0 S7=60^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "COM 1 MV 214"
   initstring="ATE1Q0V1X4&E5 &E1 S0=0 S7=60^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "COM 1 MV 223 / MV 224"
   initstring="ATE1Q0V1X4&E5 &E1 S0=0 S7=60^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "Compaq Enhanced Internal Modem (V.42bis)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~X4~W1~S7=60~S11=60^M~~"
   transmit "AT&Q5~S46=2~&K3~S36=7~&Y0^M"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M"
   mnp=1
   initstring="ATZ^M"
   connect 300="CARRIER"
   connect 1200="CONNECT"
   connect 2400="PROTOCOL"
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   no_connect 3="NO DIAL TONE"
   baudrate=19200


Modem "Compaq SpeedPAQ 144 Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2W2\V1S7=60S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Companion CTS212AH"
   initstring="^Q^M"
   dialcmd="T"
   hangup="^T"
   autoanswer="^Q^M~~R1^M"
   autoanswer_off="^Q^M~~R0^M"
   set modem autobaud off
   set host autobaud off
   connect 300="On Line"
   connect 1200="On Line"
   connect 2400=""
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   no_connect 1="Dead Line"
   no_connect 2="Busy"
   no_connect 3="No Dialtone"
   no_connect 4="Disconnect"
   init_if_cd=1
   baudrate=1200


Modem "Complete Communicator"
   initstring="ATE1Q0V1X4&C1&D2 S0=0^M"
   init_if_cd=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "Complete Communicator GOLD"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5\N3%C1S7=60S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Complete Communicator V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\Q3 \N3 \J0 \V1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Complete Modem Plus"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   init_if_cd=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=2400



Modem "Complete FAX/9624"
   transmit "AT^M~~AT&F3^M~~~"
   transmit "ATW1~&C1~&D2~&K3~\J0~\N3^M~~"
   transmit "AT\Q3~\V1~%C0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Complete PC TurboModem Plus"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT &C1 &D2 \V1 S7=60 S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Compuadd 9600 MNP5"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4&C1&D2%C1\J0\N3\Q3\V1S7=60S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "CompuCom Speedmodem"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT*H1~\N3~\Q3~%C1~&C1~&D1^M~"
   transmit "ATS7=60~S11=55~S0=0~&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "CompuCom Speedmodem STAR"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT*H2 \J0 \N3 \Q3 %C1 &C1 &D2^M~"
   transmit "ATS7=60 S11=55 S0=0 &W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Compudyne 9642"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S7=60~S95=44~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Concord Data CDS 224 Autodial"
   initstring="~^M~^M"
   dialcmd="~^M~^M~DT"
   hangup=""
   autoanswer=""
   autoanswer_off=""
   set modem autobaud off
   set host autobaud off
   connect 300="INITIATING"
   connect 1200="INITIATING"
   connect 2400="INITIATING"
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   no_connect 1="NO ANSWER"
   no_connect 3="VOICE DETECTED"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "CTK Shorty 2400"
   initstring="ATE1Q0V1X4&C1&D2S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "CTK FaxManager"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\Q3\N3%C1\J0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "CTK Shorty V.42bis + Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&K3\N3%C3\J0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "CTK Shorty 14400 + Fax"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT\Q3\N6%C1\C1\J0^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Dacom FASTLANE V32"
   transmit "^M~AT^M~AT&F^M~~~"
   transmit "AT&C1&D2&R0*E1*F3*S1S0=0S7=60^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~AT S0=0S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Dallas Fax 96/96"
   transmit "^M~AT^M~AT&F^M~~~"
   transmit "AT&C1 &D2 W1 S95=41^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~~AT S7=60 S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Dallas Fax 14.4 / 14.4 Pro Plus"
   transmit "^M~AT^M~AT&F^M~~~"
   transmit "AT&C1 &D2 W1 S95=41^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~~AT S7=60 S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Dataflex Pocket Comfax II"
   transmit "^M~AT^M~AT&F3^M~~~"
   transmit "AT&C1&D2\G0\N3\Q3S7=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~AT S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dataflex Pocket Quadcom II"
   transmit "^M~AT^M~AT&F3^M~~~"
   transmit "AT&C1&D2\G0&Q5\N3\Q3S7=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~AT S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dataflex Pocket Quadsync II"
   transmit "^M~AT^M~AT&F3^M~~~"
   transmit "AT&C1&D2\G0&Q5\N3\Q3S7=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~AT S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dataflex Rapier 9600"
   transmit "^M~AT^M~AT&F^M~~~"
   transmit "AT&C1&D2%C1&I1\N3\Q2S7=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~~AT S7=60^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Data Race Action 32 / 32L"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2W1&K3S0=0S7=60S11=55S64=5^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~ATS0=0S7=60S11=55S64=5^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Data Race Action 1496"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2W1&K3S0=0S7=60S11=55S64=5^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~ATS0=0S7=60S11=55S64=5^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Data Race Action 24"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3S0=0S7=60S11=55S64=5^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~ATS0=0S7=60S11=55S64=5^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Data Race RediMODEM 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N7\J0\Q3\V2S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~AT S7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Data Race RediMODEM 14400"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N7\J0\Q3\V2S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~~AT S7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "DataTrek 624 (UK)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~&P1~\N3~\Q3^M~~"
   transmit "AT\J1~S11=75^M~~"
   set baudrate 2400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "DataTrek 624 (US)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\N3~\Q3^M~~"
   transmit "AT\J1~S11=75^M~~"
   set baudrate 2400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "DataTrek 2424 (MNP)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\N3~\Q3^M~~"
   transmit "AT\J1^M~~"
   set baudrate 2400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "DataTrek V.32"
   transmit "AT^M~~AT&F^M~~~~"
   transmit "AT&C1&D2&Y0\J0\N3\Q3\V1^M~~"
   transmit "AT%C2S134=4S7=60S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "DataTrek Elite M/FM/SFM"
   transmit "AT^M~~AT&F^M~~~~"
   transmit "AT&C1&D2&Y0\J0\N3\Q3\V1%C2S134=5^M~~"
   transmit "ATS7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "DataTrek 2496CFM PCMCIA"
   transmit "AT^M~~AT&F^M~~~~"
   transmit "AT&C1&D2&Y0\J0\N3\Q3\V1%C2S134=5^M~~"
   transmit "ATS7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "DEC DF296-DA (DECmodem V32)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 %A1 %F2 $M2 $C1^M"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Dell Data/Fax 24/96V"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~&K3^M~~"
   transmit "AT\V1~S7=60~S11=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dell Data/Fax 96/96V"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "AT&C1 &D2 \N7 \Q3^M~~"
   transmit "AT\V2 S7=60 S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Delta Gold DM 1200"
   initstring="ATE1Q0V1X4 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Digicom Connection 96+"
   transmit "AT^M~~AT&F^M~~~"
   tx "AT&C1&D2&K3\N5S7=60^M~~"
   setbd 57600
   tx "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Digicom DSI9624 LE"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT*F3~*E1~&C1^M~"
   transmit "AT S0=0~S7=60~S11=55^M~"
   set baudrate 19200
   transmit "AT^M~"
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Digicom DSI9624 LE Plus"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT*F3~*E9~&C1^M~"
   transmit "AT S0=0~S7=60~S11=55^M~"
   set baudrate 38400
   transmit "AT^M~"
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Digicom DSI9624PC"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&R0*E1*F3*M1*S0^M~~"
   transmit "AT S0=0 S7=60^M~"
   set baudrate 19200
   transmit "AT^M~"
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Digicom Eagle V.32"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&R0*E9*F3*M2*N3*S1S7=60S0=0^M~~"
   set baudrate 38400
   transmit "AT^M~~~AT&W^M"
   initstring="ATZ^M~~~ATS0=0S7=60^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Digicom Eagle V.32+"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&R0*E9*F3*M2*N6*S1S7=60S0=0^M~~"
   set baudrate 57600
   transmit "AT^M~~~AT&W^M"
   initstring="ATZ^M~~~ATS0=0S7=60^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Digicom Scout"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&R0*E9*F3*M2*N3*S0S7=60S0=0^M~~"
   set baudrate 38400
   transmit "AT^M~~~AT&W^M"
   initstring="ATZ^M~~~ATS0=0S7=60^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Digicom Scout Plus"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&R0*E9*F3*M2*N6*S0S7=60S0=0^M~~"
   set baudrate 57600
   transmit "AT^M~~~AT&W^M"
   initstring="ATZ^M~~~ATS0=0S7=60^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Digital Scholar Plus"
   transmit "ENAT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 %A1 %F2^M"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ENATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Digitan Hi-IQ (ZX1896) Fax Modem"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Digitan DS92M Fax Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\Q3\N7\V1S7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Direct Connect"
   initstring=""
   baudrate=9600


