Interrups

Categories

Contents

• S/DOS 1.0+ & PTS-DOS 6.51+ - GET OEM REVISION

• S3 SpeedUp v3.00+
  • GET ACTIVE OPTIONS
  • INSTALLATION CHECK
  • S3 SpeedUp v3.00+ - SET ACTIVE OPTIONS

• S3 SpeedUp v3.10+
  • GET FLAGS
  • S3 SpeedUp v3.10+ - RESERVED FUNCTIONS

• S3RMDRV.SYS
  • COPY ??? INTO USER BUFFER
  • S3RMDRV.SYS - INSTALLATION CHECK / VERSION CHECK

• S3VBE/Core2.0 v3.00+
  • GET ACTIVE OPTIONS
  • INSTALLATION CHECK
  • S3VBE/Core2.0 v3.00+ - SET ACTIVE OPTIONS

• S3VBE/Core2.0 v3.10+
  • ACTIVATE SPEED-UP
  • DEACTIVATE SPEED-UP
  • S3VBE/Core2.0 v3.10+ - GET VBE/Core CAPABILITIES

• Sangoma CCIP (CCPOP 3270 resident module) INTERFACE
• Sangoma CCPOP 3270 resident module
• Sangoma CCPOP 3270 resident module
• Sangoma X.25 INTERFACE PROGRAM

• Sanyo MBC-550/555
  • IRQ0 - 100 HZ INTERRUPT
  • IRQ1 - ???
  • IRQ2 - SERIAL PORT USART INTERRUPT
  • IRQ3 - KEYBOARD USART RECEIVE INTERRUPT
  • IRQ4 - PRINTER READY INTERRUPT
  • IRQ5 - FLOPPY DISK CONTROLLER
  • IRQ6 - 8087 COPROCESSOR INTERRUPT
  • Sanyo MBC-550/555 - IRQ7 - USER INTERRUPT FOR EXTERNAL INTERRUPT

• SB Live! Sound Blaster 16 Emulation Driver - INSTALLATION CHECK

• SBOS v3.82
  • GET ???
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • SET INTERRUPT FOR ???
  • SBOS v3.82 - UNINSTALL

• SBS WinRun 1.00 - TRANSMITTER ENTRY POINT

• SBSIM
  • GETADDRESS - GET SELECTED DRIVER'S ENTRY POINT
  • GETBUFFERINFO - GET DRIVER'S BUFFER ADDRESS
  • GETSNDSTAT - GET DRIVER'S STATUS
  • GETVOLUME - GET SOURCE'S VOLUME
  • PAUSESND - TEMPORARILY PAUSE PLAYBACK ON SELECTED DRIVER
  • PLAYSND - PLAY MUSIC/VOICE ON SELECTED DRIVER
  • QUERYDRIVERS - CHECK DRIVERS INSTALLED
  • QUERYVERSION - GET VERSION
  • RESUMESND - RESTART PLAYBACK ON SELECTED DRIVER
  • SETVOLUME - SET SOURCE'S VOLUME
  • STARTSND - START SOUND ON SPECIFIED DRIVER
  • SBSIM - STOPSND - STOP MUSIC/VOICE ON SELECTED DRIVER

• ScanBoot - INSTALLATION CHECK

• SCOUT v5.4
  • GET ???
  • SCOUT v5.4 - INSTALLATION CHECK

• Screen Thief v1.00
  • FREE HIGH MEMORY BUFFERS
  • RELOCATED IRQ0
  • RELOCATED IRQ1
  • RELOCATED IRQ2
  • RELOCATED IRQ3
  • RELOCATED IRQ4
  • RELOCATED IRQ5
  • RELOCATED IRQ6
  • Screen Thief v1.00 - RELOCATED IRQ7

• SCRNSAV2.COM - INSTALLATION CHECK
• SCROLLit v1.7 - INSTALLATION CHECK

• SCROLOCK.COM
  • ENABLE/DISABLE
  • SCROLOCK.COM - INSTALLATION CHECK

• SCSILink
  • CONNECT TO TARGET
  • GET ADDRESS
  • GET DATA
  • GET ERROR STRING
  • POLL REQUEST
  • PUT DATA
  • RESET SCSI BUS
  • SEND COMMAND
  • SET TIMEOUT
  • SCSILink - TERMINATE SESSION

• SD.COM v6.2

• Seagate
  • ???
  • ??? - PARK HEADS
  • ??? - RETURN IDENTIFICATION
  • Seagate - PARK HEADS???

