Interrups

Categories

Contents

• Halo88 - API

• HARD DISK
  • CHECK IF DRIVE READY
  • CONTROLLER INTERNAL DIAGNOSTIC
  • CONTROLLER RAM DIAGNOSTIC (XT,PS)
  • DRIVE DIAGNOSTIC (XT,PS)
  • INITIALIZE CONTROLLER WITH DRIVE PARAMETERS (AT,PS)
  • PS/1 and newer PS/2 - IDENTIFY DRIVE
  • PS/1 and newer PS/2 - READ MULTIPLE DISK SECTORS
  • PS/1 and newer PS/2 - SET CONTROLLER FEATURES REGISTER
  • PS/1 and newer PS/2 - SET MULTIPLE MODE
  • PS/1 and newer PS/2 - WRITE MULTIPLE DISK SECTORS
  • READ LONG SECTOR(S) (AT and later)
  • READ SECTOR BUFFER (XT only)
  • RECALIBRATE DRIVE
  • RESET HARD DISKS
  • SEEK TO CYLINDER
  • WRITE LONG SECTOR(S) (AT and later)
  • HARD DISK - WRITE SECTOR BUFFER (XT only)

• HDILOAD Mach32 Adapter Interface - UNINSTALL

• Headroom
  • ???
  • Headroom - API

• HEART.COM - INSTALLATION CHECK
• Helix Multimedia Cloaking - CACHECLK - INSTALLATION CHECK
• Helix Netroom RM386 v6.00 - XMS EXTENSIONS
• HelpTSR v2.10 - INSTALLATION CHECK
• Hewlett Packard - HP MOUSE DRIVER INSTALLATION CHECK
• HiFont - INSTALLATION CHECK
• HIGHUMM.SYS v1.17+ - IOCTL - GET API ADDRESS
• HIMEM.SYS - Mach 20 SUPPORT

• HIMEM.SYS v2.77+
  • GET A20 HANDLER NUMBER
  • HIMEM.SYS v2.77+ - GET EXTERNAL A20 HANDLER ADDRESS

• HIMEM.SYS v3.09+ - GET XMS HANDLE TABLE
• HLLAPI (IBM 3270 High-Level Language API)/LLAPI (Rabbit Low Level API)

• HP 100LX
  • MAP HIGH MEMORY
  • HP 100LX - SAVE/RESTORE MEMORY MAP

• HP 100LX/200LX
  • ADJUST SYSTEM TIME
  • GET BACKUP BATTERY LEVEL
  • GET MAIN BATTERY LEVEL
  • GET POWER INFO
  • GET/SET DISPLAY CONTRAST
  • PCMCIA - ???
  • PUSHKEYS - INSTALLATION CHECK
  • PUSHKEYS - INSTALLATION CHECK
  • PUSHKEYS - INTERNAL - GET BUFFER ADDRESS
  • PUSHKEYS - INTERNAL - UNINSTALL
  • SERIAL INTERFACE CONTROL
  • SERIAL INTERFACE SELECT
  • SET ANNOUNCIATORS POSITION
  • SET BATTERY CHARGING MODE
  • SET BUZZER VOLUME
  • SET DISPLAY CONTRAST
  • SET DISPLAY CONTROL STATUS
  • SET MAIN BATTERY TYPE
  • HP 100LX/200LX - SET POWER OFF TIMEOUT

• HP 100LX/200LX GRAPHICS PRIMITIVES
  • GET FONT POINTER
  • HP 100LX/200LX GRAPHICS PRIMITIVES - SET CURRENT FONT

• HP 200LX - KEY200 - INSTALLATION CHECK

• HP 95LX
  • ENABLE/DISABLE LIGHT SLEEP
  • EXTERNAL CARD INTERRUPT
  • INFRARED INTERRUPT
  • LOW-LEVEL KEYBOARD HANDLER
  • REAL-TIME CLOCK
  • SLEEP/WAKEUP
  • HP 95LX - USED BY CALCULATOR

