|
| Interrups | Categories | Contents |
AX = 4452h ("DR")
CF set
Return:
CF set if not DR DOS
AX = error code (see #01680 at AH=59h/BX=0000h)
CF clear if DR DOS
AX = version code
AH = single-user/multiuser nature (see #01581)
10h single-user
AL = operating system version ID (see #01580)
14h multiuser
AL = operating system version ID (see #01579)
DX modified (refer to note below)
Notes: The DR DOS version is stored in the environment variable VER. Use this function if looking for single-user capabilities, AX=4451h if looking for multiuser; this call should never return multiuser values. In DR DOS 3.41-6.0, DX=AX on return; for Novell DOS 7, DH=AH but DL=00h (reportedly, DH=00h when booting NWDOS7 from installation disks). Novell DOS 7 returns error code 0001h if SETVER x.255 is in effect for the calling program, or SETVER /G x.255 is in effect. Although based on DR DOS, CCI Multiuser DOS 7.xx, IMS Multiuser DOS 7.x, and IMS REAL/32 7.50+ do not support this call. With OpenDOS 7.02 BETA 2 and DR-OpenDOS 7.02+, the install check in most tools has been changed to run with both, AH=10h and AH=14h to support possible future "client side" multiuser releases of DR-DOS which may return 14h instead of 10h. Tools should also strip off the CP/Net bit before checking the kernel version. Often used version checks like >= 1070h are invalid, therefore, hence the AH and AL must be checked seperately.. In DR DOS 3.31-6.0, and DR PalmDOS, DX=AX on return.. For Novell DOS 7 - DR DOS 7.03 the DX value returned by this function is the same as the DX value returned by INT 21/AX=3306h, and represents the DOS revision (bits 7-0, currently always DL=00h) and the version flags (bits 15-8, with bit 12 = DOS in HMA, bit 11 = DOS in ROM) of the "patch_version" field in the PCM_HEADER structure in the IBMDOS.COM file. The version flags, however, are updated at runtime to reflect the actual system status, resulting, for example, in DH=10h for DOS in HMA, and DH=0 when booting Novell DOS 7 from installation disks.. The operating system version ID represents the BDOS (Basic Disk Operating System) kernel version (of the DRBDOS.SYS aka IBMDOS.COM file), and the two nibbles can actually be read as CP/M version and sub-version, that is DR-DOS 7.03 (version code 1073h) is actually CP/M-86 version 7.3.. Due to lost original patch sources from the backups, Caldera OpenDOS 7.01 merely represented Novell DOS 7 Update 10 with minor changes.. For Caldera DR-OpenDOS 7.02, all the Novell DOS 7 patches up to including Update 15.2 have been re-incorporated into the system from other sources, while the missing patches for IBMBIO.COM were independently re-implemented by Matthias Paul in 07/1997-10/1997.. Novell DOS 7 (since 1993-11-08), OpenDOS 7.01 and OpenDOS 7.02 BETA IBMDOS.COM return error code 0001h if SETVER x.255 is in effect for the calling program, or SETVER /G x.255 is in effect.. Since Caldera DR-OpenDOS 7.02 the SHARE 2.05+ (1998-01-05) driver
uses INT 21/AX=65A2h as an *additional* BDOS version check:
If the "FUCASE char" function is functional on a DR-DOS BDOS kernel 72h+, SHARE assumes it is running on an OpenDOS 7.02 BETA 1 (73h) kernel (or later) even if the BDOS version returned by INT 21/AX=4452h would indicate an earlier issue of the kernel. Some 3rd party drivers (like HPFS_DOS.EXE) were hardwired to detect Novell DOS 7 only, and so the kernel version had to be patched back on such systems to allow such drivers to work properly. The BDOS version and DOS revision are stored in PCM_HEADER of the IBMDOS.COM file, see table XXXX below.. However, this is no longer necessary with the introduction of the DR-DOS 7.02+ IBMDOS.COM (since 1998-01-10) and SETVER 1.01+ (since 1998-01-12) because they allow to fake BDOS versions as well as faking DOS versions. In /X mode, a set sub-version