Modem "Dowty Mayze 96/96R"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4 &C1 &D2 &Q6 %R1 S0=0 S7=60^M"
   transmit "AT%K2 -E5 %C1^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M~~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Dowty Quantum 96"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &I1 &K2 &E1 S7=60^M"
   set baudrate 38400
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M~~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Dowty Quattro PC"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &E1 &K2 S0=0^M"
   set baudrate 9600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dr. Neuhaus Fury PC Junior/Fax 2400"
   initstring="ATE1Q0V1X4&C1&D2S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "Dr. Neuhaus Fury 2400 PC/TI"
   initstring="ATE1Q0V1X4&C1&D2S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "Dr. Neuhaus Fury 2400 PC/TI + MNP"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\Q3\N3\J0\V1\T0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dr. Neuhaus Fury 2402 TI"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\Q3\N3\J0\V1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dr. Neuhaus Fury 2403 TI"
   transmit "AT^M~~AT&F3^M~~~"
   transmit "AT&C1&D2^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dr. Neuhaus Fury 2400 Pocket/Fax"
   transmit "AT^M~~AT&F3^M~~~"
   transmit "AT&C1&D2^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dr. Neuhaus Fury 2400 PC/Fax"
   transmit "AT^M~~AT&F3^M~~~"
   transmit "AT&C1&D2^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dr. Neuhaus Fury Card 2400"
   transmit "AT^M~~AT&F3^M~~~"
   transmit "AT&C1&D2^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dr. Neuhaus Faxy 9600"
   transmit "AT^M~~AT&F3^M~~~"
   transmit "AT&C1&D2^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Dr. Neuhaus Fury 9600 TI"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N6\V1\Q3^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Dr. Neuhaus Fury 9601 TI"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3\V1\Q3^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Dr. Neuhaus Fury 14.4 TI"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N6\V1\Q3^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Dr. Neuhaus Fury 14.4 TI/SL"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3\V1\Q3^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Dynalink 1414VH"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3%C1&K3&Q9S7=60S11=55S95=43^M"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Dynalink 9696VH"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3%C1&K3&Q9S7=60S11=55S95=43^M"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Elsa MicroLink 14.4 Series"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4&C1&D2\Q3\N3%C3S7=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Elsa MicroLink 2440T/2440TR"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4&C1&D2\Q3\N3%C3S7=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Elsa MicroLink ISDN/PC"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4&C1&D2\Q3^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Elsa MicroLink ISDN/TL"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4&C1&D2\Q3^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Elsa MicroLink 9624T2VX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT X4&C1&D2S0=0&R6&E4^M~~"
   transmit "AT$BA0$MB9600^M~~"
   set baudrate 38400
   transmit "AT^M~~AT$MB9600^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Elsa MicroLink 2400T2VX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT X4&C1&D2S0=0&R6&E4$BA0^M~~"
   set baudrate 38400
   transmit "AT^M~~AT$MB9600^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Elsa MicroLink 2410 w/MNP-5"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT X4&C1&D2S0=0&R6&E1$BA0$SB9600^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Elsa MicroLink 2410 w/V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT X4&C1&D2S0=0&R6&E1$BA0$SB9600^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Elsa MicroLink 2410 (no MNP)"
   initstring="ATE1Q0V1X4 &C1&D2^M"
   init_if_cd=1
   baudrate=2400


Modem "E-Tech Bullet PC2400MH"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~$E1~$F4^M~~"
   set baudrate 4800
   transmit "~AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=4800


Modem "E-Tech Bullet E2400M"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~$E3~$F4~$V5~$S1^M~~"
   set baudrate 19200
   transmit "~AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS0=0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "E-Tech Bullet E9696M"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~$E3~$F4~$X4~$S0^M~~"
   set baudrate 38400
   transmit "~AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "E-Tech Bullet PC9696M"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~$E1~$F4~$S1^M~~"
   set baudrate 19200
   transmit "~AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS0=0S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "ETech P1496MX Pocket Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2$E3$F4$S0^M~~"
   set baudrate 38400
   transmit "~AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS0=0S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Everex Evercom 12e"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=1200


Modem "Everex Evercom 24e"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=2400


Modem "Everex II-24"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=60^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Everex EV941"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATE1~V1~Q0~X4~&C1~&D2^M~~"
   transmit "AT&I1~&Y0~&W0^M"
   initstring="ATZ0^M~~ATS7=60 S11=55^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "Everex Evercom 24e+ (MNP 5)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\Q3~\C1~\N3~\J0~\V1^M~~"
   set baudrate 9600
   transmit "~AT^M~~AT&W0^M"
   initstring="ATZ0^M~~ATS7=60 S11=55^M"
   mnp=1
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Everex Carrier 24"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\Q3~\N3~\J0~\V1^M~~"
   set baudrate 9600
   transmit "~AT^M~~AT&W0^M"
   initstring="ATZ^M~~AT S7=60~S11=60^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Everex Carrier 24/96"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2^M~~"
   transmit "AT\Q3~\N3~\J0~\V1~\C1^M~~"
   set baudrate 9600
   transmit "~AT^M~~AT&W0^M"
   initstring="ATZ0^M~~AT S7=60~S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Everex EverFax 24/96E"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2^M~~"
   transmit "AT\Q3~\N3~\J0~\V1^M~~"
   set baudrate 9600
   transmit "~AT^M~~AT&W0^M"
   initstring="ATZ^M~~AT S7=60~S11=60^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Everex 96E+"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "AT&C1~&D2~\V2~W1^M~~"
   transmit "ATS7=60~S11=55^M~~"
   set baudrate 38400
   transmit "~AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Fabritech CTS 212AH Companion"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Fastcomm 2496/Turbo"
   transmit "AT^M~~ATZ^M~~"
   transmit "AT#F~#E~E0~#CL2~#CH1~#CW~#LCN~#LDN^M~~"
   transmit "ATS0=0~S2=43~S6=1~S7=60~S10=10^M~~"
   transmit "ATS11=60~S22=54~S49=6^M~~"
   transmit "ATS57=0~S58=0~S16=128~S177=224~S178=192~S16=0^M~~"
   transmit "ATE1~Q0~V1~X2~B3~M1^M~~"
   transmit "AT#W^M~~~~"
   transmit "ATZ^M~~~~"
   set baudrate 9600
   transmit "AT^M~~"
   transmit "AT^M~~"
   mnp=1
   initstring=""
   dialcmd="AT^M~~~~ATDT"
   no_connect 4="DATA TIME OUT"
   baudrate=9600


Modem "Fastcomm 9696"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S0=0~&H1~&I1~&M6^M~~"
   transmit "ATS7=60~S11=6~S10=2^M~"
   transmit "AT&W^M~~"
   set baudrate 19200
   transmit "AT^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Forval IM14400"
   transmit "AT^M~~AT&F^M~~~~"
   transmit "AT&C1~&D2~&Y0^M~~"
   transmit "AT\J0~\N3~\Q3~\V1^M"
   transmit "ATS7=60~S11=55~&W^M"
   initstring="ATZ0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Frecom Winfast 14400"
   transmit "^M~AT^M~~AT&F^M~~"
   transmit "AT&C1 &D2 *LG2 *M2 *V1 *E1^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="AT%M0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Frecom Winfast 9600"
   transmit "^M~AT^M~~AT&F^M~~"
   transmit "AT&C1 &D2 *LG2 *M2 *V1 *E1^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="AT%M0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Garvin Super Modem 14.4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Gateway 2000 Telepath"
   transmit "^M~AT^M~~AT&F^M~~"
   transmit "AT&C1&D2W2S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Gateway 2000 Telepath 550"
   transmit "AT^M~~AT&F^M~~"
   transmit "ATX4&B1&C1&D2&H1&K1&R2S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "General DataComm 596"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATQ0~E1~V1~&C1~&D2~S0=0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "General Datacomm 596 V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT \Q3 &C1&D2 W1^M~"
   transmit "AT \V2 S7=60 S11=60^M~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M~~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "GRID 14.4 Fax Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N7%C1\Q3\J0\V2S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "GVC Super Modem 2400"
   alias="GVC 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "GVC Super Modem 2400 MNP-5"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\V1~%C1~\C1~\J0~\N3~\Q3^M~~"
   transmit "AT&Y0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~ATS0=0 S7=60 S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "GVC Super Modem 9600 V.32"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "ATX4~&C1~&D2~S0=0^M~~"
   transmit "AT%C1~\C1~\G0~\J0~\N6~\Q3~\V1^M"
   set baudrate 38400
   transmit "AT~&Y0^M~~AT&W^M"
   initstring="ATZ0^M~~ATS11=55~S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "GVC 14400 V.42bis"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2\V1^M"
   set baudrate 57600
   transmit "AT~&Y0^M~~AT&W^M"
   initstring="ATZ0^M~~ATS11=55~S7=60S0=0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Hayes Accura 144"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2&Q5&K3^M~~"
   transmit "ATS38=0S95=42S7=60S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Hayes Accura 96"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2&Q5&K3^M~~"
   transmit "ATS38=0S95=42S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Hayes Accura 24 EC"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2&Q5&K3^M~~"
   transmit "ATS38=0S95=42S7=60S11=60^M~~"
   set baudrate 2400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "Hayes Compatible 1200 Baud Modem"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=1200


Modem "Hayes Compatible 2400 Baud Modem"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Hayes Personal Modem 1200"
   initstring="ATE1Q0V1X4&C1&D2 S0=0^M"
   hangup="~~~+++~~~ATH^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=1200


Modem "Hayes Personal Modem 2400"
   initstring="ATE1Q0V1X4&C1&D2 S0=0^M"
   hangup="~~~+++~~~ATH^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=2400


Modem "Hayes Smartmodem 1200/1200B"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   init_if_cd=1
   baudrate=1200


Modem "Hayes Smartmodem 2400/2400B"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Hayes Smartmodem V Series 2400/2400B"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S7=60~S11=55^M~~"
   set baudrate 4800
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=4800


Modem "Hayes Smartmodem V Series 9600/9600B/9600 V.32"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S7=60~S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Hayes Optima 2400"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1~&D2~&K3^M~~"
   transmit "ATW1~S95=42^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Hayes Optima 9600"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1~&D2~&Q5~&K3^M~~"
   transmit "ATW2~S38=0~S95=42^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Hayes Optima 14400 Fax"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1 &D2 &Q9 &K3^M~~"
   transmit "ATW2 S37=0 S38=0 S95=46^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Hayes Optima 288 V.FC + Fax"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2&K3&Q9W2^M~~"
   transmit "ATS37=0S38=0S95=46S7=60S11=55^M~~"
   set baudrate 115200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=115200


