|
| Interrups | Categories | Contents |
BL = 00h BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI)
Return:
AX = initialization result (see #03972)
Program: SBSIM is Creative Labs' SoundBlaster Simplified Interface Module, which provides access to multiple drivers for the SoundBlaster board through a single interface
Range:
INT 80h to INT BFh, selected automatically
Note: The SBSIM installation check consists of testing for the signature "SBSIM" at offset 103h in the interrupt handler's segment.
See Also: INT 80/BL=01h"SBSIM" - INT 80/BL=02h"SBSIM" - INT 80/BL=03h"SBSIM"
See Also: INT 80/BX=0000h"SBSIM"
(Table 03972) Values for SBSIM error code: 01h busy--currently in use 02h bad driver specified 03h invalid function 04h voice process already active 05h couldn't start CT-VOICE 06h couldn't start CTVDSK 07h invalid SBSIM handle 08h buffer not initialized yet 09h bad filename 0Ah bad file handle 0Bh driver not started yet 0Ch XMS driver not installed 0Dh no free SBSIM handles 0Eh bad file type 0Fh couldn't free XMS block 10h invalid source selected 11h get pan position failed 12h set pan position failed 13h set volume failed 14h couldn't start fade/pan 15h couldn't stop fade/pan 16h couldn't pause fade/pan 17h not a fade/pan operation 18h bad mode for fade/pan 19h couldn't start fade/pan 1Ah source not fading/panning 1Bh FM or MIDI already playing 1Ch bad MIDI mapper format
Category: Sound/Speech - Int 80h - S
|
| Interrups | Categories | Contents |