• Seagate ST01/ST01 - Set Device Type Qualifier (DTQ)

• Seagate ST01/ST02
  • Inquiry
  • PARK HEADS
  • RESERVED
  • RESERVED FUNCTIONS
  • RETURN IDENTIFICATION
  • Seagate ST01/ST02 - SCSI Bus Parity

• SecureDevice
  • DESTROY PASSWORD (LOGOUT FROM DRIVE)
  • GET INFORMATION
  • INSTALLATION CHECK
  • SecureDevice - LOGIN TO DRIVE

• SecureDrive - INSTALLATION CHECK

• SERIAL
  • Digiboard DigiCHANNEL PC/X* Extender INT 14 (XAPCM232.SYS)
  • EXTENDED COMMUNICATION PORT CONTROL (CONVERTIBLE,PS)
  • EXTENDED INITIALIZE (CONVERTIBLE,PS)
  • GET PORT STATUS
  • INITIALIZE PORT
  • READ CHARACTER FROM PORT
  • SERIAL - WRITE CHARACTER TO PORT

• SETDRVER.COM - RESERVED FOR FUTURE USE

• SETDRVER.COM v2.10+
  • DISABLE TSR
  • ENABLE TSR
  • GET ORIGINAL DOS VERSION INFO
  • GET SETDRVER VERSION
  • GET TaskMAX STATUS AT INSTALLATION
  • GET TSR STATUS
  • INSTALLATION CHECK
  • SETDRVER.COM v2.10+ - RESET INTERNAL VARIABLES

• SETWPR.COM
  • INSTALLATION CHECK
  • SETWPR.COM - SET WRITE-PROTECTION STATE

• SFS v1.00
  • DRIVER CONTROL
  • SFS v1.00 - GET CONFIGURATION INFORMATION

• Shamrock Software EMAIL
  • CHECK FOR USER FUNCTION COMMAND-WORD
  • GET CURRENT COMMUNICATIONS PARAMETERS
  • GET ELAPSED ONLINE TIME AND MAXIMUM TIME
  • GET STATUS
  • MONITOR XMODEM DOWNLOAD
  • SEND RESULT OF USER FUNCTION
  • Shamrock Software EMAIL - SPECIFY COMMAND-WORD FOR USER FUNCTION

• Shamrock Software NET.24 v3.11+
  • ENABLE/DISABLE API FUNCTIONS
  • END CHARACTER-ORIENTED TRANSMIT
  • GET STATUS AND TRANSMISSION BUFFER
  • PREPARE CHARACTER-ORIENTED RECEIVE
  • PREPARE CHARACTER-ORIENTED TRANSMIT
  • RECEIVE BLOCK, NO HANDSHAKE
  • RECEIVE BLOCK, WITH HANDSHAKE
  • RECEIVE CHARACTER FROM REMOTE
  • SEND ACK BLOCK
  • SEND NAK BLOCK
  • TRANSMIT BLOCK, NO HANDSHAKE
  • TRANSMIT COMMAND, WITH HANDSHAKE
  • Shamrock Software NET.24 v3.11+ - TRANSMIT SINGLE CHARACTER TO REMOTE

• SHARE - INSTALLATION CHECK

• Show Partner F/X v3.6
  • START PRESENTATION
  • Show Partner F/X v3.6 - UNINSTALL

• ShowGFX - INSTALLATION CHECK

• SilverNET
  • GET RUNTIME PARAMETER
  • SilverNET - SET RUNTIME PARAMETERS

• SilverNET v2+ - INSTALLATION CHECK

• SitBack v3.02R
  • ???
  • ???
  • ???
  • ???
  • CLEAR ??? FLAG
  • GET ???
  • GET DTA
  • GET RESIDENT DATA SEGMENT
  • INSTALLATION CHECK
  • SET ??? FLAG
  • SET ??? FLAG AND GET ??? ADDRESS
  • SitBack v3.02R - TOGGLE ???

