int 14

Int 14 - SERIAL - Digiboard DigiCHANNEL PC/X* Extender INT 14 (XAPCM232.SYS)
Int 14/AH=00h - SERIAL - INITIALIZE PORT
Int 14/AH=00h - FOSSIL (Fido/Opus/Seadog Standard Interface Level) - INITIALIZE
Int 14/AH=00h - Tandy 2000 - SERIAL - RESET COMM PORT
Int 14/AH=00h - MBBIOS - INITIALIZE PORT
Int 14/AH=00h/DX=FFFFh - Connection Manager - MODIFY DEFAULT CONNECTION PARAMETERS
Int 14/AH=01h - SERIAL - WRITE CHARACTER TO PORT
Int 14/AH=01h/DX=FFFFh - Connection Manager - SEND CHARACTER
Int 14/AH=02h - SERIAL - READ CHARACTER FROM PORT
Int 14/AH=02h - FOSSIL - RECEIVE CHARACTER WITH WAIT
Int 14/AH=02h/DX=FFFFh - Connection Manager - RECEIVE CHARACTER
Int 14/AH=03h - SERIAL - GET PORT STATUS
Int 14/AH=03h/DX=FFFFh - Connection Manager - RETURN COMMUNICATION PORT STATUS
Int 14/AH=04h - SERIAL - EXTENDED INITIALIZE (CONVERTIBLE,PS)
Int 14/AH=04h - Tandy 2000 - SERIAL - FLUSH COMM BUFFER
Int 14/AH=04h - FOSSIL - INITIALIZE DRIVER
Int 14/AH=04h - MultiDOS Plus IODRV - INITIALIZE PORT
Int 14/AH=04h - Digiboard DigiCHANNEL PC/X* - CHANGE BAUD RATE
Int 14/AH=04h - MBBIOS - INSTALLATION CHECK
Int 14/AH=04h/DX=FFFFh - Connection Manager - OPEN COMMUNICATION
Int 14/AX=0400h - Microsoft Systems Journal TSRCOMM INT14 - INSTALLATION CHECK
Int 14/AX=0401h - Microsoft Systems Journal TSRCOMM INT14 - INITIALIZE MODE
Int 14/AX=0402h - Microsoft Systems Journal TSRCOMM INT14 - EXTENDED INITIALIZE
Int 14/AX=0403h - Microsoft Systems Journal TSRCOMM INT14 - SET TIMEOUT
Int 14/AX=0404h - Microsoft Systems Journal TSRCOMM INT14 - CLEAR THE RECEIVE BUFFER
Int 14/AX=0405h - Microsoft Systems Journal TSRCOMM INT14 - GET RECEIVE BUFFER COUNT
Int 14/AX=0406h - Microsoft Systems Journal TSRCOMM INT14 - CLEAR THE TRANSMIT BUFFER
Int 14/AX=0407h - Microsoft Systems Journal TSRCOMM INT14 - GET TRANSMIT BUFFER COUNT
Int 14/AX=0408h - Microsoft Systems Journal TSRCOMM INT14 - UNINSTALL
Int 14/AH=05h - SERIAL - EXTENDED COMMUNICATION PORT CONTROL (CONVERTIBLE,PS)
Int 14/AH=05h - FOSSIL - DEINITIALIZE DRIVER
Int 14/AH=05h - MultiDOS Plus IODRV - READ CHARACTER FROM PORT
Int 14/AH=05h - Digiboard DigiCHANNEL PC/X* - CHANGE PROTOCOL
Int 14/AH=05h - MBBIOS - DROP DTR AND RTS
Int 14/AH=05h - PC-MOS/386 v5.01 $serial.sys v5.04 - CHANGE PORT PROTOCOL
Int 14/AH=05h - PhysTechSoft PTS ROM-DOS - SET PACKET
Int 14/AH=05h/DX=FFFFh - Connection Manager - CLOSE COMMUNICATION
Int 14/AH=06h - FOSSIL - RAISE/LOWER DTR
