System Configuration Utility
Enter SCU
Menu Options
Startup
Disks
Components
Power
Exit
Enter SCU
During boot, right after "Autodetecting IDE Devices" the SCU
prompt will come up for maybe 5-10 seconds (you snooze, you loose). The
exact prompt is "<CTRL+ALT+S> to enter
System
Configuration Utility."
Menu Options
Startup Disks Components Power Exit
Startup
Date and Time
Boot Device
A or C
Cache System
Disable, L1 Enabled (not a choice in BIOS 1.25), Write Thru
Color Scheme
Default, Alternate, Monochrome, Inverse Mono
Disks
_Internal FDC
Yes / No
Diskette Drive
None, 1.44MB, 2.88MB
IDE Settings
Multiple Sector Mode Yes / No
_Boot Sector
Change Possible boot sector write protection?
Components
Com Ports
ComA (DB9 Port)
None, Com1 (3F8-IRQ4), Com2 (2F8, IRQ3)
ComB (DB9 on Cradle)
None, Com1 (3F8-IRQ4), Com2 (2F8, IRQ3)
Com3 (internal
modem) IRQ 4 or IRQ 11
Com4 (wireless
modem) IRQ 3 or IRQ 10
LPT Port (Standard, PS/2,
EPP, ECP)
Port Address
None, 378h/IRQ7, 378h/IRQ5, 278h/IRQ5, 3BCh/IRQ7
Port
Definition for 3BCh Standard AT (Centronics), Bidirectional
(PS-2)
Port
Definition for 378h or 278h Standard AT (Centronics), Bidirectional
(PS-2)
Enhanced Parallel (EPP), Extended Capabilities Parallel (ECP)
EPP/ECP
Version v 1.7 or v 1.9 (available for 378 / 278 addresses only)
_Keyboard Numlock
Keyboard Repeat Repeat
Rate (typematic), Key Delay
ISA Expansion Huh?
External slots?
Power
Enable Power Sharing Yes
/ No (If No, the Standby and Suspend Options are unavailable)
Standby Control Disk
Timeout (Disabled to 5min), Backlight Timeout (Disabled to 15min)
Com1 Timeout (Disabled to 15min), CPU
Doze Throttle (Enable/Disable)
Suspend/Resume Control Suspend Timeout
(Never - 30min)
Low Gas Guage
Warning (0-25%)
Suspend on Low
Battery (Yes/No)
Suspend on AC
Power (Yes/No) Allow automatic suspending while on external
power.
Resume on RTC
Alarm (Yes/No)
Resume Hour (0-23)
Resume
Minute (0-59)
Resume on Radio
Modem (Yes/No) Com1 ring always causes resume.The internal
modem
cannot because it
is powered off or suspended)
Exit
Exit (No Save)
Save and Reboot
Default Settings
Factory Settings
Version Info
9595 Main Page
|