Modem "Hayes Ultra 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M"
   mnp=1
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Hayes Ultra 14400"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~W1S38=0S7=60S11=55^M~~"
   set baudrate 38400
   transmit "~AT^M~~AT&W0^M"
   mnp=1
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Hayes V Series 2400/2400B V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~&K3~S7=60~S11=55^M~~"
   set baudrate 4800
   transmit "AT^M~~AT&Y0^M~~"
   transmit "AT&W0^M~~"
   mnp=1
   initstring="ATZ0^M~~AT&Q5 S36=3^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=4800


Modem "Hayes V Series 9600/9600B V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~&K3~S7=60~S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&Y0^M~~"
   transmit "AT&W0^M"
   mnp=1
   initstring="ATZ0^M~~AT&Q5 S36=7^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Hayes ISDN Terminal Adaptor"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~&K3~S7=60~S11=55^M~~"
   transmit "AT%A1=0~%A2=2~%A0=2~W1^M"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Hidem 14400FAX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATW2\N6S0=0^M~~~"
   set baudrate 57600
   transmit "~AT&W^M~~~"
   initstring="ATZ^M~~~ATS0=0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Hidem 14400P/FAX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATW2\N6S0=0^M~~~"
   set baudrate 57600
   transmit "~AT&W^M~~~"
   initstring="ATZ^M~~~ATS0=0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Hidem 14400DLX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATW2\N6S0=0^M~~~"
   set baudrate 57600
   transmit "~AT&W^M~~~"
   initstring="ATZ^M~~~ATS0=0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Hidem 9600" 
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATW2\N6S0=0^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M~~~"
   initstring="ATZ^M~~~ATS0=0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Hidem 2442"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATS0=0\N7^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M~~~"
   initstring="ATZ^M~~~ATS0=0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Hidem 2400"
   initstring="AT&FS0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "Hidem 1200"
   initstring="AT&FS0=0^M"
   no_connect 4="ERROR"
   init_if_cd=1
   baudrate=1200


Modem "IBM DataFax Highspeed 14.4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0\N3&K3&Q5%C3W1S7=60S11=55^M"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "IBM N51 Laptop 14400"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0\N7\Q3\V2%C1S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "IBM N51 Laptop 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0\N7\Q3\V2%C1S7=60S11=60^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "IBM PCjr Internal Modem"
   initstring="^NF 4^M"
   dialcmd="^ND"
   hangup="^NH^M"
   autoanswer="^NC 5,M^M"
   autoanswer_off="^N 4,M^M"
   set modem autobaud off
   set host autobaud off
   connect 300="CONNECTED"
   connect 1200=""
   connect 2400=""
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   no_connect 1="UNSUCCESSFUL"
   no_connect 2="BUSY"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=300


Modem "IBM Modem 1200 (5841)"
   initstring="AT^M~~ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="ABORT"
   no_connect 4=""
   init_if_cd=1
   baudrate=1200


Modem "IBM PC 2400 bps Modem"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=2400


Modem "IBM PS/2 Data/Fax Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\Q3~\N3~\J0~\V1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=9600


Modem "IBM 7855 Model 10"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~&AL8~&B8N1^M~~"
   transmit "AT&I0~&M0~\D0~\R2^M~~"
   transmit "AT%H0~%L2~S0=0\M14^M~~"
   set baudrate 19200
   transmit "~AT^M~~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="ERROR"
   baudrate=19200


Modem "Identity ID9600"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT\N6~&C1~&D2~\J0~S7=60~S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Identity 14400"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT\N6&C1&D2\J0S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Image Twincom 96/42i"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~&K3~\N3~\G0^M~~"
   transmit "ATS95=41~S11=60~S7=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Image Twincom 144/DF"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&Q5 S95=46 S11=55 S7=60^M~~"
   set baudrate 57600
   transmit "~AT^M~~AT&W0^M~~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Incomm 2405"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 \J0 \N3 \Q3\V1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Incomm 9600/9605"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 \J0 \N3 \Q3\V1^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "InfoMate 212A/PC"
   initstring="~ ~ ~XY~^NP ~60^M"
   dialcmd="~ ~ XY^ND `T"
   dialsuf="`^M"
   hangup="^NE^M"
   autoanswer="^NC 1^M"
   autoanswer_off="^NC 0^M"
   set modem autobaud off
   set host autobaud off
   init_if_cd=1
   baudrate=1200


Modem "InfoMate 212X/PC"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "InfoRunner 2496 Fax Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 &R0 \N7 %C1 \V1^M~~"
   transmit "AT \J0 \Q3 &K3 S7=54 S11=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=54S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Infotel 14.4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATW1~S95=41~S11=55~S7=60^M~~"
   set baudrate 57600
   transmit "~AT^M~~AT&W0^M~~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Infotel 9600"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2S0=0 S11=60 S7=60^M~~"
   set baudrate 38400
   transmit "~AT^M~~AT&W0^M~~~"
   initstring="ATZ^M~~~ATS0=0S11=55S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Intecom PDI-1000/S"
   tx "AT^M~~AT&F^M~~~"
   tx "AT&C1 &D2 &K3 X4 S7=60 S11=60^M~~"
   set baudrate 9600
   tx "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60 S11=60^M"
   mnp=1
   dcmd="ATD"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   bd=9600


Modem "Intel 2400B"
   initstring="ATE1V1Q0X4 &C1&D2 S11=55^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Intel 2400B MNP"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\Q3~\N3~\J0~\V1~\C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Intel 2400EX MNP"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\Q3\N3\J0\V1\C1S7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Intel 9600EX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2^M~~"
   transmit "AT\Q3\N3\J0\V1\C1%C0S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Intel 14.4EX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&T5S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Intel 14.4/14.4 Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0\N3\Q3\V2S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Intel SatisFAXtion 400"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&T5S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Intel SatisFAXtion 200"
   transmit "^M~AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\Q3\V1\N3S7=60S11=55^M"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Intel SatisFAXtion 100"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "Intel SatisFAXtion Board"
   transmit "AT^M~~~~AT&F^M~~~"
   transmit "AT\C1~S11=55^M~~"
   set baudrate 4800
   transmit "AT^M~~AT&Y0^M~~"
   transmit "AT&W0^M"
   initstring="ATZ0^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=4800


Modem "Intelligent Modem Series 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 %C1 \J0 \N3 \Q3 \V1^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Intertex Data/Fax 2400"
   transmit "^M~AT^M~~AT&F^M~~"
   transmit "AT&C1&D2&K3\J0\N3^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Intertex Data/Fax 14400"
   transmit "^M~AT^M~~AT&F^M~~"
   transmit "AT&C1&D2&K3\J0\N3^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Inwave Hurricane 14400 Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5\N3%C1S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Lasat unique 24/96 Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2S38=0S7=60S95=2W0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S38=0S95=2^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Lasat Credit 144"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2S38=0S7=60S95=2W0^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S38=0S95=2^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Modem "Lasat 144 Series"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2S38=0S7=60S95=2W0^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S38=0S95=2^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "LCE-123 Series"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S0=0^M"
   connect 1="CONNECT^M"
   connect 2="CONNECT "
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=1200


Modem "LCE-124 Series"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   connect 1="CONNECT^M"
   connect 2="CONNECT "
   connect 3="CONNECT 2400"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "LCE-125 Series"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "ATE1~V1~X4~&C1~&D2^M~~"
   transmit "AT&K3~\N6~S7=60~S11=65^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "LCE-132 P"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "ATE1~V1~X4~&C1~&D2^M~~"
   transmit "AT&K3~&Q5~\N6~S7=60~S11=65^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Lightning LightCom 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=2400


Modem "Lightning LightCom 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S7=60~S11=55^M~~"
   transmit "ATS36=7~S95=43^M~"
   set baudrate 38400
   transmit "AT^M~~AT&W0~&Y0^M"
   initstring="ATZ0^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Lightning LightCom 14.4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S7=60~S11=55~W2^M"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Logicode Quicktel 2400H"
   initstring="ATE1Q0V1X4&C1&D2S7=60S11=55^M"
   init_if_cd=1
   baudrate=2400


Modem "Logicode Quicktel 2400X"
   initstring="ATE1Q0V1X4&C1&D2S7=60S11=55^M"
   init_if_cd=1
   baudrate=2400


Modem "Logicode Quicktel M2400X"
   initstring="ATE1Q0V1X4&C1&D2S7=60S11=55^M"
   init_if_cd=1
   baudrate=2400


Modem "Logicode Quicktel 9624LH"
   initstring="ATE1Q0V1X4&C1&D2S7=60S11=55^M"
   init_if_cd=1
   baudrate=2400
   ;Rockwell RPI-based modem


Modem "Logicode Quicktel 9624LX"
   initstring="ATE1Q0V1X4&C1&D2S7=60S11=55^M"
   init_if_cd=1
   baudrate=2400
   ;Rockwell RPI-based modem


Modem "Logicode Quicktel M9624LX"
   initstring="ATE1Q0V1X4&C1&D2S7=60S11=55^M"
   init_if_cd=1
   baudrate=2400
   ;Rockwell RPI-based modem


Modem "Logicode Quicktel 9624LP"
   initstring="ATE1Q0V1X4&C1&D2S7=60S11=55^M"
   init_if_cd=1
   baudrate=2400
   ;Rockwell RPI-based modem


Modem "Logicode Quicktel M9624LP"
   initstring="ATE1Q0V1X4&C1&D2S7=60S11=55^M"
   init_if_cd=1
   baudrate=2400
   ;Rockwell RPI-based modem


