|
| Interrups | Categories | Contents |
AH = A0h AL = adapter number BH = mode 00h real mode 01h 16:16 protected mode 02h 16:32 protected mode 03h 00:32 (Flat) protected mode BL = subfunction 00h return number of additional data areas (see #00693) 01h return description of additional data areas (see #00694) 02h accept mode-specific pointers to data areas (see #00695) ES:EDI -> buffer supplied by caller
Return:
CF clear if successful AH destroyed CX = number of additional data areas ES:EDI unchanged CF set on error AH = error code (01h,02h,15h,16h,18h) (see #00656)
Format of PCMCIA Subfunction 00h Buffer Table Entry structure: Offset Size Description (Table 00693) 00h DWORD 32-bit linear base address of the code segment 04h DWORD segment limit of the code segment 08h DWORD entry point offset 0Ch DWORD 32-bit linear base address of the data segment (ignored in 00:32 flat mode) 10h DWORD segment limit of the data segment 14h DWORD data area offset. Only used in 32-bit protected mode.
See Also: #00694 - #00695
Format of PCMCIA Additional Data Area Description structure [array]: Offset Size Description (Table 00694) 00h DWORD 32-bit linear base address of the additional data segment (ignored in 00:32 flat mode) 04h DWORD segment limit of the code segment 08h DWORD data area offset (only used in 32-bit protected mode)
See Also: #00693 - #00695
Format of PCMCIA Subfunction 02h Buffer Table Entry structure: Offset Size Description (Table 00695) 00h DWORD 32-bit offset(ignored in 16:16 protected mode) 04h DWORD selector (only used in 00:32 flat mode) 08h DWORD reserved
See Also: #00693 - #00694
Category: Expansion Bus Bios - Int 1Ah - P
|
| Interrups | Categories | Contents |