|
| Interrups | Categories | Contents |
AX = 0000h CX = number of descriptors to allocate
Return:
CF clear if successful AX = base selector CF set on error AX = error code (DPMI 1.0+) (see #03143)
Notes: DPMI is the DOS Protected-Mode Interface. The base and limit of the returned descriptors will be 0, and the type will be "data". Add the value returned by INT 31/AX=0003h to move to subsequent descriptors if multiple descriptors were allocated. Not supported by MS Windows 3.0 in Standard mode
See Also: AX=0001h - AX=000Dh - INT 21/AX=3501h
(Table 03143) Values for DPMI 1.0 error code: 0000h-7FFFh DOS error passed through by DPMI 8001h unsupported function 8002h object in wrong state for function 8003h system integrity would be endangered 8004h deadlock detected 8005h pending serialization request cancelled 8010h out of DPMI internal resources 8011h descriptor unavailable 8012h linear memory unavailable 8013h physical memory unavailable 8014h backing store unavailable 8015h callback unavailable 8016h handle unavailable 8017h maximum lock count exceeded 8018h shared memory already serialized exclusively by another 8019h shared memory already serialized shared by another client 8021h invalid value for numeric or flag parameter 8022h invalid segment selector 8023h invalid handle 8024h invalid callback 8025h invalid linear address 8026h request not supported by hardware
Category: DOS Extenders - Int 31h - D
|
| Interrups | Categories | Contents |