Int 14/AH=06h - MultiDOS Plus IODRV - WRITE CHARACTER TO PORT
Int 14/AH=06h - MBBIOS - RAISE DTR AND RTS
Int 14/AH=06h - PC-MOS/386 v5.01 $serial.sys v5.04 - DRIVER 'ID' FUNCTION
Int 14/AH=06h - TelAPI - WRITE BLOCK
Int 14/AH=06h - PhysTechSoft PTS ROM-DOS - GET PACKET
Int 14/AH=06h/DX=FFFFh - Connection Manager - SEND CHARACTER BLOCK
Int 14/AH=07h - FOSSIL - RETURN TIMER TICK PARAMETERS
Int 14/AH=07h - MultiDOS Plus IODRV - GET PORT STATUS
Int 14/AH=07h - MBBIOS - SEND BREAK
Int 14/AH=07h - PC-MOS/386 v5.01 $serial.sys v5.04 - SEND RS-232 BREAK
Int 14/AH=07h - TelAPI - READ BLOCK
Int 14/AH=07h/DX=FFFFh - Connection Manager - RECEIVE CHARACTER BLOCK
Int 14/AH=08h - FOSSIL - FLUSH OUTPUT BUFFER WAITING TILL ALL OUTPUT IS DONE
Int 14/AH=08h - MultiDOS Plus 4.0 IODRV - GET AND RESET PORT LINE STATUS
Int 14/AH=08h - Digiboard DigiCHANNEL PC/X* - ALTERNATE STATUS CHECK
Int 14/AH=08h - MBBIOS - NON-DESTRUCTIVE READ
Int 14/AH=08h - PC-MOS/386 v5.01 $serial.sys v5.04 - INPUT STATUS CHECK
Int 14/AH=08h/DX=FFFFh - Connection Manager - RETURN DEFAULT CONNECTION PARAMETERS
Int 14/AH=09h - FOSSIL - PURGE OUTPUT BUFFER THROWING AWAY ALL PENDING OUTPUT
Int 14/AH=09h - MultiDOS Plus IODRV - RESET PORT STATUS
Int 14/AH=09h - Digiboard DigiCHANNEL PC/X* - CLEAR BUFFERS
Int 14/AH=09h - MBBIOS - GET/SET OPTIONS
Int 14/AH=09h - PC-MOS/386 v5.01 $serial.sys v5.04 - RESET I/O BUFFER POINTERS
Int 14/AH=09h/DX=FFFFh - Connection Manager - SEND BREAK
Int 14/AH=0Ah - FOSSIL - PURGE INPUT BUFFER THROWING AWAY ALL PENDING INPUT
Int 14/AH=0Ah - Digiboard DigiCHANNEL PC/X* - INPUT QUEUE CHECK
Int 14/AH=0Ah - MBBIOS - WRITE BUFFER
Int 14/AH=0Ah/DX=FFFFh - Connection Manager - MODIFY ACTIVE CONNECTION PARAMETERS
Int 14/AH=0Bh - FOSSIL - TRANSMIT NO WAIT
Int 14/AH=0Bh - MBBIOS - READ BUFFER
Int 14/AH=0Bh/DX=FFFFh - Connection Manager - PREPARE FOR INBOUND CONNECTION
Int 14/AH=0Ch - FOSSIL - NON-DESTRUCTIVE READ AHEAD
Int 14/AH=0Ch - MBBIOS PACCOM support - BUFFER MANAGEMENT
Int 14/AH=0Ch/DX=FFFFh - Connection Manager - TEST FOR INBOUND CONNECTION REQUEST
Int 14/AH=0Dh - FOSSIL - KEYBOARD READ WITHOUT WAIT
Int 14/AH=0Dh - Digiboard DigiCHANNEL PC/X* - GET POINTER TO CH_KEY_RDY FLAG
Int 14/AH=0Dh - MBBIOS PACCOM support - SET TXD
Int 14/AH=0Dh/DX=FFFFh - Connection Manager - TERMINATE CONNECTION CLIENT ACTIVITY
Int 14/AX=0D00h - MBBIOS - GET AVAILABLE BYTES
Int 14/AX=0D01h - MBBIOS - LOWER ALL MODEM CONTROL SIGNALS
