Ahead VGA Enhancer
@8002.adf
@8202.adf
Ahead VGA Enancer Z Manual
Ahead VGA Enhancer Z Utilities
Ahead VGA Enhancer Z
W5 Function
ADF Sections (both ADFs use same sections)
Ahead VGA
Enhancer Z
J1 Outline for 5 pin jumper
U8-13 Video memory
U14 Socket for?
U16 Socket for?
U19 Video controller
U20 BIOS |
U22 Outline for osc
U27 MHz osc
U32 Outline for osc
W1, 2, 3, 4 Outline for 2 pin jumper
W5 Jumper to set card ID
W6 Outline for three pin jumper |
David Beem put the drivers and scanned the manual for us all.
Function of W5
Sets adapter ID in case there is a conflict. When W5 is jumpered,
card ID is 8002. When W5 is open, card ID is 8202.
Slot Requirement
The VGA Enhancer must be installed in the video extension
slot, since it uses the base video from the planar.
50/50z - Slot #3
60/80 - Slot #6
55sx/70 - Slot #1
AdapterId
08002h and 08202h AHEAD SYSTEMS INC., VGA ENHANCER-Z, Rev. A
VGA Enhancer-Z Disable
<"DISABLE">,
ENABLE
Video BIOS ROM Address Select
The EPROM size can be either 8K (2764) or 16K (27128)
or disabled.
<"BIOS size=
16K starting @C000h"> 0C0000h-0C3fffh, DISABLE BIOS,"BIOS
size= 8K starting @C000h" 0C0000h-0C1fffh
9595 Main Page
|