|
| Interrups | Categories | Contents |
AH = 12h DS:SI -> command bytes (see #03806) ES:BX -> data storage area CX = number of data bytes to transfer
Return:
AH = SCSI status byte CF clear if successful AL = SCSI message byte CF set on error AL = error code (see #03786)
Note: This command sends data internally one byte at a time
See Also: AH=14h
Format of TARGA.DEV SCSI Command: Offset Size Description (Table 03806) 00h BYTE length of command 01h ??? command bytes
Category: Disk I/O Enhancements - Int 78h - T
|
| Interrups | Categories | Contents |