Int 14/AX=0D02h - MBBIOS - RAISE ALL MODEM CONTROL SIGNALS
Int 14/AX=0D03h - MBBIOS - SET HANDSHAKE BYTE
Int 14/AH=0Eh - FOSSIL - KEYBOARD READ WITH WAIT
Int 14/AH=0Eh - Digiboard DigiCHANNEL PC/X* - WRITE STRING
Int 14/AH=0Eh - MBBIOS PACCOM support - SET PERSISTENCE
Int 14/AH=0Eh/DX=FFFFh - Connection Manager - SET HARDWARE FLOW STATE
Int 14/AH=0Fh - FOSSIL - ENABLE/DISABLE FLOW CONTROL
Int 14/AH=0Fh - Digiboard DigiCHANNEL PC/X* - READ STRING
Int 14/AH=0Fh - MBBIOS PACCOM support - SET SLOT TIME
Int 14/AH=0Fh/DX=FFFFh - Connection Manager - RETURN ACTIVE CONNECTION PARAMETERS
Int 14/AH=10h - FOSSIL - EXTENDED ^C/^K CHECKING AND TRANSMIT ON/OFF
Int 14/AH=10h - Digiboard DigiCHANNEL PC/X* - CLEAR RECEIVE BUFFER
Int 14/AH=10h - MBBIOS PACCOM support - SET CRC WAIT
Int 14/AH=10h/DX=FFFFh - Connection Manager - QUERY SERVICE NAMES
Int 14/AH=11h - FOSSIL - SET CURRENT CURSOR LOCATION
Int 14/AH=11h - Digiboard DigiCHANNEL PC/X* - CLEAR TRANSMIT BUFFER
Int 14/AH=11h - PC-MOS/386 v5.01 $serial.sys v5.04 - DISABLE PORT
Int 14/AH=12h - FOSSIL - READ CURRENT CURSOR LOCATION
Int 14/AH=12h - Digiboard DigiCHANNEL PC/X* - GET TRANSMIT BUFFER FREE SPACE
Int 14/AH=12h - PC-MOS/386 v5.01 $serial.sys v5.04 - GET CURRENT PORT PARAMETERS
Int 14/AH=13h - FOSSIL - SINGLE CHARACTER ANSI WRITE TO SCREEN
Int 14/AH=13h - PC-MOS/386 v5.01 $serial.sys v5.04 - REGISTER A PORT WITH A TERMINAL
Int 14/AH=14h - FOSSIL - ENABLE OR DISABLE WATCHDOG PROCESSING
Int 14/AH=14h - PC-MOS/386 v5.01 $serial.sys v5.04 - OUTPUT STRING
Int 14/AH=14h - Digiboard - GET NUMBER OF BOARDS INSTALLED
Int 14/AH=15h - FOSSIL - WRITE CHARACTER TO SCREEN USING BIOS SUPPORT ROUTINES
Int 14/AH=15h - PC-MOS/386 v5.01 $serial.sys v5.04 - INPUT STRING
Int 14/AH=15h - Digiboard - ENABLE/DISABLE MEMORY
Int 14/AH=16h - FOSSIL - INSERT/DELETE FUNCTION FROM TIMER TICK CHAIN
Int 14/AH=16h - PC-MOS/386 v5.01 $serial.sys v5.04 - LINK TO ANOTHER SERIAL DRIVER
Int 14/AH=16h - Digiboard DigiCHANNEL PC/X* - CCB COMMAND
Int 14/AX=1646h - Digiboard - CCB COMMAND - SET INTERRUPT TO HOST MASK
Int 14/AX=1647h - Digiboard - CCB COMMAND - SET BAUD/DATABITS/STOPBITS/PARITY
Int 14/AX=1649h - Digiboard - CCB COMMAND - SET MODEM LINES
Int 14/AX=164Ah - Digiboard - CCB COMMAND - SET BREAK COUNT
Int 14/AX=164Bh - Digiboard - CCB COMMAND - SET HANDSHAKE
Int 14/AX=164Ch - Digiboard - CCB COMMAND - SET XON/XOFF CHARACTERS
Int 14/AX=164Dh - Digiboard - CCB COMMAND - SET TRANSMIT MID-WATER MARK