• SK-UPPS Data Link Interface API
  • CHANGE DRIVER ADDRESS
  • CLIENT HOOK
  • CLIENT UNHOOK
  • DISABLE MULTICAST
  • DISABLE PROTOCOL
  • DLI 2.5+ - GET DRIVER INFO
  • DLI 2.6+ - GET MEDIA STATISTICS
  • DLI 2.8+ - DRIVER I/O CONTROL
  • DLI 2.8+ - INTERRUPT REQUEST
  • DOWN DRIVER
  • FEED BACK BUFFER
  • GET DRIVER STATISTICS
  • GET DRIVER STATUS
  • GET DRIVER VERSION
  • GET MULTICAST LIST
  • GET PROTOCOL LIST
  • GET PROTOCOL STATUS
  • REGISTER MULTICAST
  • REGISTER PROTOCOL
  • RELEASE BUFFER
  • REQUEST BUFFER
  • SYNC REQUEST BUFFER
  • TRANSMIT FRAME
  • SK-UPPS Data Link Interface API - TRANSMIT FRAME RELEASE

• SK-UPPS/SK-PASSPORT Data Link Interface (DLI) API
• SKUDO - INSTALLATION CHECK
• Smart Prompt - INSTALLATION CHECK

• SMARTDRV v4.00+
  • CHECK IF DRIVE CACHEABLE
  • FLUSH BUFFERS (COMMIT CACHE)
  • GET CACHE SIZE
  • GET DEVICE DRIVER FOR DRIVE
  • GET DOUBLE-BUFFER STATUS
  • GET ELEMENT STATUS TABLE
  • INSTALLATION CHECK AND HIT RATIOS
  • RESET CACHE
  • SIGNAL SERIOUS ERROR
  • SMARTDRV v4.00+ - STATUS

• SMARTDRV v4.20+ - GET/SET FLUSH BEFORE PROMPT, CD-ROM SUPPORT

• SMARTDRV.SYS v3.x only
  • IOCTL - CACHE CONTROL
  • SMARTDRV.SYS v3.x only - IOCTL - GET CACHE STATUS

• Smooth Mouse Driver, PrecisePoint
  • DISABLE SMOOTH MOUSE
  • ENABLE SMOOTH MOUSE
  • GET INFORMATION
  • INSTALLATION CHECK
  • RESERVED FUTURE EXPANSION
  • Smooth Mouse Driver, PrecisePoint - RESERVED FUTURE EXPANSION

• SNAP.EXE 3.2+
  • SNAP_802_5 - ???
  • SNAP_ALLOC - ALLOCATE BUFFER IN SNAP DATA SEGMENT
  • SNAP_BEGINCONV - BEGIN CONVERSATION
  • SNAP_CHKINSTALL - INSTALLATION CHECK
  • SNAP_CLIENTVERSION - ???
  • SNAP_COPYFROM - COPY DATA FROM RESIDENT SNAP PACKAGE
  • SNAP_COPYTO - COPY DATA TO RESIDENT SNAP PACKAGE
  • SNAP_DATASEG - GET RESIDENT DATA SEGMENT
  • SNAP_ENDCONV - END CONVERSATION
  • SNAP_FREE - DEALLOCATE BUFFER IN SNAP DATA SEGMENT
  • SNAP_GETANCHOR
  • SNAP_NOP - ???
  • SNAP_SENDNOREPLY - SEND MSG, DON'T AWAIT REPLY
  • SNAP_SENDWITHREPLY - SEND MSG AND GET REPLY
  • SNAP_SETANCHOR
  • SNAP_SETCONVPARMS - SET CONVERSATION PARAMETERS
  • SNAP_SETDEBUG - SET ???
  • SNAP.EXE 3.2+ - SNAP_VERSION - GET VERSION

• SNAP.EXE 3.4
  • ???
  • SNAP.EXE 3.4 - ???