Modem "Logicode Quicktel 2400 V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2%C1&K3\N3S7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Logicode Quicktel 96HV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Logicode Quicktel 96XV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Logicode Quicktel M96XV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Logicode Quicktel 9696HV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Logicode Quicktel 9696XV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Logicode Quicktel M9696XV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Logicode Quicktel 14.4HV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Logicode Quicktel 14.4XV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Logicode Quicktel M14.4XV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Logicode Quicktel 1414HV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Logicode Quicktel 1414XV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Logicode Quicktel M1414XV"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&K3S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Macronix MX-14.4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATW2&C1&D2\N3&K3&Q5S7=60S11=60S95=46^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Maxwell Modem 300PC/300V"
   initstring="ATE1Q0V1S0=0^M"
   no_connect 3=""
   no_connect 4=""
   init_if_cd=1
   baudrate=300


Modem "Maxwell Modem 1200PC/1200V"
   initstring="ATE1Q0V1X1S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Maxwell Modem 1200VP"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Maxwell Modem 2400PC"
   initstring="ATE1Q0V1X1 S7=30 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "MegaHertz AR196FM"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0\N3\Q3\V1S7=60S11=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Megahertz CC3144"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&Q5&K3%C3S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "MegaHertz EasyTalk 1200"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "MegaHertz EasyTalk 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Megahertz T396FM"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "AT&C1&D2\Q3%C1&S1S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Megahertz T3144"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2W2\J0\N7\Q3%C1\V2^M~~"
   transmit "AT%B14400S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Megahertz P224FMV"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2&Q5&K3^M~~"
   transmit "ATS95=42S7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Megahertz C524FM"
   transmit "AT^M~~AT&F3^M~~"
   transmit "AT&C1&D2\J0\N3\Q3^M~~"
   transmit "ATS7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Megahertz P296FMV (AA Battery Version)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3\J0\Q3%C1^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Megahertz P296FMV (9-Volt Battery Version)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&Q5&K3%C3S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Megahertz P2144 (AA Battery Version)"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "AT&C1&D2\Q3W2\V2%B14400%C1^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Megahertz P2144 (9-Volt Battery Version)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&Q5&K3%C3S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Megahertz C5144 Fax/Modem"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "AT&C1&D2W2&R2\C1\Q3%C1\V2S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Megahertz C596FM"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2W2\J0\N7\Q3%C1\V2^M~~"
   transmit "AT%B9600S7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Megahertz XJ124FM"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&Q5&K3%C3S7=60S11=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Megahertz XJ1144"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3&Q5&K3%C3S7=60S11=60^M~~"
   set baudrate 38400
   tx "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Micc 4824 V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\Q3S7=60S11=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~~ATS7=60 S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Microtest LANMODEM"
   initstring="AT^M"
   init_if_cd=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   bd=9600


Modem "Microcom AX/2400 MNP4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\J0~\Q3~\N3~S0=0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=2400


Modem "Microcom AX/2400c MNP5"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~M1~\G0~\J0~\Q3~\N3~S0=0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Microcom AX/9600 Plus"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\J0~\N3~\Q3~\V1^M~~"
   set baudrate 19200
   transmit "AT^M~~ATS7=54~&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Microcom AX/9612c"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\J0~\Q3~\N3~S0=0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Microcom AX/9624c"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\J0~\Q3~\N3~S0=0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Microcom QX V.32c"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\J0~\Q3~\N3~%C3~-Q2~S7=60~S0=0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M~~"
   transmit "AT*W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Microcom QX 2400t"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1~&D2^M~~"
   transmit "AT \Q3~\N3~\V1^M~~"
   transmit "AT %C3~\C1~\J0~S7=60^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Microcom QX/4232bis+"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0%C2^M~~"
   transmit "AT%G0\N3\Q3\V2^M~~"
   set baudrate 57600
   transmit "AT^M~~ATS7=60*W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Microcom QX/4232hs"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0%C2^M~~"
   transmit "AT%G0\N3\Q3\V2^M~~"
   set baudrate 19200
   transmit "AT^M~~ATS7=60~*W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Microcom DeskPorte FAST"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0\Q3\N3%C3S0=0S11=55\V1^M~~"
   set baudrate 57600
   transmit "AT^M~~AT*W^M~~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Microcomputer Research Mr. Modem MR-144"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2S11=55S7=60S0=0^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Microcomputer Research Mr. Modem MR-96"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2S11=55S7=60S0=0^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Miracom Keycard 2400"
   initstring="ATE1V1X4 &C1&D2 S7=60^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="UNOBTAINABLE"
   init_if_cd=1
   baudrate=2400


Modem "Miracom Keycard 3000"
   initstring="ATE1V1X1 &C1&D2 S7=59 S23=1^M"
   no_connect 3="ERROR"
   no_connect 4=""
   init_if_cd=1
   baudrate=2400


Modem "Miracom WS4000/PC"
   initstring="ATE1V1X1 S7=59 S23=1^M"
   no_connect 3=""
   no_connect 4=""
   init_if_cd=1
   baudrate=300


Modem "Miracom Courier 2400"
   initstring="ATE1Q0V1X6&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Miracom Courier 2400e/ 2400e/ps"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B6~&H1~&R2~S7=60~S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Miracom Courier 2400PC"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B7^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&H1~&R2~S7=60~S11=55^M~~"
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Miracom Courier HST"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B1~&H1~&R2~S7=60~S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Miracom Courier HST V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B1~&H1~&R2~&M4~&A3~S7=60~S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   no_connect 4="NO DIAL TONE"
   initstring="ATZ^M"
   baudrate=19200


Modem "Miracom Courier HST-ASL"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&H1~&R2~&K3~&B1~&A3~X7^M~~"
   transmit "ATS7=60~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Miracom Sportster 9600/PC"
  transmit "AT^M~~AT&F^M~~"
  transmit "ATX4&B1 &C1 &D2 &H1 &K3 &R2 S7=60 S11=55^M~~"
  set baudrate 38400
  transmit "AT^M~~AT&W^M"
  initstring="ATZ^M"
  mnp=1
  no_connect 3="NO DIAL TONE"
  no_connect 4="NO ANSWER"
  baudrate=38400


Modem "Miracom V.32"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&H1~&R2~&B1^M~~"
   transmit "AT S7=60~S0=0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Miracom V.32bis-ASL"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&H1~&R2~&K3~&B1~&A3~X7^M~~"
   transmit "ATS7=60~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Miracom Dual Standard"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B1~&H1~&R2~S7=60~S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 4="NO DIAL TONE"
   baudrate=38400


Modem "Miracom Dual Standard V.32bis-ASL"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&H1~&R2~&K3~&B1~&A3~X7^M~~"
   transmit "ATS7=60~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Miracom Sportster 14.4"
  transmit "AT^M~~AT&F^M~~"
  transmit "ATX4&B1 &C1 &D2 &H1 &K3 &R2 S7=60 S11=55^M~~"
  set baudrate 57600
  transmit "AT^M~~AT&W^M"
  initstring="ATZ^M"
  mnp=1
  no_connect 3="NO DIAL TONE"
  no_connect 4="NO ANSWER"
  baudrate=57600


Modem "Motorola-Codex 2260"
   initstring="AT&F^M~~~AT&C1&D2*DL0&R0^M"
   init_if_cd=1
   baudrate=9600


Modem "Motorola-Codex 2264"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1~&D2~*FL3~*XC1~*PT0~&R0^M~~"
   set baudrate 19200
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Motorola-Codex 3220"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~*XC2~*RS0^M~~"
   transmit "AT*FL3~*MD0~*MF0~L3~S7=60^M~~"
   transmit "ATS10=5^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Motorola-Codex 3260 Series"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~*XC2~*RS0~*CT0^M~~"
   transmit "AT*FL3~*MD0~*MF0~L3~S7=60^M~~"
   transmit "ATS10=5^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Motorola Codex 326XFAST (57.6K)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATS7=60 S11=55^M~~"
   transmit "AT&C1&D2 *XC2 *FL3 *CD3 *AA5 *DE16^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600

Modem "Motorola Codex 326XFAST (115.2K)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATS7=60 S11=55^M~~"
   transmit "AT&C1&D2 *XC2 *FL3 *CD3 *AA5 *DE21 &W^M~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=115200


Modem "MultiTech MultiModem 224/224PC"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "MultiTech MultiModem 224E/224EC"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT~Q0~V1~&C1~&D2~&E1~&E4~&E7~&E13^M~~"
   transmit "ATX4~$SB9600~$BA0~$A1~S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT$MB2400^M~~"
   transmit "AT&W0^M"
   mnp=1
   initstring="ATZ0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "MultiTech MultiModem II MT224"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&RF1&E4 X4S7=60S11=55S0=0^M~~~"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M~~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "MultiTech MultiModem 224E7 V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2Q0~&E1~&E4~&E7~&E13^M~~"
   transmit "ATX4~$SB19200~$BA0~$A1~S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT$MB2400^M~~"
   transmit "AT&W0^M"
   mnp=1
   initstring="ATZ0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "MultiTech MultiModem V.32"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2B0~&E1~&E4~&E7~&E13^M~~"
   transmit "ATX4~$SB19200~$BA0~$A1~S7=60~S11=55~S0=0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT$MB9600^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "MultiTech MultiModem V.32 EAB V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2B0~&E1~&E4~&E7~&E13^M~~"
   transmit "ATX4~$SB19200~$BA0~$A1~S7=60~S11=55~S0=0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT$MB9600^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "MultiTech MultiModem II MT932BA"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&RF1~X4~S7=55~S11=60~S0=0^M~~~"
   set baudrate 38400
   transmit "AT^M~~~AT&W^M~~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "MultiTech MultiModem II MT1432"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&RF1X4~S7=60~S11=55~S0=0~^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "MultiTech MultiModem 696E"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~X4~S0=0~S7=60~S11=60^M~~"
   transmit "AT&E1~&E4~&E7~&E13~&E14^M~~"
   transmit "AT&R0~$MB9600~$A1~$A1^M~~"
   transmit "AT$BA0~$SB19200^M~~"
   set baudrate 19200
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "NCR Enhanced 14400 Fax Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 \J0 \N7 \Q3 \V2^M~~"
   transmit "ATS7=60 S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "NEC 14.4 Kbps Data/Fax Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2X6\D1\N7\Q3S85=1^M~~"
   transmit "ATS7=60 S11=55S0=0^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M~~~ATS7=60S11=55S0=0S85=1^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "NEC N2431/2431C"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &E0 S7=60 S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M~~~AT<^M~C1^M~T1^M~Q^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "NEC N2435"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&R0\Q3\N6\J0\V1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "NEC 9631"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &R0 \N3 \Q3 \V1^M~~"
   transmit "ATS7=60 S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "NEC PC-20-66 14.4 Data/Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3\J0\N7\Q3\V2%C1^M~~"
   transmit "ATS7=60 S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Novation Professional 2400"
   initstring="ATE1Q0V1X3YC0YF1YT0 S7=45 S0=0^M"
   no_connect 4="NO TONE"
   init_if_cd=1
   baudrate=2400