Int 14/AX=164Eh - Digiboard - CCB COMMAND - IRQ POLLING TIMER TO HOST
Int 14/AX=164Fh - Digiboard - CCB COMMAND - BUFFER SET ALL
Int 14/AX=1653h - Digiboard - CCB COMMAND - SPECIAL CHARACTER INTERRUPT
Int 14/AH=17h - FOSSIL - REBOOT SYSTEM
Int 14/AH=17h - PC-MOS/386 v5.01 $serial.sys v5.04 - WRITE MODEM CONTROL REGISTER
Int 14/AH=18h - FOSSIL - READ BLOCK
Int 14/AH=18h - Digiboard DigiCHANNEL PC/X* - SEND BIOS COMMAND
Int 14/AH=18h - PC-MOS/386 v5.01 $serial.sys v5.04 - GET DRIVER DESCRIPTION
Int 14/AH=19h - FOSSIL - WRITE BLOCK
Int 14/AH=19h - Digiboard DigiCHANNEL PC/X* - SPECIAL CHARACTER INTERRUPT
Int 14/AH=19h - PC-MOS/386 v5.01 $serial.sys v5.04 - SELECTIVE BUFFER FLUSH
Int 14/AH=1Ah - FOSSIL - BREAK BEGIN OR END
Int 14/AH=1Ah - Digiboard DigiCHANNEL PC/X - SPECIAL CHARACTER FLAG/COUNTER
Int 14/AH=1Bh - FOSSIL - RETURN INFORMATION ABOUT THE DRIVER
Int 14/AH=1Ch - X00 FOSSIL - ACTIVATE PORT
Int 14/AH=1Dh - X00 FOSSIL - DEACTIVATE PORT
Int 14/AH=1Eh - X00 FOSSIL - EXTENDED LINE CONTROL INITIALIZATION
Int 14/AH=1Eh - HUNTER 16 - READ COMMS PARAMETERS
Int 14/AH=1Fh - X00 FOSSIL - EXTENDED SERIAL PORT STATUS/CONTROL
Int 14/AH=20h - X00 FOSSIL - DESTRUCTIVE READ WITH NO WAIT
Int 14/AH=20h - Alloy MW386 - ATTACH LOGICAL COMMUNICATIONS PORT TO PHYSICAL PORT
Int 14/AH=20h - MultiDOS Plus - INITIALIZE PORT
Int 14/AH=20h - PC-MOS/386 v5.01 $serial.sys v5.04 - CHECK OUTPUT QUEUE
Int 14/AH=20h - HUNTER 16 - SELECT COMMS PARAMETERS
Int 14/AH=21h - X00 FOSSIL - STUFF RECEIVE BUFFER
Int 14/AH=21h - Alloy MW386 v1.x only - RELEASE PHYSICAL COMMUNICATIONS PORT
Int 14/AH=21h - MultiDOS Plus - TRANSMIT CHARACTER
Int 14/AH=21h - PC-MOS/386 v5.01 $serial.sys v5.04 - OUTPUT CHARACTER, WITH TIMEOUT
Int 14/AH=21h - HUNTER 16 - EXTENDED CONTROL
Int 14/AH=22h - Alloy MW386 v2+ - RELEASE LOGICAL COMMUNICATIONS PORT
Int 14/AH=22h - MultiDOS Plus - RECEIVE CHARACTER
Int 14/AH=22h - PC-MOS/386 v5.01 $serial.sys v5.04 - RECEIVE CHARACTER, WITH TIMEOUT
Int 14/AH=22h - HUNTER 16 - EXTENDED STATUS
Int 14/AH=23h - Alloy MW386 v2+ - GET PORT NUMBER FROM LOGICAL PORT ID
Int 14/AH=23h - MultiDOS Plus - GET PORT STATUS
Int 14/AH=23h - PC-MOS/386 v5.01 $serial.sys v5.04 - DECLARE PORT OWNERSHIP
Int 14/AH=23h - HUNTER 16 - CONTROL HANDSHAKE LINES
Int 14/AH=24h - Alloy MW386 v2+ - CHANGE PHYSICAL PORT PARAMETERS
Int 14/AH=24h - MultiDOS Plus - SET MONITOR MODE
Int 14/AH=24h - PC-MOS/386 v5.01 $serial.sys v5.04 - ???