• SND
  • INSTALLATION CHECK???
  • PAUSE
  • PLAY MUSIC STRING IN BACKGROUND
  • START SOUND
  • STOP SOUND
  • SND - UNCONDITIONALLY STOP SOUND

• Soft-ICE
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - DISPLAY STRING IN Soft-ICE WINDOW
  • BACK DOOR COMMANDS - EXECUTE Soft-ICE COMMAND
  • BACK DOOR COMMANDS - GET BREAKPOINT INFORMATION
  • Soft-ICE - BACK DOOR COMMANDS - GET Soft-ICE VERSION

• Soft-ICE v2.5x
  • BACK DOOR COMMANDS - REMOVE Soft-ICE BREAKPOINT
  • Soft-ICE v2.5x - BACK DOOR COMMANDS - SET Soft-ICE BREAKPOINT

• Soft-ICE v2.80
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • BACK DOOR COMMANDS - ???
  • Soft-ICE v2.80 - BACK DOOR COMMANDS - POPUP & START A DEBUG SESSION

• SoftLogic Data Guardian - ???

• Software Carousel
  • BOOT THE SYSTEM
  • CHANGE PARTITION NAME
  • CHANGE PARTITION SIZE
  • ENABLE DOS-CALL SAFETY NOTIFICATION
  • GET MEMORY SIZE/PARTITION NUMBER OF CURRENT TASK
  • GET PARTITION NAME
  • GET PARTITION SIZE AND PROGRAM STATUS
  • INSTALLATION CHECK
  • KILL PROGRAM IN MEMORY PARTITION
  • SELECTIVELY ENABLE/DISABLE MENU AND SWITCHING
  • SEND COMMAND TO MEMORY SECTION
  • SET TASK SWITCH CALLBACK
  • Software Carousel - SWITCH TO ANOTHER TASK

• SOLLEX SuperVGA
  • ADAPTER CONTROL - DETERMINE ADAPTER SUPPORT
  • ADAPTER CONTROL - GET ADAPTER
  • ADAPTER CONTROL - SET ADAPTER
  • DISPLAY OUTPUT CONTROL - GET DISPLAY OUTPUT
  • DISPLAY OUTPUT CONTROL - SET DISPLAY OUTPUT
  • FILL VIDEO RAM
  • GET EXTENSIONS INFO
  • LOAD REGISTER
  • MULTIPLE FONT CONTROL
  • POWER CONTROL - GET POWER STATE
  • POWER CONTROL - GET TIMEOUT RESET
  • POWER CONTROL - SET POWER STATE
  • POWER CONTROL - SET TIMEOUT RESET
  • VIDEO SUPPORT CONTROL - GET SUPPORT INFO
  • VIDEO SUPPORT CONTROL - GO RAM RESIDENT
  • SOLLEX SuperVGA - VIDEO SUPPORT CONTROL - INITIALIZE VIDEO SUPPORT

• SoundBlaster - POINTER TO ECHO VALUE

• SoundBlaster SBFM driver
  • GET VERSION
  • PAUSE MUSIC
  • PLAY MUSIC
  • RESET DRIVER
  • RESUME MUSIC
  • SET DRIVER CLOCK RATE
  • SET INSTRUMENT TABLE
  • SET MUSIC STATUS BYTE ADDRESS
  • SET SYSTEM CLOCK RATE
  • SET USER-DEF TRAP FOR SYSTEM-EXCLUSIVE CMDS
  • STOP MUSIC
  • SoundBlaster SBFM driver - TRANSPOSE MUSIC

• SoundBlaster speech driver - INSTALLATION CHECK

• SpaceManager
  • ???
  • ???
  • CHECK WHETHER PROGRAM ENABLED
  • DISABLE PROGRAM
  • ENABLE PROGRAM
  • FORTUNE.EXE - NOP
  • GET PER-DRIVE ENABLEMENT TABLE
  • INSTALLATION CHECK
  • INSTALLATION VERIFICATION
  • SELECTC - ???
  • SpaceManager - SELECTC - ???