of y = 100..127 will be used as BDOS version instead (64h..7Fh), while the DOS revision will be used to report the DOS sub-version instead. For example, given a DOS revision of 0, SETVER 6.114 would be the proper value to fake Novell DOS 7 (114=72h) on a DR-DOS 7.02+ system, reporting a DOS version of "IBM" 6.00. Sub-versions 128..255 will completely disable this BDOS version check, and report a DOS sub- version of 0..127. This is to work around problems with possibly hostile programs, that try to detect DR-DOS to not run on this OS..Additional version check for 1072h kernels:
At API level, there is no known way to distinguish Novell DOS 7 from OpenDOS 7.01, however, an IBMBIO.COM/IBMDOS.COM file date since 1997 and the existance of an environment variable %OS%=OPENDOS usually indicates an OpenDOS system (but not the other way around; some OpenDOS BETAs still used %OS%=NWDOS!)..Additional version checks for 1073h kernels:
A functional test of INT 21/AX=65A2h (see above for SHARE) can be used to distinguish OpenDOS 7.02 BETA 1 from the later (OpenDOS 7.02 BETA 2+ and) DR-OpenDOS 7.02 and DR-DOS 7.02 releases, which are both the same, except for the name change and minor bug fixes. Testing for the INT 21/AX=6601h/BX=0000h bug can be used to differentiate the original release of DR-DOS 7.02 from later 7.02 updates and DR-DOS 7.03.. The DR DOS version is stored in the environment variable VER.
See Also: AX=4412h - AX=4451h - AX=4459h
(Table 01580) Values for Digital Research operating system version ID: 41h DOS Plus 1.2 60h DOS Plus 2.0 or 2.1 63h DR DOS 3.41 64h DR DOS 3.42 65h DR DOS 5.0 67h DR DOS 6.0 70h PalmDOS 71h DR DOS 6.0 March 1993 "business update" 72h Novell DOS 7.0 73h OpenDOS 7.02
See Also: #01579 - #01581 - #04088 - #04023
(Table 04088) Values for Digital Research operating system ID codes (full AX return value): ??41h - DOS Plus 1.2 1060h - DOS Plus 2.0 or 2.1 (1988-03-09???) (this was basically a Concurrent CP/M-86 with built-in DOS emulation developed between 1983-1986) 1060h - DR DOS 3.31 (OEM) (1988-04-27???, 06/1988). - DR DOS 3.32 (OEM) (1988-08-17). - DR DOS 3.33 (OEM) (1988-09-01). - DR DOS 3.34 (OEM). - DR DOS 3.35 (OEM) (1988-10-21)
for example:
At least an issue for "Prism System 232" (10/1988) and a French issue existed. 106?h - DR DOS 3.40 BETA 1 (1988-11-11). - DR DOS 3.40 (This is the first issue for sure known to be ROMmable, although DR DOS should have been ROMmable right from the start (1987).) 1063h - DR DOS 3.41 various OEM and retail releases (06/1989-07/1989). - DR DOS 3.41T 1064h - DR DOS 3.42 (It is not clear, if this issue was actually released, since Lineo recently (fall 1999) released some historical kernels, and one of them is sailing under the name DR DOS 5.0 "Leopard" BETA 1 and has copyright strings from 1990, while it still identifies itself as being DR DOS 3.41... Unfortunately the uploaded archive is broken, hence it is not possible to find out easily. Maybe DR DOS 3.42 was nothing more than this early "Leopard" BETA???) 1065h - DR DOS ??? (1990-02-01). - DR DOS 5.0 "Leopard" BETA 2 (1990-03-16),. - DR DOS 5.0 "Leopard" BETA 2B (This was the first issue to use the new IBMBIO.COM/IBMDOS.COM names instead of DRBIOS.SYS/DRBDOS.SYS.). - DR DOS 5.0 "Leopard" BETA 3 (This issue still uses separate boot sectors for floppies and harddisks. The boot sector OEM label is still "DIGITAL".). - DR DOS 5.0 release (06/1990, 08/1990) (This issue has a combined boot sector for both, floppies and harddisks. The boot sector OEM label has changed to "IBM 3.3". DR DOS 5.0 was the first DOS to introduce high-load capabilities.) 1066h - DR DOS ??? (1990-08-09). - DR DOS 6.0 "Buxton" ALPHA (02/1991-03/1991) 1067h - DR DOS ??? (1991-03-15) 106?h - DR DOS 6.0 "Buxton" BETA 2 (??/1991) 106?h - DR DOS 6.0 "Buxton" BETA 3 (05/1991, 1991-06-27, 1991-06-28) 1067h - DR DOS 6.0 release (05/1991, 08/1991).- DR DOS 6.0 BDOS patch "PAT304" English (1991-11-29, XDIR /C:
9D8Ch) fix for "\\" in cmdline by Quick Basic 4.5/MS PDS 7.1 on Lantastic 4.0.- DR DOS 6.0 BDOS patch "PAT303" English (1991-12-03, XDIR /C:
66B0h) This patch makes INT 21/AH=4Eh (Search First) compatible with MS-DOS when the Volume Label attribute is set. Previously under DR DOS the volume label was only searched for if bit 3 was the only bit set in the attribute whereas MS-DOS searches for the volume label if bit 3 is set, irrespective of any other bits in the attribute..- DR DOS 6.0 BDOS patch "PAT306" English (1991-12-11, XDIR /C:
8DE5h) This patch fixes a problem with OPTASM which would give error 8 if there were not enough handles available. This patch forces the system to check for available handles before it opens a file..- DR DOS 6.0 BDOS patch "PAT312" English (1992-01-07, XDIR /C:
A0C6h) This patch fixes a problem with INT 21/AH=26h (create PSP) the segment from which the PSP was copied was incorrect so the the PSP was not filled correctly and did not contain the command tail..- DR DOS 6.0 BDOS patch "PAT314" English (1992-01-10, XDIR /C:
C964h) This patch modifies INT 21/AX=33xxh, the Ctrl Break handler to support undocumented MS-DOS function INT 21/AX=3302h..- DR DOS 6.0 BIOS patch "PAT315" English (1992-01-10, XDIR /C:
DBAAh) This patch fixes a problem where, when booting from a Bernoulli drive, any DEVICE= statement in CONFIG.SYS failed if it was placed after the device driver RCD.SYS v7.x and DOSOAD.SYS v1.x.- DR DOS 6.0 BDOS patch "PAT317" English (1992-01-27, XDIR /C:
B701h) This patch fixes a problem where attempting to close a changed file on a write protected disk seems to work after the first retry. This was caused because when the retry is attempted the file has been marked as not changed, so the attempt to write to disk is not made..- DR DOS 6.0 BDOS patch "PAT321" English (1992-02-19, XDIR /C:
947Bh) This patch fixes a problem where the error codes returned from INT 25h and INT 26h for "drive not ready" and "write protect" errors were incorrect..- DR DOS 6.0 BDOS patch "PAT323" English (1992-02-20, XDIR /C:
E1B0h) This patch fixes a problem where, if the first command entered after booting the machine is a single character, any use of the command line recall keys will only recall the first command.. - DR DOS 6.0 ??? German (1992-02-21). - DR DOS 6.0 update (02/1992).- DR DOS 6.0 BDOS patch "PAT326" English (1992-03-05, XDIR /C:
8EF2h) This is an optional patch to prevent DRDOS from padding the environment of EXEPACKed applications or utilities.. - DR DOS 6.0 ??? German (1992-03-27).- DR DOS 6.0 BDOS patch "PAT334" English (1992-03-27, XDIR /C:
2AFEh) This patch fixes a problem where selecting (R)etry after hitting ^P while the printer is offline caused the system to hang.. - DR DOS 6.0 "Windows 3.1 update, April 1992" "dr6win" (03/1992, 1992-04-07). This public update only includes patches addressing full Windows 3.1 compatiblity. There should have been a full "business update" for registered users, shipping a little bit later.. - DR DOS 6.0 ??? English (1992-04-07).- DR DOS 6.0 BDOS patch "pat354" English (1992-07-28, XDIR /C:
3398h)This patch for Beame and Whiteside Networks:
On opening a duplicate file handle which describes a device, a device open call is made to inform the device driver that a new file handle has been opened. This patch is current and up to date as of 1992-11-10.. - DR DOS 6.0 update (07/1992).- DR DOS 6.0 BDOS patch "PAT301" English (1992-10-28, XDIR /C:
959Bh) This patch fixes a problem with apps that opens a file, with Share loaded, but then cannot delete the file until the file is closed. This causes "Money Manager" to fail.. - DR DOS 6.0 update (11/1992).