• HP 95LX System Manager
  • ALLOCATE LARGE MEMORY BLOCK
  • ALLOCATE REGULAR MEMORY BLOCK
  • BEEP
  • CHECK FOR EVENT
  • CLEAR PORTION OF SCREEN
  • CLIPBOARD SERVICE M_FINI_REP
  • CLIPBOARD SERVICE M_REP_INDEX
  • CLIPBOARD SERVICE M_REP_NAME
  • CLOCK/CALENDAR SERVCE M_GET_SETTINGS_ADDR
  • CLOCK/CALENDAR SERVICE M_ALARM
  • CLOCK/CALENDAR SERVICE M_DAY_TRIGGER
  • CLOCK/CALENDAR SERVICE M_DTINFO
  • CLOCK/CALENDAR SERVICE M_GETDTM
  • CLOCK/CALENDAR SERVICE M_GET_SETTINGS
  • CLOCK/CALENDAR SERVICE M_GET_SW
  • CLOCK/CALENDAR SERVICE M_GET_TIMER
  • CLOCK/CALENDAR SERVICE M_POST_TIME
  • CLOCK/CALENDAR SERVICE M_SETDTM
  • CLOCK/CALENDAR SERVICE M_SET_SETTINGS
  • CLOCK/CALENDAR SERVICE M_START_SW
  • CLOCK/CALENDAR SERVICE M_START_TIMER
  • CLOCK/CALENDAR SERVICE M_STOP_SW
  • CLOCK/CALENDAR SERVICE M_STOP_TIMER
  • CLOCK/CALENDAR SERVICE M_TELL_ANYTIME
  • CLOCK/CALENDAR SERVICE M_XALARM
  • CLOSE CLIPBOARD
  • CLOSE COMMUNICATIONS CHANNEL
  • CLOSE FILE
  • CLOSE PRINTER
  • COMMUNICATIONS SERVICE M_COMM_INIT
  • CP_TO_LICS
  • CREATE NEW FILE
  • CREATE OR TRUNCATE FILE
  • DELETE FILE
  • DISABLE MACROS
  • DISPLAY HELP
  • DISPLAY OR REDISPLAY EDIT FIELD
  • DISPLAY OR REDISPLAY MENU
  • DISPLAY STRING
  • DISPLAY THREE-LINE MESSAGE BOX
  • DISPLAY TWO-LINE MESSAGE BOX
  • DISPLAY/REDISPLAY FILE SELECTION MENU
  • DRAW STANDARD TITLE BOX
  • EDIT ON TOP LINE
  • EDIT_INIT
  • ENABLE MACROS
  • FILE SERVICE M_COMMON_OPEN
  • FILE SERVICE M_COPYDT
  • FILE SERVICE M_FDATE
  • FILE SERVICE M_GETDIR
  • FILE SERVICE M_GETFDT
  • FILE SERVICE M_GET_SYSDIR
  • FILE SERVICE M_MATCH
  • FILE SERVICE M_PUTFDT
  • FILE SERVICE M_SETDIR
  • FILE SERVICE M_SETPAT
  • FILE SERVICE M_VOLUME
  • FLUSH KEYBOARD BUFFER
  • FREE LARGE MEMORY BLOCK
  • FREE REGULAR MEMORY BLOCK
  • GET COMMUNICATIONS SETTINGS
  • GET DEFAULT DRIVE
  • GET FILE ATTRIBUTES
  • GET FILE POSITION
  • GET SCREEN (VIDEO???) MODE
  • GET_RESOURCE_PTR
  • GET_RSRC_TAB_PTR
  • GrDispClear
  • GrDispCorner
  • GrDispDot
  • GrDispDraw
  • GrDispFill
  • GrDispInit
  • GrDispPan
  • GrDispRead
  • GrDispRestore
  • GrDispSave
  • GrDispString
  • GrDispZoom
  • IDENTIFY FILENAME REFERENT
  • INITIALIZE FILE SELECTION MENU
  • INITIALIZE HELP SYSTEM
  • INITIALIZE PRINTER
  • INIT_SYSMGR_RSRCS
  • LET SYSMGR PROCESS FILE SEL MENU KEYSTROKE
  • LET SYSTEM MANAGER HANDLE MENU KEYSTROKE
