Int 21/AH=E3h/SF=D7h

Novell NetWare - FILE SERVER - GET DRIVE MAPPING TABLE

AH = E3h subfn D7h
DS:SI -> request buffer (see #02033)
ES:DI -> reply buffer (see #02034)

Return:
AL = status (00h,C6h) (see #02025)

Notes: This function is supported by Advanced NetWare 2.1+. The calling workstation must have console operator privileges

See Also: AH=E3h/SF=C8h - AH=E3h/SF=D6h - AH=E3h/SF=D9h -

See Also: AX=F217h/SF=D7h


Format of NetWare "Get Drive Mapping Table" request buffer:

Offset  Size    Description     (Table 02033)
00h    WORD    0001h (length of following data)
02h    BYTE    D7h (subfunction "Get Drive Mapping Table")

See Also: #02034 - #02230 at AX=F217h/SF=D7h


Format of NetWare "Get Drive Mapping Table" reply buffer:

Offset  Size    Description     (Table 02034)
00h    WORD    (call) 00ECh (length of following results buffer)
02h    DWORD   (big-endian) clock tick elapsed since system started
06h    BYTE    fault tolerance (SFT) level
07h    BYTE    number of logical drives attached to server
08h    BYTE    number of physical drives attached to server
09h  5 BYTEs   disk channel types (00h none, 01h XT, 02h AT, 03h SCSI,
04h disk coprocessor drive, 32h-FFh value-added drive types)
0Eh    WORD    (big-endian) number of outstanding controller commands
10h 32 BYTEs   drive mapping table (FFh = no such drive)
30h 32 BYTEs   drive mirror table (secondary physical drive, FFh = none)
50h 32 BYTEs   dead mirror table (last drive mapped to, FFh if never mirrored)
70h    BYTE    physical drive being remirrored (FFh = none)
71h    BYTE    reserved
72h    DWORD   (big-endian) remirrored block
76h 60 BYTEs   SFT error table (internal error counters)

See Also: #02033 - #02230 at AX=F217h/SF=D7h

Category: Netware - Int 21h - N

Interrups Categories Contents