Modem "Novation Smart-Cat 103/212"
   initstring="~%N ^N ~^N~S~2 ~^N~C~0 ^M"
   dialcmd="~^N~D~ ~"
   hangup="~~~^N~H ^M"
   autoanswer="~~~^N~C~1 ^M"
   autoanswer_off="~~~^N~C~0 ^M"
   set modem autobaud off
   set host autobaud off
   connect 300="READY"
   connect 1200="READY"
   connect 2400="READY"
   connect 4800="READY"
   connect 9600="READY"
   connect 19200="READY"
   connect 38400="READY"
   no_connect 1="BUSY"
   no_connect 2="NO DIAL"
   no_connect 3="UNSUCC"
   no_connect 4="CONN LOST"
   init_if_cd=1
   baudrate=1200


Modem "Nuvotel 96424IFX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&Q5\N3&K3S7=60S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600
  

Modem "Nuvotel 14400I"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55S95=41^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Nuvotel 14400IFX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55S95=41^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Nuvotel 9600I"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55S95=41^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Nuvotel 9600IFX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55S95=41^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Nuvotel Pegasus 14400E"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55S95=41^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Nuvotel Pegasus 14400EFX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55S95=41^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Nuvotel Pegasus 9600E"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55S95=41^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Nuvotel Pegasus 9600EFX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55S95=41^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Octocom OSI 8324A"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &I1 *E1 &E1 &K2^M~~"
   transmit "AT S0=0 S7=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Octocom OSI 8396A"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &I1 *E1 &E1 &K2^M~~"
   transmit "AT S0=0 S7=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Octocom OSI 8196A"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &I1 *E1 &E1 &K2^M~~"
   transmit "AT S0=0 S7=60^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Okidata CLP 296"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\V1~\Q3~\J0~\C1~^M~~"
   transmit "ATS7=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&Y0^M"
   transmit "AT&W0^M"
   mnp=1
   initstring="ATZ0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Okidata Okitel 2400 Plus"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\V1~\N3~\Q3~\J0~\C1^M~~"
   transmit "ATS7=60~S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&Y0^M"
   transmit "AT&W0^M"
   mnp=1
   initstring="ATZ0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Okidata Okitel 1200/1200B"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=1200


Modem "Okidata Okitel 2400/2400B"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Okidata Okitel 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\C1~\J0~&K3~\N3^M~~"
   set baudrate 19200
   transmit "AT^M~"
   transmit "AT\Q3~&W^M"
   initstring="ATZ2^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Pace Linnet 1200"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&W^M"
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="ERROR"
   init_if_cd=1
   baudrate=1200


Modem "Pace Linnet 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=70^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Pace Linnet PC Card (300 baud)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&W^M"
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="ERROR"
   init_if_cd=1
   baudrate=300


Modem "Pace MicroLin Fx"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3%C3&K3S7=58S95=41^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Pace MicroLin Quad Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N3%C3&K3S7=58S95=41^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Pace Linnet Quad 32"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&A1&I1&K1^M~~"
   transmit "AT\C5\N0\P2\Q0~S7=60S11=75^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Pace Series Four"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1  ;set for mnp to allow speed buffering
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Pace Ultralink Quad"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&A1~&E2~&I1~&K1^M~~"
   transmit "AT\C4~\N0~\P1~\Q0^M~~"
   transmit "ATS7=60~&W^M~~"
   set baudrate 9600
   transmit "AT^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Pace Ultralink 32"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&A1~&E2~&I1~&K1^M~~"
   transmit "AT\C4~\N0~\P1~\Q0^M~~"
   transmit "ATS7=60~&W^M~~"
   set baudrate 19200
   transmit "AT^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "PC Logic 19200/Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\J0&K3\N3%C1\V1S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~~"
   initstring="ATZ~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "PC Logic 14400/Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &K3 &Q9 \N3 %C1^M~~"
   transmit "ATS7=60 S11=55 S95=34^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "PC Logic 96I"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5\N3%C1^M~~"
   transmit "ATS7=60S11=55S95=34^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M~~"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Penril Datalink 1200"
   initstring="ATE1V1X1Q0 S7=60^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=1200


Modem "Penril Datalink 2400"
   initstring="ATE1V1X4Q0 S7=60^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Penril Alliance V.32 Series"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\D1~\C4~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Penril DLX V.32M"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\Q1\V1S0=0S7=60^M"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M~~"
   initstring="ATZ^M~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Penril DLX 14.4K"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\Q1\V1S0=0S7=60^M"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M~~"
   initstring="ATZ^M~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "PerfectData 14400"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 \N3 %C1 \V2 \Q3 S11=60^M"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M~~"
   initstring="ATZ^M~~~ATS11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "PerfectData 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 \N3 %C1 \V2 \Q3 S11=60^M"
   set baudrate 19200
   transmit "AT^M~~AT&W0^M~~"
   initstring="ATZ^M~~~ATS11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Piiceon Dispatcher 14400"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "AT &C1 &D2 \N7 W2 \V2 %C1 \Q3 \J0^M~~"
   transmit "AT S7=60 S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Piiceon Dispatcher 9696"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "AT &C1 &D2 \N7 W2 \V2 %C1 \Q3 \J0^M~~"
   transmit "AT S7=60 S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Practical Peripherals Practical Modem1200"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=1200


Modem "Practical Peripherals Practical Modem2400"
   initstring="ATE1Q0V1X4&C1&D2 S11=55 S0=0 S7=60^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=2400


Modem "Practical Peripherals 2400SA"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=2400


Modem "Practical Peripherals 2400 Pocket Modem"
   initstring="AT&C1&D2 S11=60 S7=60 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   dialcmd="~~~~ATDT"
   init_if_cd=1
   baudrate=2400


Modem "Practical Peripherals 2400SA MNP"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT X4~&C1~&D2^M~~"
   transmit "AT\Q3~\N3~\J0~\V1^M"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   mnp=1
   initstring="ATZ^M~~~ATS7=60 S11=55^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Practical Peripherals 2400SA V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="AT&F^M~~~AT&C1&D2^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Practical Peripherals PM9600SA V.32"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S7=60~S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~ATS95=44~&Y0^M~~"
   transmit "AT&W0^M"
   initstring="ATZ0^M"
   mnp=1
   connect 300="CARRIER"
   connect 1200="CONNECT"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Practical Peripherals PM9600FXMT"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&Q5&K3S7=60S95=45S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Practical Peripherals PM14400FXSA"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~W1~S7=60~S95=41~S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Practical Peripherals PM14400FXMT"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5W2S7=60S95=41S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Premier Innovations P2400 / P2400E"
   initstring="AT&F^M~~~ATS7=60^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Prometheus Pro Modem 1200"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Prometheus 2400 MCT-24I Half-card"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Prometheus 9600 Plus"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT*F3^M"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Prometheus ProModem Ultima"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT*S1~*N6~*F3~*M1^M~~"
   transmit "ATS0=0~S7=60~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Prometheus Ultima Home Office"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1&D2\Q3\J0\N3\V1%C1^M~~"
   transmit "AT S7=60 S11=60 S0=0^M~~"
   set baudrate 38400
   transmit "AT^M~~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Psion Dacom Gold PC3"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom Gold PC4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0%C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom Gold PC4 Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0%C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom PDM 3"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom PDM 4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0%C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom PDM 4 Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0%C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom PDM30"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom PDM40"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0%C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom PDM40F"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF3X4&C1&D2&I1&J2&K2&R0%C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom PDM50F"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF8X4&C1&D2&Q5&K3&R0\N3%C3W2^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Psion Dacom PDM60F"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATF8X4&C1&D2&Q5&K3&R0\N3%C3W2^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "PureData PDMCIA 2400"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\V2 S7=60 S11=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "QuickComm 14.4"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT S7=60~S0=0~*F3^M~~"
   set baudrate 38400
   transmit "AT^M~~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "QuickComm Spirit II"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 X4 *E9 *F3 *N6 S7=60 S0=0^M~~"
   set baudrate 57600
   transmit "AT^M~~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "QVC 14.4"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2%C1\J0\N6\Q3S0=0S7=60S11=60\V1^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS0=0S7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Racal-Datacom RMD 2412" 
   transmit "AT^M~~AT&F^M~~~" 
   transmit "AT&C1&D2X4*C1*D1*E1*L1S0=0S7=60S11=60^M~~" 
   set baudrate 9600 
   transmit "AT^M~~~AT&W^M" 
   initstring="ATZ^M~~~ATS7=60S11=55^M" 
   mnp=1 
   no_connect 3="NO ANSWER" 
   no_connect 4="NO DIALTONE" 
   baudrate=9600 