  • LET SYSTEM MANAGER PROCESS EDITING KEYSTROK
  • LOAD DS
  • LOTUS 1-2-3 BRIDGE SERVICES
  • MAKE A SOUND PATTERN
  • MAKE A SUBDIRECTORY
  • MDIT_CUTMARK
  • MDIT_DIS
  • MDIT_FIL
  • MDIT_INI
  • MDIT_INS_STR
  • MDIT_KEY
  • MDIT_MARK
  • MDIT_UNMARK
  • MENU_ON - ENABLE PROCESSING OF MENU
  • M_APPCOUNT
  • M_APP_NAME
  • M_BIOS_OUTSTR
  • M_ColCpSearch
  • M_ColCpStr
  • M_ColInit
  • M_ColLicsChar
  • M_ColLicsStr
  • M_ColToLower
  • M_ColToUpper
  • M_COMM_ANSWER
  • M_COMM_BREAK
  • M_COMM_CNFGUR
  • M_COMM_COMAND
  • M_COMM_DIAL
  • M_COMM_FRCXOF
  • M_COMM_FRCXON
  • M_COMM_GETMDM
  • M_COMM_HANGUP
  • M_COMM_HAZCMD
  • M_COMM_QRYERR
  • M_COMM_SETDTR
  • M_COMM_STATUS
  • M_COMM_XMITNG
  • M_COM_TIMER_ADDR
  • M_COM_TIMER_COUNT_ADDR
  • M_DATE_TIME_SEPS
  • M_DIRTY_SYNC - FORCE SCREEN UPDATE
  • M_ERRMSG
  • M_FALL_PRINTER
  • M_FORM_FT
  • M_HELP_KEY
  • M_HELP_TERM
  • M_LOCK - PREVENT TASK SWITCHES
  • M_NEW_REP - START A NEW REPRESENTATION???
  • M_RAM_IV_INFO
  • M_REBOOT
  • M_REG_APP_NAME
  • M_SPAWN
  • M_SPAWNARG
  • M_SYS_RSRC_ADDR
  • M_TELLTIME - DISPLAY TIMESTAMP
  • M_TRANS_PRINTER
  • M_UNLOCK - ALLOW TASK SWITCHES
  • NO_FINI - REFUSE TERMINATION REQUEST
  • OPEN CLIPBOARD
  • OPEN COMMUNICATIONS CHANNEL
  • OPEN FILE
  • OPEN FILE IN READ-ONLY MODE
  • OPEN PRINTER
  • PARSE DATE SPECIFICATION
  • PARSE TIME SPECIFICATION
  • PROCESS INITIALIZING
  • PROCESS TERMINATION
  • QUERY COMM CHANNEL RECEIVE QUEUE
  • QUERY COMM CHANNEL TRANSMIT QUEUE
  • READ FROM CLIPBOARD
  • READ FROM FILE
  • RECEIVE DATA FROM COMM CHANNEL
  • REMOVE A SUBDIRECTORY
  • REMOVE FILE SELECTION MENU
  • REMOVE MENU
  • REMOVE MESSAGE BOX
  • RENAME FILE
  • RESET CLIPBOARD
  • RESET COMMUNICATIONS CHANNEL
  • RESOURCE SERVICE MAP_RESOURCE_FILE
  • SCREEN SERVICE M_CHRATTR
  • SCREEN SERVICE M_CHRINV
  • SCREEN SERVICE M_CHRRVRT
  • SCREEN SERVICE M_ROWS_COLS
  • SCREEN SERVICE M_XCHG
  • SCROLL PORTION OF SCREEN
  • SEND DATA OVER COMM CHANNEL
  • SET COMMUNICATIONS SETTINGS
  • SET CURSOR POSITION
  • SET DATE PARSING RULE
  • SET DEFAULT DRIVE
  • SET FILE ATTRIBUTES
  • SET FILE POSITION
  • SET SCREEN (VIDEO???) MODE
  • SET TIME PARSING RULE
  • SETUP MENU
  • SHOWNAME
  • SH_STATUS
  • SOUND SERVICE M_THUD
  • TURN OFF SOUND
  • WAIT FOR EVENT
  • WRITE TO CLIPBOARD
  • WRITE TO FILE
  • WRITE TO PRINTER
  • HP 95LX System Manager - YIELD CPU

