|
| Interrups | Categories | Contents |
AH = 0Ah BP = 005Ah (driver ID for V_STRACK) BH = width of save area in bytes BL = hot-spot X coordinate CH = height in scan lines CL = hot-spot Y coordinate ES:SI -> sprite mask (screen mask followed by XOR sprite mask)
Return:
AH = status (see #03744) BP,DS destroyed
Note: The save area is one byte wider than the actual sprite mask; the total size of the sprite is at most 144 bytes
See Also: AH=00h"HP Vectra" - AH=04h"F_TRACK_INIT" - AH=08h"F_TRACK_OFF"
See Also: AH=0Ch"F_SET_LIMITS_X" - AH=10h"F_PUT_SPRITE" - AH=12h"F_REMOVE_SPRITE"
Category: Vendor-specific BIOS Extensions - Int 6Fh - H
|
| Interrups | Categories | Contents |