|
| Interrups | Categories | Contents |
AH = 80h
Return:
CF clear if successful CX = 5353h ('SS') if Socket Services installed AL = number of adapters present (0-16) AH destroyed CF set on error AH = error code (see #00656)
See Also: AH=83h"PCMCIA"
(Table 00656) Values for PCMCIA error codes: 01h "BAD_ADAPTER" nonexistent adapter 02h "BAD_ATTRIBUTE" invalid attribute specified 03h "BAD_BASE" invalid system memory base address 04h "BAD_EDC" invalid EDC generator specified 05h "BAD_INDICATOR" invalid indicator specified 06h "BAD_IRQ" invalid IRQ channel specified 07h "BAD_OFFSET" invalid PCMCIA card offset specified 08h "BAD_PAGE" invalid page specified 09h "BAD_READ" unable to complete request 0Ah "BAD_SIZE" invalid window size specified 0Bh "BAD_SOCKET" nonexistent socket specified 0Ch "BAD_TECHNOLOGY" unsupported Card Technology for writes 0Dh "BAD_TYPE" unavailable window type specified 0Eh "BAD_VCC" invalid Vcc power level index specified 0Fh "BAD_VPP" invalid Vpp1 or Vpp2 power level index specified 10h "BAD_WAIT" invalid number of wait states specified 11h "BAD_WINDOW" nonexistent window specified 12h "BAD_WRITE" unable to complete request 13h "NO_ADAPTERS" no adapters installed, but Socket Services is present 14h "NO_CARD" no card in socket 15h function not supported 16h invalid mode 17h invalid speed 18h busy
Category: Expansion Bus Bios - Int 1Ah - P
|
| Interrups | Categories | Contents |