Int 14/AH=1Eh

HUNTER 16 - READ COMMS PARAMETERS

AH = 1Eh
CX = channel number (00h COM1, 01h COM2, ...)
DS:BX -> buffer for communications parameters (see #00347)

Return:
DS:BX buffer filled

Note: The Husky Hunter 16 is an 8088-based ruggedized laptop. Other family members are the Husky Hunter, Husky Hunter 16/80, and Husky Hawk.

See Also: AH=20h"HUNTER"


Format of HUNTER 16 communications parameters:

Offset  Size    Description     (Table 00347)
00h    BYTE    communications type (00h IBM, nonzero Husky)
01h    BYTE    port number (00h COM1, 01h COM2)
02h    BYTE    baud rate (00h 110 bps, 01h 150, 02h 300, 03h 600, 04h 1200,
05h 2400, 06h 4800, 07h 9600, 08h 19200, 09h 38400)
03h    BYTE    data bits (01h seven, 02h eight)
04h    BYTE    parity (00h none, 01h odd, 02h even)
05h    BYTE    stop bits (00h one, 01h two)
06h    BYTE    handshake (see #00348)
07h    BYTE    handshake protocol (00h none, 01h Xon/Xoff, 02h HWK3780)
08h    BYTE    Nulls after CR (0-20)
09h    BYTE    LF (00h off, 01h on)
0Ah    BYTE    Serig. 0..7Fh:
Ignore this character
80h:
Serig off
0Bh    BYTE    echo (00h off, 01h on)
0Ch    BYTE    transmit timeout in seconds (1-60) or 00h to disable
0Dh    BYTE    receive timeout in seconds (1-60) or 00h to disable
0Eh  5 BYTEs   reserved

Bitfields for HUNTER 16 handshake:

Bit(s)  Description     (Table 00348)
0-1    0:
RTS off, 1: RTS hold, 2: RTS true
2      DTR enabled
4      CTS enabled
5      DSR enabled
6      DCD enabled

Category: Serial I/O - Int 14h - H

Interrups Categories Contents