Int 14/AH=24h - HUNTER 16 - CONTROL CTS HANDSHAKING
Int 14/AH=25h - MultiDOS Plus - CLEAR BUFFERS
Int 14/AH=25h - HUNTER 16 - CONTROL RS232 DRIVERS
Int 14/AH=26h - HUNTER 16 - CONTROL RI POWER UP
Int 14/AH=27h - MultiDOS Plus - GET BUFFER CHARACTER COUNT
Int 14/AH=27h - HUNTER 16 - GET INSTALLED PROTOCOLS COUNT
Int 14/AH=28h - HUNTER 16 - GET PROTOCOL NAME
Int 14/AH=29h - HUNTER 16 - GET PROTOCOL HANDLE
Int 14/AH=2Ah - HUNTER 16 - EXTENDED PROTOCOL MENU
Int 14/AH=2Bh - HUNTER 16 - GET EXTENDED PROTOCOL PARAMETERS
Int 14/AX=2C00h - HUNTER 16 - GET DTR
Int 14/AH=2Ch - HUNTER 16 - SET DTR
Int 14/AH=36h - ComShare - INSTALLATION CHECK
Int 14/AX=4000h - I1541 - INSTALLATION CHECK
Int 14/AX=4001h - I1541 - TEST IF 1541 CABLE CONNECTED
Int 14/AX=4002h - I1541 - SELECT LPT PORT FOR OUTPUT
Int 14/AX=4003h - I1541 - RESET ALL DEVICES
Int 14/AX=4004h - I1541 - SEND LISTEN SIGNAL
Int 14/AX=4005h - I1541 - SEND SECONDARY ADDRESS FOR LISTEN
Int 14/AX=4006h - I1541 - SEND UNLISTEN SIGNAL
Int 14/AX=4007h - I1541 - SEND TALK SIGNAL
Int 14/AX=4008h - I1541 - SEND SECONDARY ADDRESS FOR TALK
Int 14/AX=4009h - I1541 - SEND UNTALK SIGNAL
Int 14/AX=400Ah - I1541 - SEND A BYTE TO A DEVICE
Int 14/AX=400Bh - I1541 - RECEIVE A BYTE FROM A DEVICE
Int 14/AX=400Ch - I1541 - WAIT
Int 14/AX=400Dh - I1541 - LONGWAIT
Int 14/AX=400Eh - I1541 - GET INFO
Int 14/AH=56h - BWCOM14 - INSTALLATION CHECK
Int 14/AH=57h - BWCOM14 - INITIALIZE
Int 14/AH=58h - BWCOM14 - SHUTDOWN
Int 14/AH=6Fh/BX=FFFEh - Connection Manager - ???
Int 14/AH=6Fh/BX=FFFFh - Connection Manager - INSTALLATION CHECK
Int 14/AX=6F00h - HP Vectra EX-BIOS - F14_INQUIRE - INSTALLATION CHECK
Int 14/AX=6F01h - HP Vectra EX-BIOS - F14_EXINIT - INITIALIZE SERIAL PORT
Int 14/AX=6F02h - HP Vectra EX-BIOS - F14_PUT_BUFFER - TRANSMIT BUFFER
Int 14/AX=6F03h - HP Vectra EX-BIOS - F14_GET_BUFFER - READ DATA INTO BUFFER
Int 14/AX=6F04h - HP Vectra EX-BIOS - F14_TRM_BUFFER - READ UNTIL TERMINATOR
Int 14/AX=7000h - NEWCOM - INSTALLATION CHECK
Int 14/AH=7Eh - FOSSIL - INSTALL AN EXTERNAL APPLICATION FUNCTION
Int 14/AH=7Fh - FOSSIL - REMOVE AN EXTERNAL APPLICATION FUNCTION
Int 14/AH=80h - COMMUNICATIONS FOSSIL
Int 14/AH=80h - COURIERS.COM - INSTALLATION CHECK
Int 14/AX=8000h - ARTICOM - INSTALLATION CHECK
Int 14/AX=8000h - COMM-DRV v14.0 - READ PORT METRICS - GET ERROR CODE AND BUFFER STATUS
Int 14/AX=8001h - ARTICOM - UNLOAD ASYNCHRONOUS REDIRECTOR FROM MEMORY
Int 14/AX=8001h - COMM-DRV v14.0 - READ PORT METRICS - GET PORT PARAMETERS
