Int 7F

Telebit ACS SERIAL I/O

ES:SI-> parameter block (see #03867)

Return:
CF set on error CF clear on success

InstallCheck:
Test for the signature "PDGATEWRKSTNIF" just prior to the interrupt handler

Index:
Installation check;Telebit ACS Serial I/O

Format of Telebit ACS parameter block: Offset Size Description (Table 03867) 00h BYTE command (see #03868) 01h BYTE gateway number 02h BYTE reserved 03h BYTE port 04h 17 BYTEs auxiliary buffer 15h BYTE session 16h WORD count of bytes passed to API 18h DWORD buffer pointer passed to/from API 1Ch WORD count of bytes passed from API 1Eh BYTE return code (see #03869)

(Table 03868) Values for Telebit ACS command: 3Ch status 3Dh connect 3Eh disconnect 3Fh read 40h data/command write 41h clear receive buffer 42h get configuration 43h get receiver status 44h raw write 45h search servers 46h set transmit buffer size

(Table 03869) Values for Telebit ACS return code: 00h success 01h invalid session 05h servername invalid 06h NetWare fileserver bindery is locked 07h communication server not active 08h general failure in NetWare fileserver 09h not logged into a fileserver 10h connection table full 11h no response from communication server 12h connection attempt terminated abnormally 13h connection refused - no sessions available 14h gateway number/port already in use 15h invalid connection response 16h port invalid 17h incorrect version in server response 18h gateway number/port combination not configured 19h initialization has not been completed 20h no more sockets are available 21h no active poolname 23h FATAL internal interface error 24h registration of host workstation failed - name is already in use 25h registration of host workstation failed - workstation name table full 26h registration of host workstation failed - only one session may be registered for dial-in FFh Telebit ACS API is busy - retry later

Category: Serial I/O - Int 7Fh - T

Interrups Categories Contents