• HP 95LX/100LX/200LX - INSTALLATION CHECK

• HP 95LX/100LX/200LX GRAPHICS PRIMITIVES
  • DRAW LINE
  • DRAW RECTANGLE
  • GET CURRENT GRAPHICS INFO
  • GET IMAGE
  • GET PIXEL
  • MOVE PEN
  • PLOT POINT
  • PUT IMAGE
  • SET CLIP REGION
  • SET FILL MASK
  • SET LINE TYPE
  • SET LOGICAL ORIGIN
  • SET PEN COLOR
  • SET REPLACEMENT RULE
  • SET VIDEO MODE
  • HP 95LX/100LX/200LX GRAPHICS PRIMITIVES - WRITE TEXT

• HP OmniShare
  • Pen Driver - GET PEN BATTERY CHARGE
  • Pen Driver - REPORT PEN CONTROL AREA EVENT
  • Pen Driver - SET THE COMMUNICATION LED STATE
  • Pen Driver - STORE PEN BATTERY CHARGE
  • STANDBY.COM - GET STANDBY DURATION
  • STANDBY.COM - INSTALLATION CHECK
  • STANDBY.COM - IS THE DISPLAY IN STANDBY MODE?
  • STANDBY.COM - PREPARE FOR UNINSTALL
  • STANDBY.COM - RESERVED FUNCTIONS
  • STANDBY.COM - SET STANDBY DURATION
  • STANDBY.COM - TURN OFF THE SCREEN IMMEDIATELY
  • HP OmniShare - STANDBY.COM - TURN ON THE SCREEN IMMEDIATELY

• HP Vectra
  • EXTENDED BIOS - F17_INQUIRE - INSTALLATION CHECK
  • HP Vectra - EXTENDED BIOS - F17_PUT_BUFFER - PRINT BUFFER

• HP Vectra AT
  • IRQ16 - 8041 SERVICE REQUEST
  • IRQ17 - KEYBOARD OUTPUT-BUFFER-FULL SERVICE ROUTINE
  • IRQ18 - RESERVED HARDWARE INTERRUPT
  • IRQ19 - RESERVED HARDWARE INTERRUPT
  • IRQ20 - HP-HIL CONTROLLER INTERRUPT
  • IRQ21 - RESERVED HARDWARE INTERRUPT
  • HP Vectra AT - IRQ22 - RESERVED HARDWARE INTERRUPT

• HP Vectra ES/QS/RS EX-BIOS
  • GET HIL Extended BIOS INTERRUPT NUMBER
  • READ PROCESSOR SPEED
  • SET HIL Extended BIOS INTERRUPT NUMBER
  • SET PROCESSOR SPEED TO HIGH
  • HP Vectra ES/QS/RS EX-BIOS - SET PROCESSOR SPEED TO LOW

