CardWare Readme
DOS Installation of CardWare
Release 1.13B
November 15, 1993

This release of CardWare contains the following files:

        DOSCARD.EXE     CardWare DOS configuration/display program
	PCCARD.EXE 	PC Card Control for DOS and Windows
	PCCS.EXE 	PCMCIA Card Services 2.01 compliant interface
	PCDISK.EXE 	Microsoft flash file system compatible disk interface
	PCENABLE.EXE 	Automatic PC Card enabler
	PCPREP.EXE 	SRAM, flash and PC Card ATA drive preparation utility
	PCSS.EXE 	PCMCIA Socket Services 2.01 compliant interface
        SSTPP163.EXE    PCMCIA Socket Services for Toshiba TPP163
        SSPCIC.EXE      PCMCIA Socket Services for Intel PCIC
        SSPHIC.EXE      PCMCIA Socket Services for Intel PHIC
        SS82086.SYS     PCMCIA Socket Services for DataBook DB82086
        SSTACT.EXE      PCMCIA Socket Services for Texas Instruments TACT88412
        PCRM.EXE        Utility to initialize Card Services resources table
        PCDIRTY.EXE     Utility for card initialization of bad CIS cards
        CARDINFO.TXT    Information about setting up various cards
	CARDWARE.INI 	CardWare configuration file
	CWINI.TXT 	Description of CARDWARE.INI
	README.TXT 	This file


The DOS Install utility copies these files to a directory on your system.
By default, the directory is C:\CARDWARE.  At your option, Install modifies
your system files (CONFIG.SYS and AUTOEXEC.BAT) to include the necessary
entries to support PC Cards. 

Features that are implemented in the Installation Program:
-Appropriate files are copied based on the selected platform.
-Checks for minimum requirements for DOS version, CPU, 
 system memory and disk space.
-EMM386, QEMM, and 386MAX memory exclusion ranges updated in CONFIG.SYS 
 if necessary
-Device drivers are updated in CONFIG.SYS if necessary
-Path to the CardWare directory is added to AUTOEXEC.BAT if necessary
-Direct modification of CARDWARE.INI memory addresses and IRQ lines 
 based on user input
-Automatically detects COM port resources in CARDWARE.INI and removes
 resources if they do not exist
-Ability to remove COM port resources in CARDWARE.INI
 based on user input
-De-install to remove all changes put in by CardWare
-Additional platforms will be supported in the future

Release 1.13B

-Updated files for CardWare 1.50A.  New files are:  CARDINFO.TXT, PCRM.EXE,
 PCDIRTY.EXE, SSTPP163.EXE, SSPCIC.EXE, SSPHIC.EXE, SSTACT.EXE, and SS82086.SYS.

The new release of CardWare differs from Release 1.10B in the following
respects:

-Added PCRM driver to CONFIG.SYS
-Increased the number of supported platforms 
-Allow user to remove COM ports from CardWare resources