Modem "Racal-Datacom RMD 2412/2" 
   transmit "AT^M~~AT&F^M~~~" 
   transmit "AT&C1&D2X4*C1*D1*E1S0=0S7=60S11=60^M~~" 
   set baudrate 9600 
   transmit "AT^M~~~AT&W^M" 
   initstring="ATZ^M~~~ATS7=60S11=55^M" 
   mnp=1 
   no_connect 3="NO ANSWER" 
   no_connect 4="NO DIALTONE" 
   baudrate=9600 


Modem "Racal-Datacom RMD 3221"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX9&C1&D2*F2^M~~"
   transmit "ATS7=60S11=55S0=0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Racal-Milgo RMD 3222"
   transmit "AT^M~~~AT&F^M~~~"
   transmit "ATX4&C1&D2\N3\Q1\B1^M~~"
   transmit "ATS7=60S11=55S0=0^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Racal-Datacom ALM 3223"  
   transmit "AT^M~~AT&F^M~~~"  
   transmit "AT &C1 &D2 \Q1 L1 S7=60 S11=55^M~~"  
   set baudrate 38400  
   transmit "AT^M~~~AT&W^M"  
   initstring="ATZ^M~~~ATS7=60S11=55^M" 
   mnp=1 
   no_connect 3="NO ANSWER" 
   no_connect 4="NO DIALTONE" 
   baudrate=38400 


Modem "Racal-Datacom ALM 3226" 
   transmit "AT^M~~AT&F^M~~~" 
   transmit "AT&C1&D2W2L2S0=0S7=60^M~~" 
   set baudrate 57600 
   transmit "AT^M~~~AT&W^M" 
   initstring="ATZ^M~~~ATS0=0S7=60^M" 
   mnp=1 
   no_connect 3="NO ANSWER" 
   no_connect 4="NO DIALTONE" 
   baudrate=57600 


Modem "Racal-Datacom ALM 3264"  
   transmit "AT^M~~AT&F^M~~~"  
   transmit "AT &C1 &D2 \Q1 L1 S7=60 S11=55^M~~"  
   set baudrate 38400  
   transmit "AT^M~~~AT&W^M"  
   initstring="ATZ^M~~~ATS7=60S11=55^M" 
   mnp=1 
   no_connect 3="NO ANSWER" 
   no_connect 4="NO DIALTONE" 
   baudrate=38400 


Modem "Racal-Vadic 1200PA"
   initstring="AT&F^M~~~AT&C1~&D2^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=1200


Modem "Racal-Vadic 2400/PS"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT*F2~&C1~&D2~*E1^M~~"
   transmit "AT&Y0^M~~"
   transmit "AT&W0^M"
   mnp=1
   initstring="ATZ0^M~~ATS7=60S11=55^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   baudrate=2400


Modem "Racal-Vadic 2400LC"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~*E1~*F2~*P1~S7=60~S11=55^M~~"
   transmit "AT&Y0^M~~"
   transmit "AT&W0^M"
   mnp=1
   initstring="ATZ0^M~~ATS7=60S11=55^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   baudrate=2400


Modem "Racal-Vadic LC2400PC"
   initstring="ATZ^M~~~ATS7=60~S11=55^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Racal-Vadic 2400PA"
   initstring="^E^M~~O^M~1^M~1^M~4^M~2^M~~^M"
   dialcmd="^E^M~~~D^M~"
   hangup="^CD^M"
   autoanswer=""
   autoanswer_off=""
   set modem autobaud off
   set host autobaud off
   connect 300="ON LINE"
   connect 1200="ON LINE"
   connect 2400="ON LINE"
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   no_connect 1="BUSY!"
   no_connect 2="FAILED CALL"
   no_connect 3="TIME OUT"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Racal-Vadic 2400PA Model 2"
   transmit "AT^M~~AT&F^M~~~~"
   transmit "AT&C1~&D2~X4~*E1~*L1~*Q1~*F2~*P1^M"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   baudrate=2400



Modem "Racal-Vadic 2400VP"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~*C1~&D2~*E1~*F2~Y1~~S7=60~*Q1~S11=55^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=2400


Modem "Racal-Vadic 9600VP"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~*C1~&D2~*F2~Y1~*Q1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M~~~ATS7=60^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Racal-Vadic 9632PA"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S7=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Racal-Vadic VA212"
   transmit "^E^M~~O^M~~1^M~~3^M~~1^M~~"
   transmit "2^M~~16^M~~2^M~~17^M~~2^M~~"
   transmit "19^M~~9^M~~^M"
   initstring="^E^M"
   dialcmd="^E^M~~D^M~"
   dialsuf="~~^M~~^M"
   hangup ="I^M~~~I^M~~~"
   autoanswer="^E^M~~O^M~~19^M~1^M~^M"
   autoanswer_off="^E^M~~O^M~~19^M~9^M~^M"
   set modem autobaud off
   set host autobaud off
   connect 300="ON LINE"
   connect 1200="ON LINE"
   connect 2400=""
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   no_connect 1="FAILED"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Racal-Vadic VA3451"
   initstring="^E^M"
   dialcmd="D^M~~"
   hangup =""
   autoanswer_off=""
   autoanswer=""
   set modem autobaud off
   set host autobaud off
   connect 300="ON LINE"
   connect 1200="ON LINE"
   connect 2400=""
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   no_connect 1="FAILED"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "ROLMphone 244PC"
   initstring="ATE1Q0V1X1%P0%C1S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Shiva NetModem/E"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATS7=60~S11=55~S12=1^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M~~~"
   initstring="ATZ^M~~~ATS11=55~I68^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "SmartLink 9600UM"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4 &C1 &D2 &R0 &Y0 &M5 %C1^M~~"
   transmit "AT \J0 \N5 \Q3^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Spartan 14.4 Turbo"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2S11=55S7=60S0=0^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~~"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600
      
      
Modem "Starlit Designer 9600"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "ATX4 &C1 &D2 &R0 &Y0 &M5 %C1^M~~"
   transmit "AT \J0 \N3 \Q3 W1 &K3^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Supra Modem 2400"
   initstring="ATE1Q0V1X4 &C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=2400


Modem "Supra 2400 MNP"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1~%C0~S11=60^M~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Supra 2400 Plus (V.42bis)"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1~%C0~\V2~S11=60^M~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M~~~ATS7=60^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Supra 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2^M~~"
   transmit "AT\Q3~\N3~\J0~\V1~\C1~%C0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M~~ATS7=60S11=55^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Supra FaxModem 14.4"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "ATW1~S7=60~S11=55~S95=41^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Synappsys 14.4"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "AT&C1&D2%C1\J0\N6\Q3S0=0S7=60S11=60\V1^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS0=0S7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Sysdyne MDM 24H"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Tandy 1200-bps Half Card"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=1200



Modem "Telebit Internal PC Card w/ MNP"
   set baudrate 19200
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT~S11=60~S51=5~S58=2~S66=1~S95=2^M~~"
   mnp=1
   initstring="AT S11=60 S51=5 S58=2 S66=1 S95=2^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Telebit T1000"
   set baudrate 19200
   transmit "AT&F^M~~"
   set baudrate 9600
   transmit "AT&F^M~~"
   transmit "AT S51=5^M~~"
   set baudrate 19200
   transmit "AT^M~~ATS11=55~S52=1~S54=2~S58=2~S66=1^M~~"
   transmit "ATS68=2~S95=2~S131=1^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Telebit T1500 or T2500 - V.42 mode"
   set baudrate 9600
   transmit "AT&F^M~~"
   set baudrate 19200
   transmit "AT&F^M~~"
   transmit "AT~S11=60~S50=6~S51=254~S52=1~S131=1~S58=2^M~~"
   transmit "AT~S66=1~S97=1~S106=1&W^M~~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Telebit T1500 or T2500 - MNP mode"
   set baudrate 9600
   transmit "AT&F^M~~"
   set baudrate 19200
   transmit "AT&F^M~~"
   transmit "AT~S11=60~S50=6~S51=254~S52=1~S131=1~S58=2^M~~"
   transmit "AT~S66=1~S95=2~&W^M~~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Telebit T1600"
   set baudrate 19200
   transmit "AT&F^M~~~"
   set baudrate 38400
   transmit "AT&F^M~~~"
   transmit "AT~S11=60~S51=253~&C1~&D2~L1~X12~S58=2^M~~"
   transmit "AT~S59=15&W^M~~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=38400


Modem "Telebit T2000"
   set baudrate 19200
   transmit "AT&F^M~~"
   set baudrate 9600
   transmit "AT&F^M~~"
   transmit "AT S51=5^M~~"
   set baudrate 19200
   transmit "ATS11=55~S52=1~S53=1~S58=2~S66=1~S68=2^M~~"
   transmit "ATS95=2~S110=1^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Telebit T3000 (57.6K baud)"
   set baudrate 38400
   transmit "AT&F^M~~~ATS51=7^M~~"
   set baudrate 57600
   transmit "AT~S11=60~&C1~&D2~L1~X12~S58=2^M~~"
   transmit "AT~S59=15~&W^M~~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=57600


Modem "Telebit T3000 (38.4K baud)"
   set baudrate 19200
   transmit "AT&F^M~~"
   set baudrate 38400
   transmit "AT&F^M~~"
   transmit "AT~S11=60~S51=253~&C1~&D2~L1~X12~S58=2^M~~"
   transmit "AT~S59=15~&W^M~~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=38400


Modem "Telebit Trailblazer / Trailblazer Plus"
   set baudrate 9600
   transmit "AT&F^M~~"
   set baudrate 19200
   transmit "AT&F^M~~"
   transmit "AT S131=1 S11=60~S51=5~S52=1~S53=1^M"
   transmit "ATS58=2~S66=1~&W^M~~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "Telebit QBlazer"
   set baudrate 19200
   transmit "AT&F^M~~"
   set baudrate 38400
   transmit "AT&F^M~~"
   transmit "AT~S11=60~S51=252~&C1~&D2~L1~X4~S58=2^M~~"
   transmit "AT~S59=15~&W^M~~"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=38400