• HP Vectra EX-BIOS
  • F14_EXINIT - INITIALIZE SERIAL PORT
  • F14_GET_BUFFER - READ DATA INTO BUFFER
  • F14_INQUIRE - INSTALLATION CHECK
  • F14_PUT_BUFFER - TRANSMIT BUFFER
  • F14_TRM_BUFFER - READ UNTIL TERMINATOR
  • F16_DEF_ATTR - GET DEFAULT TYPEMATIC VALUES
  • F16_DEF_MAPPING - GET DEFAULT KEY MAPPINGS
  • F16_GET_ATTR - GET CURRENT TYPEMATIC VALUES
  • F16_GET_MAPPING - GET CURRENT KEY MAPPINGS
  • F16_INQUIRE - Extended BIOS INSTALLATION CHECK
  • F16_KBD - GET KEYBOARD INFORMATION
  • F16_KBD_RESET - RESET KEYBOARD TO DEFAULTS
  • F16_SET_ATTR - SET TYPEMATIC VALUES
  • F16_SET_MAPPING - SET KEY MAPPINGS
  • F16_SET_XLATORS - SET CCP AND SOFTKEY PADS
  • F_CMOS_GET - READ CMOS MEMORY
  • F_CMOS_RET - WRITE CMOS MEMORY
  • F_DEF_MASKS - DEFINE GRAPHICS CURSOR MASKS
  • F_GET_BLOCK - READ BLOCKS OF DATA FROM DEVICE
  • F_GET_BUFFER - READ A BUFFER OF DATA FROM DEVICE
  • F_GET_BYTE - READ A BYTE OF DATA FROM DEVICE
  • F_GET_WORD - READ WORD OF DATA FROM DEVICE
  • F_INQUIRE - GET DRIVER PHYSICAL DESCRIBE RECORD
  • F_INQUIRE_ALL - GET DRIVER STATUS TABLE
  • F_INQUIRE_ENTRY - GET GID DRIVER ENTRY POINT
  • F_INQUIRE_FIRST - GET PHYSICAL DRIVER VECTOR
  • F_INS_BASEHPVT - GET HP_VECTOR_TABLE ADDRESS
  • F_INS_FIND - FIND DRIVER BY ATTRIBUTES
  • F_INS_FIXGETDS - INSTALL VALUES IN FIXED VECTOR
  • F_INS_FIXGLBDS - INSTALL VALUES IN FIXED VECTOR
  • F_INS_FIXOWNDS - INSTALL VALUES IN FIXED VECTOR
  • F_INS_FREEGETDS - INSTALL VALUES IN FREE VECTOR
  • F_INS_FREEGLBDS - INSTALL VALUES IN FREE VECTOR
  • F_INS_FREEOWNDS - INSTALL VALUES IN FREE VECTOR
  • F_INS_XCHGFIX - EXCH VALUES WITH FIXED VECTOR
  • F_INS_XCHGFREE - EXCH VALUES WITH FREE VECTOR
  • F_INS_XCHGRSVD - EXCH VALUES WITH RESRVED VECTOR
  • F_IO_CTRL SF_CLIPPING_OFF - DISABLE CLIPPING
  • F_IO_CTRL SF_CLIPPING_ON - ENABLE CLIPPING
  • F_IO_CTRL SF_CLR_CRTSW - SET CRT TO MONOCHROME
  • F_IO_CTRL SF_CLR_RAMSW - CLEAR 8041 RAM SWITCH
  • F_IO_CTRL SF_CREATE_EVENT - SET EVENT HANDLER