• SPEECH.COM - CONVERT TEXT STRING TO SPEECH
• SPEEDSCR.COM - INSTALLATION CHECK
• SpeedSTAR Plus BIOS v4.23+ - SET SYNC PARAMETERS

• Sperry PC
  • GET REAL-TIME CLOCK DATE
  • Sperry PC - SET REAL-TIME CLOCK DATE

• SPHINX C-- - WB.COM - API

• SQL Base
  • DATABASE ENGINE API
  • SQL Base - GET VERSION NUMBER

• SRDISK v1.30+ - INSTALLATION CHECK
• SRDISK v2.02 - GET CODE/DATA SEGMENT

• SRSoft MODAL PC v2+
  • ALLOCATE COMMON MEMORY
  • GET A COMMON VARIABLE OR SEMAPHORE
  • GET ALL COMMON VARIABLES AND SEMAPHORES
  • GET PROCESS RUN PARAMETER
  • INSTALLATION CHECK / GET VERSION
  • SET A COMMON VARIABLE OR SEMAPHORE
  • SET ALL COMMON VARIABLES AND SEMAPHORES
  • SRSoft MODAL PC v2+ - SET PROCESS EXIT CODE

• Stac STACKER - INSTALLATION CHECK

• Stacker
  • GET DEVICE DRIVER ADDRESS
  • GET DEVICE DRIVER ADDRESS AND SET VOLUME NUMBER
  • Stacker - GET STACVOL FILE SECTORS

• Stacker 4 LZS Compression Interface (LZSAPI)

• StackMan
  • INSTALLATION BROADCAST
  • REQUEST NEW STACK
  • StackMan - RESTORE ORIGINAL STACK

• STARLITE architecture
  • BIND TO NETWORK DEVICE
  • DETACH FROM NETWORK DEVICE
  • KERNEL API
  • MAKE NAMED OBJECT AVAILABLE ON NETWORK
  • MAP LOCAL DRIVE LETTER TO REMOTE FILE SYSTEM
  • REMOVE GLOBAL NETWORK NAME OF OBJECT
  • STARLITE architecture - UNMAP DRIVE LETTER

• STB RAPIDMAP.SYS - ???
• StopPrg v2.0 - INSTALLATION CHECK
• STRETCH - INSTALLATION CHECK

• STSC APL*PLUS/PC
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • MAY BE USED IN FUTURE RELEASES
  • STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES

• STSC APL*PLUS/PC v9.0 - PLACE KEYSTROKE EVENTS IN INPUT BUFFER
• StuffIt v3.21+ - INSTALLATION CHECK
• Sun PC-NFS - API???

• Super PC-Kwik 5.1
  • ???
  • ???
  • Super PC-Kwik 5.1 - EXITCODE RETRIEVAL NOTIFICATION

• Super PC-Kwik v3.20+
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • FLUSH CACHE
  • GET RESIDENT CODE SEGMENT
  • Super PC-Kwik v3.20+ - INSTALLATION CHECK

• Super PC-Kwik v4+
  • ???
  • ???
  • ???
  • Super PC-Kwik v4+ - ???

• Super PC-Kwik v4.00+
  • ???
  • ???
  • Super PC-Kwik v4.00+ - ???

• Super PC-Kwik v5.10+
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • DISABLE CACHE
  • ENABLE CACHE
  • PROGRAM LOAD NOTIFICATION
  • Super PC-Kwik v5.10+ - PROGRAM TERMINATION NOTIFICATION

• Super-TCP DOS TSR Kernel v3.57
  • ???
  • ???
  • ALLOCATE ???
  • FREE/CLOSE ???
  • FREE/CLOSE ALL ???
  • GET ??? DATA AREA
  • INSTALLATION CHECK
  • Super-TCP DOS TSR Kernel v3.57 - UNINSTALL

• SUPERSTOR - IOCTL - INSTALL CHECK

• SuperStor PRO 2XON.COM
  • INSTALLATION CHECK
  • SuperStor PRO 2XON.COM - UNINSTALL

• SWBIOS
  • GET EXTENDED CYLINDER COUNT
  • INSTALLATION CHECK
  • SWBIOS - SET 1024-CYLINDER FLAG

• SWELL.EXE
  • ACTIVATE
  • GET INFO
  • INSTALLATION CHECK
  • SUSPEND
  • SUSPEND ONCE
  • TURN OFF BORLAND SUPPORT
  • TURN OFF VERBOSE MODE
  • TURN ON BORLAND SUPPORT
  • TURN ON VERBOSE MODE
  • UNINSTALL
  • SWELL.EXE - UNUSED