Note: There is no known method to distinguish these different kernels at runtime, except for - maybe - checksumming the IBMBIO.COM/ IBMDOS.COM files. The listed patches only address a single problem, while the listed updates are full rebuilds, also including all previous fixes. 1070h - multitasking "Vladivar" kernel architecture and introduction of DOS-like structures (1991-07-26, 08/1991). - DR DOS ??? (1991-09-26). - DR PalmDOS "Merlin" BETA 1-2. - DR PalmDOS "Merlin" BETA 3 (1992-06-23). - DR PalmDOS "Merlin" Evaluation Release (1992-08-25). - DR PalmDOS Release Candidates 1-2 (1992-08-26). - DR PalmDOS/NetWare PalmDOS 1.0 (06/1992-11/1992) (DR PalmDOS was the first DR DOS re-incarnation that supported a genuine CDS, but still pretended to be DOS 3.31. Much of the former CP/M stuff was stripped out to reduce the code size to meet early Palmtop PC requirements. It introduced the patented dynamic idle detection method (by Roger Gross), a special issue of the TASKMAX program switcher (MINIMAX) to support Personal Information Modules (PIM) plug-in executables, supported Flash/ROM disk, XIP "Execute in Place" applications, and came with PCMCIA Card Services and Service Stack (SS) partially written by Ian Cullimore (ex-Poquet Computer Corporation founder).. - DR DOS "Panther" BETA 1 (1992-10-16) (This issue already supported DPMS, had the "Vladivar" pre-emptive multitasker, DPMS-SuperStor disk compression, Multiuser-security (World/Group/Owner), and much improved multi-windowing ViewMAX/3 GUI which looked alot more like Windows than GEM. It pretended to be PC DOS 5. However, this issue was never released and later partially merged into the Novell DOS 7 project (without Multiuser-security and ViewMAX/3). In 1999, Caldera Thin Clients released ViewMAX/3 under GPL, see http://www.gemworld.com.) 1070h??? - DR DOS "StarTrek" (STDOS) (07/1992-05/1993) (A never released, though reportedly fully functional result of a Novell and Apple team-up utilizing the DR DOS "Vladivar" multi- tasker to run Apple's Intel-port of MacOS 7.1 on an issue of DR DOS "Panther", even emulating HFS and Mac resources on DOS FAT file- systems.) 1071h - DR DOS ??? (1992-11-26). - DR DOS 6.0 "business update" "DRDOS493" English for Windows for Workgroups 3.1 (1993-03-19). - DR DOS 6.0 patch "PATDR6" English (1993-03-19) for NetWare. - DR DOS 6.0 patch "PAT394" English (1993-09-17). - Apparently also some issues of DR DOS "Panther"??? 1072h - Novell DOS 7/PNW "Smirnoff" BETA 1 (??/1993, probably 1993-04-26). - Novell DOS 7 "Panther" BETA 2 (08/1993) (This "Panther" issue is much different from the early 10/1992 "Panther" BETA 1.). - Novell DOS 7 "Panther/Smirnoff" BETA 2 (08/1993). - Novell DOS 7 "Panther/Smirnoff" BETA 3 (09/1993) (This issue does not have workarounds for Windows 3.1 "AARD" code). - Novell DOS 7 "Panther/Smirnoff" BETA 4 (10/1993). - Novell DOS 7 code freeze 1993-12-03???). - Novell DOS 7 release (12/1993-04/1994) (also known as NWDOS or ND7, sometimes erroneously called NDOS). - Novell DOS 7 German release (1994-02-22) (This issue is known to have workarounds for Windows 3.1 "AARD" code). - Novell DOS 7 updates 1-3 (???