  • F_IO_CTRL SF_CREATE_INTR - CREATE INTERVAL ENTRY
  • F_IO_CTRL SF_CRV_DISABLE_REPEAT - KEY REPT OFF
  • F_IO_CTRL SF_CRV_RECONFIGURE - RECONFIG LINK
  • F_IO_CTRL SF_CRV_REPEAT - SET KEY REPEAT RATE
  • F_IO_CTRL SF_CRV_REPORT_NAME - GET DEV NAME
  • F_IO_CTRL SF_CRV_REPORT_STATUS - GET DEVSTATUS
  • F_IO_CTRL SF_CRV_SELF_TEST - PERFORM SELFTEST
  • F_IO_CTRL SF_CRV_WR_ACK - ACKNOWLEDGE DEVICE
  • F_IO_CTRL SF_CRV_WR_PROMPTS - WRITE PROMPT
  • F_IO_CTRL SF_DEF_LINKS - SET DEFAULT PARENTS
  • F_IO_CTRL SF_DELET_INTR - DELETE INTERVAL ENTRY
  • F_IO_CTRL SF_DISABLE_HPHIL - MASK HP-HIL INT
  • F_IO_CTRL SF_DISABLE_KBD - MASK 8041 OBF INT
  • F_IO_CTRL SF_DISABLE_SVC - MASK 8041 SVC INT
  • F_IO_CTRL SF_DISBL_INTR - END INTERRUPT SERVICE
  • F_IO_CTRL SF_ENABLE_HPHIL - UNMASK HP-HIL INT
  • F_IO_CTRL SF_ENABLE_KBD - UNMASK 8041 OBF INT
  • F_IO_CTRL SF_ENABLE_SVC - UNMASK 8041 SVC INT
  • F_IO_CTRL SF_ENABL_INTR - START INTERRUPT SRVICE
  • F_IO_CTRL SF_EVENT_OFF - DISABLE EVENT HANDLER
  • F_IO_CTRL SF_EVENT_ON - ENABLE EVENT HANDLER
  • F_IO_CTRL SF_GET_LINKS - GET DRIVER LINK FIELDS
  • F_IO_CTRL SF_KEYBOARD_LED - SET KEYBOARD LEDS
  • F_IO_CTRL SF_KEYBOARD_REPEAT - SET TYPEMATIC
  • F_IO_CTRL SF_LOCK - RESERVE SUB-ADDRESSES
  • F_IO_CTRL SF_MOUSE_COM - FORCE INT 33 INIT
  • F_IO_CTRL SF_MOUSE_COM - INIT INT 33 HANDLER
  • F_IO_CTRL SF_PASS_THRU - SEND DATA BYTE TO 8041
  • F_IO_CTRL SF_SET_CRTSW - SET CRT TO MULTIMODE
  • F_IO_CTRL SF_SET_LINKS - SET DRIVER LINK FIELDS
  • F_IO_CTRL SF_SET_RAMSW - SET RAM SWITCH IN 8041
  • F_IO_CTRL SF_TRACK_OFF - GRAPHICS CURSOR OFF
  • F_IO_CTRL SF_TRACK_ON - GRAPHICS CURSOR ON
  • F_IO_CTRL SF_UNLOCK - RELEASE SUB-ADDRESSES
  • F_IO_CTRL SF_VID_GET_INFO - GET DISPLAY INFO
  • F_IO_CTRL SF_VID_GET_RES - GET VIDMODE RESOLUTN
  • F_IO_CTRL SF_VID_ID_HP - INSTALLATION CHECK
  • F_IO_CTRL SF_VID_MOD_INFO - SET EXT-CTRL REG
  • F_IO_CTRL SF_VID_SET_INFO - SET EXT-CTRL INFO
  • F_IO_CTRL SF_VID_SET_MODE - SET VIDEO MODE
  • F_ISR (internal) - RESPOND TO LOGICAL ISR