Modem "Telebit Worldblazer"
   transmit "AT^M~~"
   set baudrate 38400
   transmit "AT^M~~~AT&F9^M~~~"
   transmit "AT X12 &C1 &D2 S59=15 S50=0 S51=7^M~~~"
   set baudrate 57600
   transmit "ATS190=1^M~~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=57600


Modem "Telecraft Pocket Genius 14400"
   transmit "AT^M~~AT&F2^M~~~"
   transmit "ATS7=60S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Telsat 12/2447"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S0=0^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   init_if_cd=1
   baudrate=2400


Modem "Telsat 12/2472 MNP"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "AT\N3~&K2~&R2~&M0^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 4800
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=4800


Modem "Telsat 12/2481"
   initstring="ATE1Q0V1X4&C1&D2&S1 S7=60 S0=0^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=2400


Modem "Telsat 12/2482"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "AT\N0~&K2~&R2~&M0^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 4800
   transmit "AT&M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=4800


Modem "Telsat 12/2482 MNP"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "AT\N3~&K2~&R2~&M0^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 4800
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=4800


Modem "Telsat 12/2491"
   initstring="ATE1Q0V1X4&C1&D2&S1 S7=60 S0=0^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=2400


Modem "Telsat 12/2492"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "AT\N0~&K2~&R2~&M0^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 4800
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=4800


Modem "Telsat 12/2492 MNP"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "AT\N3~&K2~&R2~&M0^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=2400


Modem "Telsat 2223"
   initstring="ATE1Q0V1X1&C1&D2&S1 S7=60 S0=0^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=1200


Modem "Telsat 9662"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 9600
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Telsat 9662 MNP"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "AT\N3~&K3~S7=60~S0=0^M~~~"
   set baudrate 19200
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Telsat 9682/D"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 9600
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Telsat 9682/D MNP"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2^M~~~"
   transmit "AT\N3~&K3^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 19200
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Telsat 9692/D"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2&R0^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 9600
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=9600


Modem "Telsat 9692/D MNP"
   transmit "AT^M~~~AT&F^M~~~
   transmit "ATE1Q0V1X4&C1&D2&R1^M~~~"
   transmit "AT\N3~&K3^M~~~"
   transmit "ATS7=60~S0=0^M~~"
   set baudrate 19200
   transmit "AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=19200


Modem "Texas Instruments V.32bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1&D2W2\V1%C1\J0\N7\Q3^M~~"
   transmit "ATS7=60 S11=60^M"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M~~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Texas Instruments 9600 V.32/V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2W2\V1%C1\J0\N7\Q3^M~~"
   transmit "AT S7=60 S11=55^M"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M~~~"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIALTONE"
   baudrate=38400


Modem "Toshiba T144 D/F"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2\N7\J0\Q3\V2S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Toshiba T24D/X"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT &C1 &D2 W1 X4 &K3 &Q5 &R0 \G0 \N3^M~~"
   transmit "AT %C1 S7=60 S11=60^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M~~~"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Touchbase Worldport 2496"
   initstring="ATE1Q0V1X4&C1&D2S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Touchbase Worldport V.32 Pocket Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 S7=60 S11=60^M~~"
   transmit "AT\N3 \Q3 \J0 \V1^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60 S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Universal Data Systems Fastalk 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Twinhead 2400 V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 X4 \N3 %C2 W2 &Q5^M~~"
   transmit "AT S36=7 S46=138 S48=7 S7=60 S11=55^M"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS11=55 S7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "UDS FasTalk FAX32bx" 
   transmit "AT^M~~AT&F^M~~~" 
   transmit "AT&C1 &D2 \Q3 &R0 S7=60^M~~" 
   set baudrate 38400
   transmit "AT^M~~AT&W^M" 
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "UDS FasTalk 32bx" 
   transmit "AT^M~~AT&F^M~~~" 
   transmit "AT&C1 &D2 \Q3 &R0 S7=60^M~~" 
   set baudrate 38400
   transmit "AT^M~~AT&W^M" 
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "UDS Fastalk V.32/V.42"
   transmit "AT^M~AT&F^M~~~"
   transmit "AT&C1&D2%B9600C^M~~"
   transmit "AT%C1\C1\J0\N3\Q3^M~~"
   set baudrate 38400
   transmit "AT&Y~&W^M~~"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "UDS V.3224/V.3225"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~%B6~\N3~\C1~\J0~\Q3^M~~"
   transmit "AT%C0~\V1~S0=0^M"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "UDS V.3227"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~%B6~\N7~\C1~\J0~\Q3^M~~"
   transmit "AT\V1~S0=0^M"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "UDS V.3229"  
   transmit "AT^M~~AT&F^M~~~"  
   transmit "AT&C1 &D2 \Q3 S0=0 S7=60^M"  
   set baudrate 57600 
   transmit "AT^M~~AT&W^M"  
   initstring="ATZ^M" 
   mnp=1
   no_connect 3="NO DIALTONE" 
   no_connect 4="NO ANSWER" 
   baudrate=57600 


Modem "UDS Sync-Up V.32/5"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &R0 %B9600C %C1 \N3^M~~"
   transmit "AT\J0 \Q3 S0=0 S7=60^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "UDS LanFast"
   initstring="AT^M"
   init_if_cd=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   bd=9600


Modem "Unisys 9600"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 %C1 \J0 \N3 \Q3 \V1^M~~"
   transmit "AT S7=60^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "US Robotics Sportster 1200/1200 PC"
   initstring="ATE1Q0V1X2 S7=60 S11=55 S0=0^M"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "US Robotics Sportster 2400/2400 PC"
   initstring="ATE1Q0V1X6&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "US Robotics Sportster 2400 V.42bis"
  transmit "AT^M~~AT&F^M~~"
  transmit "ATX4&B1 &C1&D2&H1&K1&R2S7=60 S11=55^M~~"
  set baudrate 9600
  transmit "AT^M~~AT&W^M"
  initstring="ATZ^M"
  mnp=1
  no_connect 3="NO DIAL TONE"
  no_connect 4="NO ANSWER"
  baudrate=9600


Modem "US Robotics Sportster 9600/PC"
  transmit "AT^M~~AT&F^M~~"
  transmit "ATX4&B1 &C1 &D2 &H1 &K3 &R2 S7=60 S11=55^M~~"
  set baudrate 38400
  transmit "AT^M~~AT&W^M"
  initstring="ATZ^M"
  mnp=1
  no_connect 3="NO DIAL TONE"
  no_connect 4="NO ANSWER"
  baudrate=38400


Modem "US Robotics Sportster 14.4"
  transmit "AT^M~~AT&F^M~~"
  transmit "ATX4&B1 &C1 &D2 &H1 &K3 &R2 S7=60 S11=55^M~~"
  set baudrate 57600
  transmit "AT^M~~AT&W^M"
  initstring="ATZ^M"
  mnp=1
  no_connect 3="NO DIAL TONE"
  no_connect 4="NO ANSWER"
  baudrate=57600


Modem "US Robotics 2400PC"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "US Robotics 2400PC MNP"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4~&K0~&H1~&R2^M~~"
   transmit "ATS7=60~S11=60~S0=0^M~~"
   set baudrate 9600
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "US Robotics Courier 2400"
   initstring="ATE1Q0V1X6&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "US Robotics Courier 2400e/ 2400e/ps"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B6~&H1~&R2~S7=60~S11=55^M~~"
   set baudrate 9600
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "US Robotics Courier 2400PC"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B7^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&H1~&R2~S7=60~S11=55^M~~"
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "US Robotics Courier HST"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B1~&H1~&R2~S7=60~S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "US Robotics Courier HST V.42"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B1~&H1~&R2~&M4~&A3~S7=60~S11=55^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   no_connect 4="NO DIAL TONE"
   initstring="ATZ^M"
   baudrate=19200


Modem "US Robotics Courier HST-ASL"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&H1~&R2~&K3~&B1~&A3~X7^M~~"
   transmit "ATS7=60~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "US Robotics V.32"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&H1~&R2~&B1^M~~"
   transmit "AT S7=60~S0=0^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "US Robotics V.32bis-ASL"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&H1~&R2~&K3~&B1~&A3~X7^M~~"
   transmit "ATS7=60~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "US Robotics Dual Standard"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX6~&B1~&H1~&R2~S7=60~S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 4="NO DIAL TONE"
   baudrate=38400


Modem "US Robotics Dual Standard V.32bis-ASL"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&H1~&R2~&K3~&B1~&A3~X7^M~~"
   transmit "ATS7=60~S11=60^M~~"
   set baudrate 38400
   transmit "AT^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "US Robotics Dual Standard 16.8"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &H1 &R2 &K3 &B1 &A3 X7^M~~"
   transmit "ATS7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "US Robotics Dual Standard V.32 Terbo"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 &H1 &R2 &K3 &B1 &A3 X7^M~~"
   transmit "ATS7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "US Robotics Worldport 2496"
   initstring="ATE1Q0V1X4&C1&D2S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "US Robotics WorldPort 14.4"
   transmit "AT^M~~AT&F^M~~"
   transmit "ATX4&B1&C1&D2&H1&K1&R2S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60 S11=55^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "US Robotics Worldport V.32 Pocket Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1 &D2 S7=60 S11=60^M~~"
   transmit "AT\N3 \Q3 \J0 \V1^M~~"
   set baudrate 19200
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~ATS7=60 S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "US Robotics WorldPort 9696 Fax Modem"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&A3X4&B1&C1&D2&H1&K1&R2S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60 S11=55^M"
   mnp=1
   no_connect 3="NO DIAL TONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "USA General 14400FX"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2W1S7=60S95=41S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Ven-Tel 212Plus"
   transmit "^M^M~~"
   transmit "O^M~~Y^M~~N^M~~N^M~~Y^M~~N^M~~N^M~~"
   transmit "Y^M~~Y^M~~Y^M"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   set modem autobaud off
   set host autobaud off
   connect 300="ON LINE"
   connect 1200="ON LINE"
   connect 2400=""
   connect 4800=""
   connect 9600=""
   connect 19200=""
   connect 38400=""
   no_connect 3="DEAD PHONE"
   init_if_cd=1
   baudrate=1200


