|
| Interrups | Categories | Contents |
AX = 6F01h
Return:
AH = 00h (successful) CX = 0004h (size of returned buffer) ES:SI -> buffer for typematic info (see #00596)
Note: Supported by the original HP Vectra AT and ES/QS/RS series HP Vectras
See Also: AX=6F00h - AX=6F02h - AX=6F03h - AX=6F04h
Format of HP Vectra EX-BIOS typematic info: Offset Size Description (Table 00596) 00h BYTE delay before repeat for all non-Cursor Control Pad keys (see #00597) 01h BYTE typematic rate for all non-Cursor Control Pad keys (see #00598) 02h BYTE delay before repeat for Cursor Control Pad keys (see #00599) 03h BYTE typematic rate for Cursor Control Pad keys (see #00598)
(Table 00597) Values for HP Vectra EX-BIOS non-CCP delay time: 00h 17 ms 01h 150 ms 02h 283 ms 03h 417 ms 04h 550 ms 05h 683 ms 06h 817 ms 07h 950 ms 08h 1083 ms 09h 1217 ms 0Ah 1350 ms 0Bh 1483 ms 0Ch 1617 ms 0Dh 1750 ms 0Eh 1883 ms 0Fh 2017 ms
Note: The above values assume that the key repeat rate has been set to 60 Hz; double the times if set to 30 Hz
See Also: #00596 - #00598 - #00599
(Table 00598) Values for HP Vectra EX-BIOS typematic rate: 00h 60 / sec 01h 30 / sec 02h 20 03h 15 04h 12 05h 10 06h 8.57 07h 7.5 08h 6.66 09h 6 / sec 0Ah 5.45 0Bh 5 0Ch 4.62 0Dh 4.28 0Eh 4 / sec 0Fh typematic disabled
Note: The above values assume that the key repeat rate has been set to 60 Hz; halve the rates if set to 30 Hz
See Also: #00597 - #00599
(Table 00599) Values for HP Vectra EX-BIOS CCP delay time: 00h 17 ms 01h 83 ms 02h 150 ms 03h 217 ms 04h 283 ms 05h 350 ms 06h 417 ms 07h 483 ms 08h 550 ms 09h 617 ms 0Ah 683 ms 0Bh 750 ms 0Ch 817 ms 0Dh 883 ms 0Eh 950 ms 0Fh 1017 ms
Note: The above values assume that the key repeat rate has been set to 60 Hz; double the times if set to 30 Hz
See Also: #00597 - #00598
Category: Vendor-specific BIOS Extensions - Int 16h - H
|
| Interrups | Categories | Contents |