/1994). - Novell DOS 7 update 4 (1994-05-31). - Novell DOS 7 updates 5-9 (???/1994). - Novell DOS 7 update 10 (12/1994). - Novell DOS 7 update 11 (01/1995). - Novell DOS 7 update 12 (04/1995). - Novell DOS 7 update 13 (05/1995). - Novell DOS 7 update 14 (08-09/1995). - Novell DOS 7 update 15 (12/1995). - Novell DOS 7 update 15.2 (01/1996)
Note: The Novell DOS 7 updates 4-15.2 are full rebuilds, not patched binaries.. - Caldera OpenDOS 7.01 BETA (02/1997) (basically representing Novell DOS 7 update 10 with minor changes here and there). - Caldera OpenDOS 7.01 (02-03/1997). - Caldera OpenDOS 7.01 M.R.S. (05/1997) (release of the kernel source code). - Matthias Paul's enhanced OpenDOS 7.02 ALPHA 1-4 kernels (07-11/1997) 1073h - Caldera OpenDOS 7.02 BETA 1 (09/1997) (incorporating most the Novell DOS 7 update 15.2 changes, except for IBMBIO.COM changes, plus a few other enhancements). - Caldera OpenDOS 7.02 BETA 2 (11/1997) (now also incorporating Matthias Paul's ALPHA 4 enhancements, the Novell DOS update 15.2 IBMBIO.COM patches have been re-implemented). - Caldera OpenDOS 7.02 BETA 2A (12/1997) (now incorporating all Novell DOS 7 update 15.2 changes). - Caldera DR-OpenDOS 7.02 (1997-12-2x) (now for the first time the product name is written with a hyphen!!!). - Caldera DR-DOS 7.02 internal build (02/1998). - Caldera DR-DOS 7.02 release (03/1998). - Caldera DR-DOS 7.02A release (06/1998). - DR-DOS 7.02 Update 1 (08/1998). - DR-DOS 7.02 Update 2 (09/1998). - Caldera (Thin Clients) DR-DOS 7.03 BETA (1998-12-03), sometimes referred to as "DR-DOS 7.03 BETA 3". - Caldera (Thin Clients) DR-DOS 7.03 release (1998-12-24, 1999-01-06). - Lineo DR-DOS 7.03 release (1999-06-07, 1999-09-09) (this issue has no functional changes compared to the 1999-01-06 issue of DR-DOS 7.03)
See Also: #01580 - #01579 - #01581 - #04023
Bitfields for CP/M type indicator: Bit(s) Description (Table 01581) 7-4 CPU type. 0000 = 8080. 0001 = 8086 3-0 OS type. 0000 = CP/M. 0001 = MP/M. 0002 = CP/Net. 0004 = multiuser
Notes: Usually 10h (single-user) or 14h (multi-user).. While earlier releases of the system utilities performed a test for a version code of (>)= (10)xxh, this was changed with DR-OpenDOS 7.02+ (now taking a possible multi-user version into
account):
Most utilities now test for AH being either 10h or 14h, and a BDOS version >=xxh to allow them to properly run on possible future multi-user releases of DR-DOS. Before doing this test, some of them strip off the CP/Net bit.
See Also: #01580
Category: Other Operating Systems - Int 21h - D
|
| Interrups | Categories | Contents |