Interrups | Categories | Contents |
AX = 1E05h BH = functionbit 7:
=1 set brightness, =0 query brightnessbits 6-0:
Reserved (0). ---if BH bit 7 set---. BL = new brightness setting (see #00058)
Return:
AL = 1Eh if function supported BH = resultsbit 7:
Query/set (copied from input)bits 6-2:
Reserved (0)bit 1:
Software brightness control is supportedbit 0:
Set operation was successful (always clear on get) BL = active brightness setting (see #00058)
Note: This function operates independently of AX=1E07h
See Also: AX=1E00h - AX=1E04h - AX=1E06h - AX=1E07h
Bitfields for Flat-Panel brightness control: Bit(s) Description (Table 00058) 7-1 reserved (0) 0 high brightness
See Also: #00057 - #00059
Interrups | Categories | Contents |