• Switch-It v3.23
  • ???
  • ???
  • ???
  • CLEAR ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ??? PROGRAM
  • GET CONFIGURATION FILE
  • GET MEMORY ADDRESSES???
  • INSTALLATION CHECK
  • NOP
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • SET ??? FLAG
  • Switch-It v3.23 - SET ??? FLAG

• SyQuest
  • DOOR LATCH/DOOR BUTTON DETECT
  • Generic SCSI pass through
  • READ DRIVE PARAMATERS (for DOS 5+)
  • SyQuest - START/STOP SCSI DISK

• SYSTEM
  • (DE)ACTIVATE INTERNAL MODEM POWER (CONVERTIBLE)
  • BOOTSTRAP LOADER
  • BUILD ABIOS INITIALIZATION TABLE (PS)
  • BUILD ABIOS SYSTEM PARAMETER TABLE (PS)
  • COPY EXTENDED MEMORY
  • ENABLE/DISABLE PROCESSOR FUNCTIONS
  • ENABLE/DISABLE WATCHDOG TIMEOUT (PS50+)
  • FORMAT UNIT PERIODIC INTERRUPT (PS ESDI drives only)
  • GET CONFIGURATION (XT >1986/1/10,AT mdl 3x9,CONV,XT286,PS)
  • GET EXTENDED MEMORY SIZE (286+)
  • later PS/2s - DISABLE A20 GATE
  • later PS/2s - ENABLE A20 GATE
  • later PS/2s - EXPANSION UNIT, RETURN CONFIGURATION NUMBER
  • later PS/2s - GET A20 GATE STATUS
  • later PS/2s - LOCATE ROM BASIC
  • later PS/2s - QUERY A20 GATE SUPPORT
  • later PS/2s - RETURN MEMORY-MAP INFORMATION
  • POINTING DEVICE BIOS INTERFACE (PS) - ENABLE/DISABLE
  • POINTING DEVICE BIOS INTERFACE (PS) - EXTENDED COMMANDS
  • POINTING DEVICE BIOS INTERFACE (PS) - GET TYPE
  • POINTING DEVICE BIOS INTERFACE (PS) - INITIALIZE
  • POINTING DEVICE BIOS INTERFACE (PS) - RESET
  • POINTING DEVICE BIOS INTERFACE (PS) - SET DEVICE HANDLER ADDR
  • POINTING DEVICE BIOS INTERFACE (PS) - SET RESOLUTION
  • POINTING DEVICE BIOS INTERFACE (PS) - SET SAMPLING RATE
  • POINTING DEVICE BIOS INTERFACE - READ FROM POINTER PORT
  • POINTING DEVICE BIOS INTERFACE - WRITE TO POINTER PORT
  • POWER-ON SELF-TEST ERROR LOG (PS50+)
  • PROGRAMMABLE OPTION SELECT (PS50+)
  • READ SYSTEM STATUS (CONVERTIBLE)
  • READ/MODIFY PROFILES (CONVERTIBLE)
  • REQUEST POWER OFF (CONVERTIBLE,HP 95LX)
  • RETURN EXTENDED-BIOS DATA-AREA SEGMENT ADDRESS (PS)
  • SWITCH TO PROTECTED MODE
  • USER ALARM HANDLER
  • SYSTEM - WAIT ON EXTERNAL EVENT (CONVERTIBLE and some others)

• SYSTEM DATA
  • 8x8 GRAPHICS FONT
  • DISKETTE PARAMETERS
  • HARD DISK 0 PARAMETER TABLE ADDRESS [NOT A VECTOR!]
  • HARD DISK 1 DRIVE PARAMETER TABLE ADDRESS [NOT A VECTOR!]
  • NON-KEYBOARD SCAN-CODE TRANSLATION TABLE (PCjr)
  • SYSTEM DATA - VIDEO PARAMETER TABLES

• SYSTEM FOSSIL
• System resume vector (CONVERTIBLE)

• SYS_PROF.EXE
  • CLEAR PROFILING TABLE
  • GET ADDRESS OF PROFILING TABLE
  • PROFILER STATUS
  • TURN PROFILING OFF
  • SYS_PROF.EXE - TURN PROFILING ON

Interrups

Categories

Contents