|
| Interrups | Categories | Contents |
AX = 5307h CX = 0001h BX = 0001h (device ID for all power-managed devices)
Return:
CF clear
Notes: Puts the entire system into stand-by mode; normally called in response to a System Stand-by Request notification after any necessary processing, but may also be invoked at the caller's discretion. Should not be called from within a hardware interrupt handler to avoid reentrance problems. The stand-by state is typically exited on an interrupt
See Also: AX=4280h - AX=5307h/CX=0002h"SUSPEND" - AX=5307h/CX=0003h - AX=530Bh
Category: Power Management - Int 15h - A
|
| Interrups | Categories | Contents |