Int 14/AX=8002h - ARTICOM - GET ASYNCHRONOUS REDIRECTOR STATUS
Int 14/AX=8002h - COMM-DRV v14.0 - READ PORT METRICS - GET PORT PARAMETERS
Int 14/AX=8003h - ARTICOM - TRANSLATE ERROR CODE TO ERROR STRING
Int 14/AX=8003h - COMM-DRV v14.0 - READ PORT METRICS - GET I/O BUFFER SIZES
Int 14/AX=8004h - ARTICOM - ATTACH ASYNCHRONOUS RESOURCE
Int 14/AX=8005h - ARTICOM - DETACH ASYNCHRONOUS RESOURCE
Int 14/AX=8006h - ARTICOM - GET RESOURCE INFORMATION
Int 14/AX=8007h - ARTICOM - GET REDIRECTED PORT INFORMATION
Int 14/AX=8008h - ARTICOM - GET AVAILABLE SERVER NAME
Int 14/AX=8009h - ARTICOM - SET SEND AND RECEIVE TIMEOUTS
Int 14/AX=800Ah - ARTICOM - MODIFY FLOW CONTROL
Int 14/AX=8025h - ARTICOM - SET INTERNAL SEND/RECEIVE VECTOR
Int 14/AX=8035h - ARTICOM - GET INTERNAL SEND/RECEIVE VECTOR
Int 14/AH=81h - COURIERS.COM - CHECK IF PORT BUSY
Int 14/AH=81h - COMM-DRV - EXTENDED INITIALIZATION
Int 14/AX=8100h - VIDEO FOSSIL - RETURN VFOSSIL INFORMATION
Int 14/AX=8101h - VIDEO FOSSIL - OPEN VFOSSIL
Int 14/AX=8102h - VIDEO FOSSIL - CLOSE VFOSSIL
Int 14/AX=8103h - VIDEO FOSSIL - UNINSTALL
Int 14/AH=82h - KEYBOARD FOSSIL
Int 14/AH=82h - COURIERS.COM - CONFIGURE PORT
Int 14/AH=82h - COMM-DRV v14.0 - PORT CLEANUP
Int 14/AH=83h - SYSTEM FOSSIL
Int 14/AH=83h - COURIERS.COM - START INPUT
Int 14/AH=83h - COMM-DRV v14.0 - FLUSH COMMUNICATION BUFFERS
Int 14/AH=84h - COURIERS.COM - READ CHARACTER
Int 14/AH=84h - COMM-DRV v14.0 - SEND PACKET
Int 14/AH=85h - COURIERS.COM - FLUSH PENDING INPUT
Int 14/AH=85h - COMM-DRV v14.0 - RECEIVE PACKET
Int 14/AH=86h - COURIERS.COM - START OUTPUT
Int 14/AH=86h - COMM-DRV v14.0 - SET INPUT/OUTPUT TIMEOUTS
Int 14/AH=87h - COURIERS.COM - OUTPUT STATUS
Int 14/AH=87h - COMM-DRV v14.0 - TURN ON DTR
Int 14/AH=88h - COURIERS.COM - ABORT OUTPUT
Int 14/AH=88h - COMM-DRV v14.0 - TURN OFF DTR
Int 14/AH=89h - COURIERS.COM - SEND SINGLE CHARACTER
Int 14/AH=89h - COMM-DRV v14.0 - TURN ON RTS
Int 14/AH=8Ah - COURIERS.COM - SEND BREAK
Int 14/AH=8Ah - COMM-DRV v14.0 - TURN OFF RTS
Int 14/AH=8Bh - COMM-DRV v14.0 - SET USER INTERRUPT ROUTINE
Int 14/AH=8Ch - COURIERS.COM - SET SPEED
Int 14/AH=8Ch - COMM-DRV v14.0 - READ UART REGISTER
Int 14/AH=8Dh - COURIERS.COM - DECONFIGURE PORT
Int 14/AH=8Dh - COMM-DRV v14.0 - WRITE UART REGISTER
Int 14/AH=8Eh - COMM-DRV v14.0 - READ PACKET NONDESTRUCTIVELY
Int 14/AH=A0h - 3com BAPI SERIAL I/O - CONNECT TO PORT
Int 14/AH=A0h/CX=FFFFh - Interconnections Inc. TES - INSTALLATION CHECK/STATUS REPORT
