Artist XJS Lite MC (5090)
Also called Artist 1000 MC
@80C5.adf Artist 1000 MC (5090)
xjsdisk1.zip ARTIST XJS Drivers Version
1.12 (5/93) Disk 1
xjsdisk2.zip ARTIST XJS Drivers Version
1.12 (5/93) Disk 2
ADF Sections
Artist Winsprint (5090)
JP1 Video Out
JP2 Jumper for?
JP3 Jumper for?
R2 Bourns 3323 Potentiometer or
BCD?
U1 TI TMS34020GBL-32
U6 32.000000 MHz Osc |
U7 Artist 1-GA 105J
U28-U35 TI TMS44C251-1SD
U36 72 pin SIMM socket
U42 108.000 MHz Osc
U43 TI TLC34075-110FN
U46-U53 TI TMS44C251-1SD |
AdapterId
080C5H ARTIST 1000 MC Series Version 1.1
PC I/O Address
<03EXh & 07EXh>,
02CXh & 06CXh, 02DXh & 06DXh, 02EXh & 06EXh
PC Memory Address - Below 1MB
The default PC memory address is 0xCC00. This 16 Kbyte
block in PC memory maps into two 8 Kbyte windows in the GPX memory
space. These 8 Kbyte windows can each be mapped to start at any 8
Kbyte boundary in the GPX memory space. By using the system configuration
utility
to configure memory usage the user is assured of a non-conflicting
selection. If the PC memory address is configured as disabled the
software you are using with the ARTIST 1000 MC Series graphic controller
will use the default.
<CC00-CFFF>,
C800-CBFF, D000-D3FF, D400-D7FF, D800-DBFF, DC00-DFFF, Disabled
Data Bus Sizing
The 1000 MC Series can operate in a 16 bit or a 32 bit
Micro Channel card slot.
<32 Bits>,
16 Bits
Interrupt Level
The 1000 MC Series can use Interrupt 5, 7,
10, 11 or interrupts may be disabled
<Disabled>,
IRQ 5, IRQ 7, IRQ 10, IRQ 11
PC Memory Address - Above 1MB
A PC memory address above 1MB should only
be used for UNIX systems. The default is that decoding above 1MB is disabled
<Disabled>,
2MB - 4MB, 4 - 6, 6 - 8, 8 - 10, 10 - 12, 12 - 14, 14 - 16
9595 Main Page
|