AdapterId	060C2H

AdapterName "Boca Research Dual Async/Parallel Adapter"

NumBytes 3

NamedItem

	Prompt "Serial Connector 1"

	choice "SERIAL_1"   pos[0]=X0XXXXXXb    pos[1]=00011111b    io 03f8h-03ffh  int 4
	choice "SERIAL_2"   pos[0]=X0XXXXXXb    pos[1]=00001111b    io 02f8h-02ffh  int 4
	choice "SERIAL_3"   pos[0]=X0XXXXXXb    pos[1]=01100000b    io 3220h-3227h  int 4
	choice "SERIAL_4"   pos[0]=X0XXXXXXb    pos[1]=01100001b    io 3228h-322fh  int 4
	choice "SERIAL_5"   pos[0]=X0XXXXXXb    pos[1]=10000000b    io 4220h-4227h  int 4
	choice "SERIAL_6"   pos[0]=X0XXXXXXb    pos[1]=10000001b    io 4228h-422fh  int 4
	choice "SERIAL_7"   pos[0]=X0XXXXXXb    pos[1]=10100000b    io 5220h-5227h  int 4
	choice "SERIAL_8"   pos[0]=X0XXXXXXb    pos[1]=10100001b    io 5228h-522fh  int 4
	choice "DISABLED"   pos[0]=X1XXXXXXb

Help
"This asynchronous serial port may be configured at any one of 8 base I/O
addresses, or it may be disabled.  This serial port, when enabled,
generates interrupts on IRQ 3 (serial secondary).  Ports may not use the
same I/O addresses.  Conflicts are indicated by an asterisk."


NamedItem

	Prompt "Serial Connector 2"

	choice "SERIAL_1"   pos[0]=0XXXXXXXb    pos[2]=00011111b    io 03f8h-03ffh  int 3
	choice "SERIAL_2"   pos[0]=0XXXXXXXb    pos[2]=00001111b    io 02f8h-02ffh  int 3
	choice "SERIAL_3"   pos[0]=0XXXXXXXb    pos[2]=01100000b    io 3220h-3227h  int 3
	choice "SERIAL_4"   pos[0]=0XXXXXXXb    pos[2]=01100001b    io 3228h-322fh  int 3
	choice "SERIAL_5"   pos[0]=0XXXXXXXb    pos[2]=10000000b    io 4220h-4227h  int 3
	choice "SERIAL_6"   pos[0]=0XXXXXXXb    pos[2]=10000001b    io 4228h-422fh  int 3
	choice "SERIAL_7"   pos[0]=0XXXXXXXb    pos[2]=10100000b    io 5220h-5227h  int 3
	choice "SERIAL_8"   pos[0]=0XXXXXXXb    pos[2]=10100001b    io 5228h-522fh  int 3
	choice "DISABLED"   pos[0]=1XXXXXXXb

Help
"This asynchronous serial port may be configured at any one of 8 base I/O
addresses, or it may be disabled.  This serial port, when enabled,
generates interrupts on IRQ 3 (serial secondary).  Ports may not use the
same I/O addresses.  Conflicts are indicated by an asterisk."


NamedItem

	Prompt "Parallel Connector"

	choice "PARALLEL_1" pos[0]=XX01101Xb    io 03bch-03bfh  int 7
	choice "PARALLEL_2" pos[0]=XX01010Xb    io 0378h-037bh  int 7
	choice "PARALLEL_3" pos[0]=XX00010Xb    io 0278h-027bh  int 7
	choice "DISABLED"   pos[0]=XX1XXXXXb

Help
"This is a standard Centronics printer interface (unidirectional) which
may be configured at any of the three standard base port addresses.  You
should configure this card numerically as the next parallel card in the
system.  (ie. If the system board is PARALLEL_1, and this is the second
parallel port in the system, then choose the PARALLEL_2 option)."