Modem "Ven-Tel Halfcard"
   initstring="ATE1Q0V1X4 S7=60 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Ven-Tel Halfcard 24"
   initstring="ATE1 Q0 V1 X4 S7=30 S0=0^M"
   no_connect 3="ERROR"
   no_connect 4="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Ven-Tel MCM 144"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1&D2&K3&Q5S7=60S11=55^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Ven-Tel 2400 Plus II"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1~&D2~S7=60~S11=55~S0=0^M~~"
   transmit "AT \N3~\Q3~%C1~\C1^M~~"
   transmit "AT \G0~\J0~\V1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Ven-Tel 9600 Plus / Plus II"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT &C1~&D2~S7=60~S11=55~S0=0^M~~"
   transmit "AT *S0~%F2~\N3~\Q3~%C1~\V1^M~~"
   set baudrate 19200
   transmit "AT &Y1~&W1"
   mnp=1
   initstring="ATZ1^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "Ven-Tel PCM2400E"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~X4~E1^M~~"
   transmit "AT\N3~\Q1~\G1~\V1"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   mnp=1
   initstring="ATZ^M~~ATS7=60 S11=55^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=9600


Modem "Ven-Tel Pathfinder"
   set baudrate 19200
   transmit "AT&F^M~~"
   set baudrate 9600
   transmit "AT&F^M~~"
   transmit "AT S51=5^M~~"
   set baudrate 19200
   transmit "ATS11=55~S52=1~S53=1~S58=2~S66=1~S68=2^M~~"
   transmit "ATS95=2~S110=1^M~~"
   transmit "AT&W^M"
   mnp=1
   initstring="ATZ^M"
   no_connect 3="NO ANSWER"
   no_connect 4="NO DIAL TONE"
   baudrate=19200


Modem "ViVa 24 & 2496if"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "ViVa 24fx & 24i/fx"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "ViVa 24m"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\J0~\N3~\V1~\Q3^M~~"
   set baudrate 9600
   transmit "~AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "ViVa 24im"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2S7=60S11=55^M~~"
   set baudrate 9600
   transmit "~AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "ViVa 2442i"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT\J0~\V1~\Q3^M~~"
   set baudrate 19200
   transmit "~AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=19200


Modem "ViVa 9642e"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~S36=7~S38=0^M"
   set baudrate 38400
   transmit "~AT^M~~ATS95=44~&W^M"
   initstring="ATZ^M~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "ViVa 9642i"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1~&D2~\J0~S36=7~S38=0^M"
   set baudrate 38400
   transmit "~AT^M~~ATS95=44~&W^M"
   initstring="ATZ^M~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "ViVa 14.4/FAX (pre-1994)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3S36=7S38=0^M"
   set baudrate 57600
   transmit "~AT^M~~ATS95=44~&W^M"
   initstring="ATZ^M~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "ViVa 14.4/FAX (1994)"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2S7=60S11=55^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Wang 14/14i"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&K3&Q5\N3S7=60S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W^M~"
   initstring="ATZ^M~~~ATS7=60S11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Zeos Notebook Modem"
   transmit "AT^M~~AT&F^M~~"
   transmit "AT&C1~&D2~X3^M~~"
   transmit "AT\Q3~\N3~\J0~\V1~\C1~%C1^M~~"
   set baudrate 9600
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60^M~~~ATS11=60^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Zoltrix ZX1896"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   init_if_cd=1
   baudrate=2400


Modem "Zoltrix 2400 (No MNP)"
   initstring="AT&FE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Zoltrix 96/24 V.42bis"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATE1Q0V1X4&C1&D2S7=60S11=55S0=0\Q3\N9^M"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=9600


Modem "Zoltrix 9600 V.42bis"
   transmit "AT^M~~AT&F1^M~~~"
   transmit "ATX4 &C1 &D2 &M5 &K3 &R0 &Y0 %C1^M~~"
   transmit "AT \J0 \N3 \Q3 W1^M~~"
   set baudrate 38400
   transmit "AT^M~~AT&W^M"
   initstring="ATZ^M~~~ATS7=60S11=55^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Zoltrix 96/144"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D3&R0&Y0S7=60S11=55S36=7^M~~~ATS95=43\Q3\N9^M~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Zoltrix 96/96"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&Y0S7=60S11=55S95=43^M~"
   set baudrate 38400
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ0^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


 Modem "Zoltrix 14.4 Data/Fax"
   transmit "AT^M~~AT&F^M~~~"
   transmit "ATX4 &C1 &D2 &Q5 &K3 &Y0 %C1^M~~~"
   transmit "AT\N3 W2 S7=60 S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600


Modem "Zoom Modem PC 1200"
   initstring="ATE1Q0V1X1 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIAL TONE"
   init_if_cd=1
   baudrate=1200


Modem "Zoom Modem PC 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Zoom Fax Modem 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   no_connect 3="NO DIAL TONE"
   init_if_cd=1
   baudrate=2400


Modem "Zoom Fax Modem PKT 2400"
   initstring="ATE1Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M"
   init_if_cd=1
   baudrate=2400


Modem "Zoom 2400 V.42bis (no fax)"
      transmit "AT^M~~AT&F^M~~~"
      transmit "AT&C1&D2S7=60S11=55S36=7S95=43^M"
      set baudrate 9600
      transmit "AT^M~~AT&Y0&W0^M"
      initstring="ATZ^M"
      mnp=1
      no_connect 3="NO DIALTONE"
      no_connect 4="NO ANSWER"
      baudrate=9600


Modem "Zoom 2400 FCV/FXV Fax Modem"
      transmit "AT^M~~AT&F^M~~~"
      transmit "AT&C1&D2S7=60S11=55^M"
      set baudrate 9600
      transmit "AT^M~~AT&Y0&W0^M"
      initstring="ATZ^M"
      mnp=1
      no_connect 3="NO DIALTONE"
      no_connect 4="NO ANSWER"
      baudrate=9600


Modem "Zoom 2400 FCV+ Fax Modem"
      transmit "AT^M~~AT&F^M~~~"
      transmit "AT&C1&D2S7=60S11=55^M"
      set baudrate 9600
      transmit "AT^M~~AT&Y0&W0^M"
      initstring="ATZ^M"
      mnp=1
      no_connect 3="NO DIALTONE"
      no_connect 4="NO ANSWER"
      baudrate=9600


Modem "Zoom 2400 AMC/AMX (no fax) Modem"
   initstring="AT&FX4&C1&D2S7=60S11=55^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "Zoom 2400 AMC/AMX/PKT Fax Modem"
   initstring="AT&FX4&C1&D2S7=60S11=55^M"
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=2400


Modem "Zoom VP/VX 9600 (no fax)"
      transmit "AT^M~~AT&F^M~~~"
      transmit "AT&C1&D2&K3S7=60S11=55S95=43^M~"
      set baudrate 38400
      transmit "AT^M~~AT&W0^M"
      initstring="ATZ^M"
      mnp=1
      no_connect 3="NO DIALTONE"
      no_connect 4="NO ANSWER"
      baudrate=38400


Modem "Zoom VFP/VFX 9600 Fax Modem"
      transmit "AT^M~~AT&F^M~~~"
      transmit "AT&C1&D2&K3S7=60S11=55S95=43^M~"
      set baudrate 38400
      transmit "AT^M~~AT&W0^M"
      initstring="ATZ^M"
      mnp=1
      no_connect 3="NO DIALTONE"
      no_connect 4="NO ANSWER"
      baudrate=38400


Modem "Zoom VFDI/VFDX 2400 Modem"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&C1&D2&Q5%C3\J0S7=60S11=55S95=43^M~"
   set baudrate 9600
   transmit "AT^M~~AT&W0^M"
   initstring="ATZ^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=38400


Modem "Zoom V.32 Turbo"
      transmit "AT^M~~AT&F^M~~~"
      transmit "AT&C1&D2&K3S7=60S11=55S95=43^M~"
      set baudrate 38400
      transmit "AT^M~~AT&W0^M"
      initstring="ATZ^M"
      mnp=1
      no_connect 3="NO DIALTONE"
      no_connect 4="NO ANSWER"
      baudrate=38400


Modem "Zoom VP/VX 14400 (no fax) Modem"
      transmit "AT^M~~AT&F^M~~~"
      transmit "AT&C1&D2&K3W2S95=43^M~~"
      set baudrate 57600
      transmit "AT^M~~AT&W0^M"
      initstring="ATZ^M"
      mnp=1
      no_connect 3="NO DIALTONE"
      no_connect 4="NO ANSWER"
      baudrate=57600


Modem "Zoom VFP/VFX 14400 Fax Modem"
      transmit "AT^M~~AT&F^M~~~"
      transmit "AT&C1&D2&K3W2S95=43^M~~"
      set baudrate 57600
      transmit "AT^M~~AT&W0^M"
      initstring="ATZ^M"
      mnp=1
      no_connect 3="NO DIALTONE"
      no_connect 4="NO ANSWER"
      baudrate=57600


Modem "Zyxel U-1496 Series"
   transmit "AT^M~~AT&F^M~~~"
   transmit "AT&D2~&R0~&T5~S11=60^M~~"
   set baudrate 57600
   transmit "AT^M~~AT&W1^M"
   initstring="ATZ1^M"
   mnp=1
   no_connect 3="NO DIALTONE"
   no_connect 4="NO ANSWER"
   baudrate=57600