|
| Interrups | Categories | Contents |
AX = 530Bh
Return:
CF clear if successful BX = event code (see #00479) CX = event information (APM v1.2) if BX=0003h or BX=0004hbit 0:
PCMCIA socket was powered down in suspend state. CF set on error AH = error code (03h,0Bh,80h) (see #00473)
Notes: Although power management events are often asynchronous, notification will not be made until polled via this call to permit software to only receive event notification when it is prepared to process power management events; since these events are not very time- critical, it should be sufficient to poll once or twice per second. The critical resume notification is made after the system resumes from an emergency suspension; normally, the system BIOS only notifies its partner that it wishes to suspend and relies on the partner to actually request the suspension, but no notification is made on an emergency suspension. Should not be called from within a hardware interrupt handler to avoid reentrance problems
See Also: AX=5307h - AX=5307h/CX=0001h"STAND-BY" - AX=5307h/CX=0002h"SUSPEND"
(Table 00479) Values for APM event code: 0001h system stand-by request 0002h system suspend request 0003h normal resume system notification 0004h critical resume system notification 0005h battery low notification ---APM v1.1--- 0006h power status change notification 0007h update time notification 0008h critical system suspend notification 0009h user system standby request notification 000Ah user system suspend request notification 000Bh system standby resume notification ---APM v1.2--- 000Ch capabilities change notification (see AX=5310h) ------ 000Dh-00FFh reserved system events 01xxh reserved device events 02xxh OEM-defined APM events 0300h-FFFFh reserved
Category: Power Management - Int 15h - A
|
| Interrups | Categories | Contents |