Int 14/AH=A1h - 3com BAPI SERIAL I/O - DISCONNECT FROM PORT
Int 14/AH=A1h - Interconnections Inc. TES - GET LIST OF SESSIONS WITH STATUS
Int 14/AH=A2h - 3com BAPI SERIAL I/O - WRITE CHARACTER
Int 14/AH=A2h - Interconnections Inc. TES - GET LIST OF SERVER NAMES
Int 14/AH=A3h - 3com BAPI SERIAL I/O - READ CHARACTER
Int 14/AH=A3h - Interconnections Inc. TES - START A NEW SESSION
Int 14/AH=A4h - 3com BAPI SERIAL I/O - WRITE BLOCK
Int 14/AH=A4h - Interconnections Inc. TES - HOLD CURRENTLY ACTIVE SESSION
Int 14/AH=A5h - 3com BAPI SERIAL I/O - READ BLOCK
Int 14/AH=A5h - Interconnections Inc. TES - RESUME A SESSION
Int 14/AH=A6h - 3com BAPI SERIAL I/O - SEND SHORT BREAK
Int 14/AH=A6h - Interconnections Inc. TES - DROP A SESSION
Int 14/AH=A7h - 3com BAPI SERIAL I/O - READ STATUS
Int 14/AH=A7h - Interconnections Inc. TES - SWITCH TO NEXT ACTIVE SESSION
Int 14/AH=A8h - Interconnections Inc. TES - SEND STRING TO COMMAND INTERPRETER
Int 14/AH=A8h - Novell TelAPI v4.01 - CONNECTION INFORMATION???
Int 14/AH=A9h - Novell TelAPI v4.01 - CONNECTION CONTROL???
Int 14/AX=AA01h - DimVGA v2.0+ - INSTALLATION CHECK
Int 14/AX=AA02h - DimVGA v2.0+ - SET TIME-OUT (DIMMING/BLANKING) PERIOD
Int 14/AX=AA03h - DimVGA v2.0+ - SET DIMMING FACTOR
Int 14/AX=AA04h - DimVGA v2.0+ - GET TIME-OUT PERIOD
Int 14/AX=AA05h - DimVGA v2.0+ - GET DIMMING FACTOR
Int 14/AX=AA06h - DimVGA v2.0+ - DISABLE
Int 14/AX=AA07h - DimVGA v2.0+ - ENABLE
Int 14/AX=AA08h - DimVGA v2.0+ - DIM SCREEN 'MANUALLY'
Int 14/AX=AA09h - DimVGA v2.0+ - UNDIM SCREEN 'MANUALLY'
Int 14/AX=AA0Ah - DimVGA v2.0+ - CHECK WHETHER ENABLED
Int 14/AX=AA0Bh - DimVGA v2.1+ - SET HOTKEY
Int 14/AX=AA0Ch - DimVGA v2.1+ - GET HOTKEY
Int 14/AX=AA0Dh - DimVGA v3.0+ - SET MOUSE CHECK STATUS
Int 14/AX=AA0Eh - DimVGA v3.0+ - GET MOUSE CHECK STATUS
Int 14/AX=AA0Fh - DimVGA v3.4 - SET LOCKING STATUS
Int 14/AX=AA10h - DimVGA v3.4 - GET MOUSE CHECK STATUS
Int 14/AH=ADh - IBM SurePath BIOS - Officially Private Function
Int 14/AH=AEh - IBM SurePath BIOS - Officially Private Function
Int 14/AH=AFh - IBM SurePath BIOS - Officially Private Function
Int 14/AX=AF00h/BX=AAAAh - 3com BAPI SERIAL I/O - INSTALLATION CHECK
Int 14/AH=B0h - 3com BAPI SERIAL I/O - EN/DISABLE ENTER COMMAND MODE (ECM) CHARACTER
Int 14/AH=B1h - 3com BAPI SERIAL I/O - ENTER COMMAND MODE
Int 14/AH=B2h - 3com BAPI SERIAL I/O - GET ECM WATCH STATE
Int 14/AH=B3h - 3com BAPI SERIAL I/O - GET/SET CONFIGURATION INFO
