Interrups

Categories

Contents

• C&T SuperState BIOS
  • ENABLE AUTO WAKEUP AND SET TIME AND DATE
  • ENCRYPT PASSWORD
  • EXECUTE FAR PROC ROUTINE ON SuperState
  • GET ALARM DATE
  • GET ALARM STATUS
  • GET ALARM TIME
  • GET AUTO WAKE UP DATE
  • GET AUTO WAKE UP STATUS
  • GET AUTO WAKE UP TIME
  • GET ENCRYPTED PASSWORD
  • GET/SET CPU SPEED
  • POWER OFF
  • REQUEST PASSWORD INPUT
  • SET ALARM DATE
  • SET ALARM STATUS
  • SET ALARM TIME
  • SET AUTO WAKE UP DATE
  • SET AUTO WAKE UP STATUS
  • SET AUTO WAKE UP TIME
  • SET PASSWORD
  • SET SLEEP TIMEOUT
  • C&T SuperState BIOS - SET SUSPEND TIMEOUT

• CALCULATOR - INSTALLATION CHECK
• Canon IX-30F Image Scanner SI3.SYS - INTERFACE
• Canon IXHND2 Scanner Interface
• CappaCom programs - API

• CARBON COPY PLUS v5.0
  • CHECK IF CC CONNECTED TO CCHELP
  • DISCONNECT AND RESET LINE
  • CARBON COPY PLUS v5.0 - GET LAST PHONE NUMBER DIALED

• CardBus Socket Services
  • ACCESS CONFIGURATION SPACE
  • GET BRIDGE WINDOW / WINDOW CAPABILITIES
  • CardBus Socket Services - SET BRIDGE WINDOW

• CASSETTE
  • READ DATA (PC and PCjr only)
  • TURN OFF TAPE DRIVE'S MOTOR (PC and PCjr only)
  • TURN ON TAPE DRIVE'S MOTOR (PC and PCjr only)
  • CASSETTE - WRITE DATA (PC and PCjr only)

• CATC USB4DOS Device Manager
  • HUB DEVICE ATTACHED
  • HUB DEVICE DETACHED
  • INSTALLATION CHECK
  • REGISTER DEVICE
  • CATC USB4DOS Device Manager - UNLOAD DEVICE

• CATC USB4DOS Host Controller
  • ??? (POLLS VARIOUS I/O PORTS)
  • EXECUTE USB REQUEST
  • GET ???
  • INSTALLATION CHECK
  • CATC USB4DOS Host Controller - INVALID FUNCTION

