|
| Interrups | Categories | Contents |
AH = 10h AL = connection ID (Novell TELAPI.EXE) CX = ??? ES:BX -> buffer for status (see #03730)
Return:
CF clear if successful CL = ??? CH = ??? CF set on error ???
Notes: This function is also supported by TelAPI. When shelled out to an external protocol from Novell NASI, the circuit whose status indicates that it is connected is the currently active circuit
See Also: AX=0700h - AH=12h - AH=1Fh
Format of NASI status: Offset Size Description (Table 03730) 00h BYTE number of allocated virtual circuits 01h BYTE reserved 02h 9 BYTEs states of emulated circuits 0-8 00h idle 01h attached Telnet session, in command state 02h attached Telnet session, connected with host 03h-06h ??? (not returned by TelAPI)
Note: This description is derived from the Novell TelAPI emulation of NASI
Category: Serial I/O - Int 6Bh - N
|
| Interrups | Categories | Contents |