  • F_PUT_BLOCK - WRITE BLOCKS TO DEVICE
  • F_PUT_BUFFER - WRITE A BUFFER TO DEVICE
  • F_PUT_BYTE - WRITE A BYTE OF DATA TO DEVICE
  • F_PUT_SPRITE - DISPLAY GRAPHICS CURSOR SPRITE
  • F_PUT_WORD - WRITE A WORD OF DATA
  • F_PUT_WORD - WRITE WORD OF DATA TO DEVICE
  • F_RAM_GET - GET EX-BIOS FREE RAM AREA
  • F_RAM_RET - RESERVE EX-BIOS MEMORY
  • F_REMOVE_SPRITE - REMOVE GRAPHICS CURSOR SPRITE
  • F_SAMPLE - POLL CURRENT ABSOLUTE POSITION
  • F_SET_LIMITS_X - SET HORIZONTAL TRACKING LIMITS
  • F_SET_LIMITS_Y - SET VERTICAL TRACKING LIMITS
  • F_SND_BEEP - SOUND BEEP WITH CURRENT VALUES
  • F_SND_BEEP_DISABLE - DISABLE BEEPS
  • F_SND_BEEP_ENABLE - ENABLE BEEPS
  • F_SND_CLICK - GENERATE KEYCLICK
  • F_SND_CLICK_DISABLE - TURN OFF KEYCLICKS
  • F_SND_CLICK_ENABLE - TURN ON KEYCLICKS
  • F_SND_SET_BEEP - SET BEEP FREQUENCY AND DURATION
  • F_SND_TONE - SOUND TONE WITH FREQ AND DURATION
  • F_STR_DEL_BUCKET - DEL HEADER FROM BUCKET LIST
  • F_STR_GET_FREE_INDEX - FIND FREE STRING INDEX
  • F_STR_GET_INDEX - GET INDEX FOR STRING
  • F_STR_GET_STRING - FIND STRING IN BUCKET LIST
  • F_STR_PUT_BUCKET - ADD HEADER TO BUCKET HDR LIST
  • F_SYSTEM SF_CLOSE - RELEASE DRIVER
  • F_SYSTEM SF_DEF_ATTR - RESET TO DEFAULT ATTR
  • F_SYSTEM SF_GET_ATTR - GET CURRENT ATTRIBUTES
  • F_SYSTEM SF_INIT - START INITIALIZING DRIVER
  • F_SYSTEM SF_INTERVAL - 60 HZ INTERVAL EXPIRED
  • F_SYSTEM SF_OPEN - RESERVE DRIVER FOR ACCESS
  • F_SYSTEM SF_REPORT_STATE - GET DRIVER STATE
  • F_SYSTEM SF_SET_ATTR - SET DEVICE ATTRIBUTES
  • F_SYSTEM SF_START - COMPLETE DRIVER INITIALIZ.
  • F_SYSTEM SF_TEST - PERFORM HARDWARE TEST
  • F_SYSTEM SF_TIMEOUT - REPORT REQUESTED TIMEOUT
  • F_SYSTEM SF_VERSION_DESC - GET DRIVER VERSION
  • F_TRACK_INIT - RESET TRACKING DRIVER TO DEFAULTS
  • F_TRACK_OFF - DISABLE CURSOR TRACKING
  • F_TRACK_ON - ENABLE CURSOR TRACKING
  • F_YIELD - GIVE UP CPU TO OTHER TASKS
  • INSTALLATION CHECK
  • MODIFY MONITOR INFO
  • HP Vectra EX-BIOS - SET MONITOR INFO