• CauseWay
  • AliasSel - CREATE READ/WRITE DATA ALIAS SELECTOR
  • CodeSel - CONVERT SELECTOR TO EXECUTABLE CODE SELECTOR
  • ExecOverlay - LOAD AND OPTIONALLY EXECUTE APP CODE
  • FarCallReal - SIMULATE REAL-MODE FAR CALL
  • GetDOSTrans - GET DOS TRANSFER BUFFER
  • GetMem - ALLOCATE BLOCK OF MEMORY
  • GetMem32 - ALLOCATE BLOCK OF MEMORY (32-bit)
  • GetMemDOS - ALLOCATE CONVENTIONAL MEMORY
  • GetMemLinear - ALLOCATE MEMORY WITHOUT SELECTOR
  • GetMemLinear32 - ALLOCATE MEMORY WITHOUT SELECTOR
  • GetMemNear - ALLOCATE APPLICATION-RELATIVE MEMORY
  • GetSel - ALLOCATE NEW SELECTOR
  • GetSelDet - GET SELECTOR BASE AND LIMIT
  • GetSelDet32 - GET SELECTOR BASE AND LIMIT (32-bit)
  • Info - GET SYSTEM SELECTORS/FLAGS
  • IntXX - SIMULATE REAL-MODE INTERRUPT
  • Linear2Near - CONVERT LINEAR TO APP-RELATIVE ADDRESS
  • LockMem - LOCK REGION OF MEMORY
  • LockMem32 - LOCK REGION OF MEMORY (32-bit)
  • LockMemNear - LOCK APPLICATION-RELATIVE MEMORY REGION
  • Near2Linear - CONVERT APP-RELATIVE TO LINEAR ADDRESS
  • RelMem - RELEASE PREVIOUSLY ALLOCATED MEMORY
  • RelMemDOS - RELEASE CONVENTIONAL MEMORY BLOCK
  • RelMemLinear - RELEASE LINEAR MEMORY BLOCK
  • RelMemLinear32 - RELEASE LINEAR MEMORY BLOCK (32-bit)
  • RelMemNear - RELEASE APPLICATION-RELATIVE MEMORY BLOCK
  • RelSel - RELEASE A SELECTOR
  • ResMem - RESIZE MEMORY BLOCK
  • ResMem32 - RESIZE MEMORY BLOCK (32-bit)
  • ResMemDOS - RESIZE CONVENTIONAL MEMORY BLOCK
  • ResMemLinear - RESIZE LINEAR MEMORY BLOCK
  • ResMemLinear32 - RESIZE LINEAR MEMORY BLOCK (32-bit)
  • ResMemNear - RESIZE APPLICATION-RELATIVE MEMORY BLOCK
  • SetDOSTrans - SET DOS TRANSFER BUFFER
  • SetSelDet - SET SELECTOR BASE AND LIMIT
  • SetSelDet32 - SET SELECTOR BASE AND LIMIT (32-bit)
  • UnLockMem - UNLOCK REGION OF MEMORY
  • UnLockMem32 - UNLOCK REGION OF MEMORY (32-bit)
  • CauseWay - UnLockMemNear - UNLOCK APP-RELATIVE MEMORY REGION

• CauseWay v1.3
  • cwcInfo - VALIDATE AND GET SIZE OF CWC FILE
  • cwcLoad - LOAD/EXPAND CWC-COMPRESSED FILE
  • cwLoad - LOAD ANOTHER CAUSEWAY PROGRAM AS OVERLAY
  • GetMCBSize - GET CURRENT MCB ALLOCATION BLOCK SIZE
  • GetMemSO - ALLOCATE MEMORY AND RETURN SEL:OFFSET
  • GetSels - ALLOCATE MULTIPLE SELECTORS
  • RelMemSO - RELEASE SELECTOR:OFFSET MEMORY BLOCK
  • ResMemSO - RESIZE SELECTOR:OFFSET MEMORY BLOCK
  • CauseWay v1.3 - SetMCBSize - SET MCB MEMORY ALLOCATION BLOCK SIZE

• CBIS network - NETWORK REDIRECTOR - ???

• CD-ROM
  • ABSOLUTE DISK READ
  • ABSOLUTE DISK WRITE
  • CORELCDX - INSTALLATION CHECK
  • GET ABSTRACT FILE NAME
  • GET BIBLIOGRAPHIC DOC FILE NAME
  • GET COPYRIGHT FILE NAME
  • GET DRIVE DEVICE LIST
  • INSTALLATION CHECK
  • READ VTOC
  • RESERVED
  • TURN DEBUGGING OFF
  • CD-ROM - TURN DEBUGGING ON

• CD-ROM device driver
  • IOCTL INPUT
  • CD-ROM device driver - IOCTL OUTPUT

• CD-ROM v2.00+
  • DRIVE CHECK
  • GET CD-ROM DRIVE LETTERS
  • GET DIRECTORY ENTRY
  • GET MSCDEX.EXE VERSION (GET VERSION)
  • CD-ROM v2.00+ - GET/SET VOLUME DESCRIPTOR PREFERENCE

• CD-ROM v2.10+ - SEND DEVICE DRIVER REQUEST

• CDBLITZ v2.11
  • DISABLE CACHE
  • ENABLE CACHE
  • FLUSH CACHE
  • GET CACHE STATISTICS
  • GET STATISTICS
  • INSTALLATION CHECK
  • SET 'MAX' MODE (CACHE BOTH DIRECTORIES AND DATA)
  • SET 'MIN' MODE (CACHE ONLY DIRECTORY ENTRIES)
  • CDBLITZ v2.11 - UNINSTALL