Int 14/AH=E0h - TelAPI - telopen - CREATE TELNET CONNECTION (BLOCKING)
Int 14/AX=E000h - MX5 Extended FOSSIL - GET MNP STATUS BLOCK
Int 14/AX=E001h - MX5 Extended FOSSIL - GET/SET MNP LEVEL
Int 14/AX=E002h - MX5 Extended FOSSIL - GET/SET MNP ANSWER/ORIGINATE MODE
Int 14/AX=E003h - MX5 Extended FOSSIL - GET/SET MNP WAIT TICKS
Int 14/AX=E004h - MX5 Extended FOSSIL - GET/SET MNP CONNECT SOUND LEVEL
Int 14/AX=E005h - MX5 Extended FOSSIL - UNINSTALL
Int 14/AX=E006h/BX=0000h - MX5 Extended FOSSIL - INSTALLATION CHECK
Int 14/AX=E007h - MX5 Extended FOSSIL - WAIT SPECIFIED NUMBER OF TICKS
Int 14/AH=E1h - TelAPI - telclose - TERMINATE TELNET CONNECTION
Int 14/AH=E2h - TelAPI - telread - BUFFERED READ
Int 14/AH=E3h - TelAPI - telwrite - BUFFERED WRITE
Int 14/AH=E4h - TelAPI - telioctl - CONNECTION CONTROL
Int 14/AH=E5h - TelAPI - telreset - RESET ALL CONNECTIONS
Int 14/AH=E6h - TelAPI - telunload - UNINSTALL
Int 14/AH=E7h - TelAPI - tellist - GET TELNET SESSION LIST
Int 14/AH=E8h - TelAPI - telattach - ATTACH COM PORT TO/FROM TELNET SESSION
Int 14/AH=E9h - TelAPI - telportosn - GET SESSION NUMBER FOR COM PORT
Int 14/AH=EAh - TelAPI - telstatus - GET TELNET CONNECTION STATUS INFORMATION
Int 14/AH=EBh - TelAPI - telname - GET AVAILABLE/INUSE STATUS FOR ALL SESSIONS
Int 14/AH=ECh - TelAPI - telnblkopen - CREATE TELNET CONNECTION (NON-BLOCKING)
Int 14/AH=EDh - TelAPI - telpoll - POLL TELNET SESSION FOR CONNECTION COMPLETION
Int 14/AX=F0F0h - ASAP v1.0 - ???
Int 14/AX=F0F1h/DX=0000h - ASAP v1.0 - INSTALLATION CHECK
Int 14/AX=F4FFh - IBM/Yale EBIOS SERIAL I/O - INSTALLATION CHECK
Int 14/AH=F9h - IBM/Yale EBIOS SERIAL I/O - REGAIN CONTROL
Int 14/AH=FAh - IBM/Yale EBIOS SERIAL I/O - SEND BREAK
Int 14/AH=FBh - IBM/Yale EBIOS SERIAL I/O - SET OUTGOING MODEM SIGNALS
Int 14/AH=FCh - IBM/Yale EBIOS SERIAL I/O - READ CHARACTER, NO WAIT
Int 14/AX=FD02h - IBM/Yale EBIOS SERIAL I/O - READ STATUS
Int 14/AX=FF00h - TelAPI - telcheck - INSTALLATION CHECK
Int 14/AX=FF01h - IBM/Yale EBIOS SERIAL I/O - SET SEND BUFFER
Int 14/AX=FF02h - IBM/Yale EBIOS SERIAL I/O - SET RECEIVE BUFFER
Int 14/AX=FFF8h - COMM-DRV v14.0 - SET BAUD RATE DIVISOR
Int 14/AX=FFFBh - COMM-DRV v14.0 - GET HIGHEST ALLOWED PORT NUMBER
Int 14/AX=FFFCh - COMM-DRV v14.0 - GET INT 14 FLAGS
Int 14/AX=FFFDh - COMM-DRV v14.0 - SET INT 14 FLAGS
Int 14/AX=FFFEh - COMM-DRV v14.0 - RESTORE INT 14 VECTOR TO ORIGINAL
Int 14/AX=FFFFh - COMM-DRV v14.0 - GET INT 14 INFORMATION AREA

Interrups Categories Contents