• HP Vectras RS/20C and RS/25C
  • DISABLE MEMORY CACHING
  • ENABLE MEMORY CACHING
  • GET MEMORY CACHING STATE
  • HP Vectras RS/20C and RS/25C - SET PROCESSOR SPEED TO MEDIUM

• HugeRealMode Driver
  • GET ENTRY POINT
  • HugeRealMode Driver - INSTALLATION CHECK

• HUNTER 16
  • ACKNOWLEDGE EVENT
  • AUTHORISE CHARGING
  • CONTROL BATTERY CHANGE FACILITIES (APM)
  • CONTROL BREAK KEYS
  • CONTROL CTRL-ALT-DEL
  • CONTROL CTS HANDSHAKING
  • CONTROL EMERGENCY BREAKOUT
  • CONTROL HANDSHAKE LINES
  • CONTROL HOT KEY
  • CONTROL HOT KEY POWER OPTION
  • CONTROL KEY REPEAT
  • CONTROL KEYCLICK
  • CONTROL POWER DOWN AVAILABILITY
  • CONTROL POWER INPUT (SPM)
  • CONTROL POWER OUTPUT
  • CONTROL POWER SAVE
  • CONTROL RESUME MODE
  • CONTROL RI POWER UP
  • CONTROL RS232 DRIVERS
  • CONTROL SCREEN DUMP AREA
  • CONTROL SCREEN SYNCHRONISATION
  • CONTROL SHIFT KEYS
  • CONTROL SLOW MODE
  • CONTROL SOUND
  • CONTROL STOP MODE
  • DRAW ELLIPSE/CIRCLE
  • DRAW LINE/BOX
  • ENABLE/TRAP EVENT
  • EXTENDED CONTROL
  • EXTENDED PROTOCOL MENU
  • EXTENDED STATUS
  • GET BACKLIGHT TIMEOUT
  • GET CURSOR ADDRESS
  • GET CURSOR POSITION IN GRAPHICS CO-ORDINATES
  • GET DISKETTE PORT
  • GET DTR
  • GET EVENT DETAIL
  • GET EXTENDED PROTOCOL PARAMETERS
  • GET GRAPHICS FONT
  • GET IDLE TIMEOUT
  • GET INSTALLED PROTOCOLS COUNT
  • GET KEY REPEAT
  • GET ORACLE GT POWER LEVEL
  • GET POWER LEVEL
  • GET POWER MODE
  • GET POWER UP KEYS
  • GET PROTOCOL HANDLE
  • GET PROTOCOL NAME
  • GET ROM BIOS VERSION
  • GET SERIAL NUMBER
  • GET/SET BATTERY CAPACITY (APM)
  • GET/SET BOOST CHARGE (SPM)
  • GET/SET CHARGER TEMPERATURE OVERRIDE
  • GET/SET POWER SAVE ENTRY FLAG
  • GET/SET SCREEN ATTRIBUTE TABLE
  • INVOKE HOT KEY
  • LOOKING KEYS
  • MOVE CURSOR TO GRAPHICS CO-ORDINATES
  • OVERRIDE LOW POWER TURN OFF
  • READ COMMS PARAMETERS
  • REDEFINE KEY CODES
  • REDEFINE KEY SCAN CODES
  • REDEFINE RAW KEY CODES
  • REDIRECT LPT1
  • REDIRECT SERIAL NUMBER
  • REQUEST POWER DOWN
  • RESET KEYBOARD
  • RESET SERIAL NUMBER
  • RESTORE POWER MENU (APM)
  • SELECT COMMS PARAMETERS
  • SELECT POWER UP KEYS
  • SELECT TEXT FONT
  • SELECT TEXT-MODE INVERSE VIDEO MECHANISM
  • SET BACKLIGHT LEVEL
  • SET BACKLIGHT POWER UP STATE
  • SET BACKLIGHT TIMEOUT
  • SET BATTERY LEVEL
  • SET BATTERY TYPE (APM)
  • SET CONTRAST
  • SET CONTRAST POWER UP STATE
  • SET DISKETTE PORT
  • SET DTR
  • SET GRAPHICS FONT
  • SET IDLE TIMEOUT
  • SET INT 72h VECTOR
  • SET LCD WINDOWS POSITION
  • SET LOW POWER THRESHOLD
  • SET POWER MENU (APM)
  • SET POWER MODE
  • SET SYSTEM CLOCK SPEED
  • SET TEMPORARY SHIFT
  • SET ZOOM
  • SOUND OUTPUT
  • SPLIT DISPLAY
  • HUNTER 16 - TURN BACKLIGHT ON/OFF

• HyperDisk v4.01+
  • ???
  • ???
  • HyperDisk v4.01+ - ???

• HyperDisk v4.50+
  • GET CURRENT CACHE STATE
  • HyperDisk v4.50+ - SET CACHE STATE

• HyperPAD v2.2 - API ACCESS
• HyperWare programs - INSTALLATION CHECK

Interrups

Categories

Contents