• CDTSR
  • DISABLE POPUP
  • ENABLE POPUP
  • GET INTERNAL VARIABLE TABLE
  • CDTSR - REPROGRAM CDTSR

• CED (Command EDitor) - INSTALLABLE COMMANDS
• CheckIt Year 2000 Fix v2.06 - INSTALLATION CHECK

• Chips & Technologies '64300' BIOS
  • GET CLOCK SPEED
  • GET REFRESH RATE
  • GET XRAM INFORMATION
  • SET CLOCK
  • SET LINEAR MEMORY START ADDRESS
  • Chips & Technologies '64300' BIOS - SET REFRESH RATE

• Chips & Technologies '64300'/'65530' BIOS - GET LINEAR MEMORY INFO

• Chips & Technologies '65530' BIOS
  • GET 655xx INFORMATION
  • MODE SET HOOK
  • MODE SET HOOK
  • MONITOR SENSING HOOK
  • POST INITIALIZATION NOTIFICATION
  • Chips & Technologies '65530' BIOS - SET CLOCK

• Chips & Technologies Extended BIOS
  • AUTO EMULATION CONTROL
  • EN/DISABLE ACCELERATOR SUPPORT
  • EN/DISABLE TALL FONT LOADING
  • GET LAPTOP DISPLAY STATUS
  • GET SUPERVGA STATE BUFFER SIZE
  • HORIZONTAL COMPENSATION
  • RESTORE SUPERVGA STATE
  • RETURN CHIP INFORMATION
  • SAVE SUPERVGA STATE
  • SET FLAT-PANEL VIDEO POLARITY
  • SET POWER-ON DISPLAY MODE
  • SET POWER-ON EMULATION MODE
  • SET PREPROGRAMMED EMULATION
  • SET VERTICAL COMPENSATION
  • SWITCH DISPLAY DEVICE
  • Chips & Technologies Extended BIOS - TURN FLAT PANEL ON/OFF

• Chips & Technologies Wingine DGX
  • GET EXTENDED BIOS SAVE BUFFER SIZE
  • RESTORE VIDEO STATE
  • Chips & Technologies Wingine DGX - SAVE VIDEO STATE

• CiriSOFT Spanish University of Valladolid TSR's Interface

• Cirrus Logic BIOS
  • FORCE 8-BIT OR 16-BIT OPERATION
  • GET BIOS VERSION NUMBER
  • GET DESIGN REVISION CODE
  • GET HIGH REFRESH
  • GET INSTALLED MEMORY
  • GET USER OPTIONS
  • GET VIDEO MODE AVAILABILITY
  • INQUIRE VGA TYPE
  • READ MONITOR TYPE AND ID FROM 15-PIN CONNECTOR
  • SET HIGH REFRESH
  • SET MONITOR HORIZONTAL RETRACE FREQUENCY
  • SET MONITOR TYPE
  • Cirrus Logic BIOS - SET VGA REFRESH

• Cirrus Logic BIOS v3.02
  • INQUIRE OPTIONS
  • LCD panel - EN/DISABLE REVERSE VIDEO MODE
  • LCD panel - ENABLE/DISABLE BOLD MODE
  • LCD panel - ENABLE/DISABLE EXPAND MODE
  • LCD panel - SET 720-DOT FIXUP MODE
  • LCD panel - SET AUTOMAP/EMULATE ATTRIBUTES
  • LCD panel - SET CENTERING MODE
  • LCD panel - SET FRAME COLOR
  • LCD panel - SWITCH DISPLAY
  • Cirrus Logic BIOS v3.02 - POWER CONSERVATION

• Clara Empricost
  • TSR Version - INSTALLATION CHECK
  • Clara Empricost - TSR Version - UNINSTALL

• Cloaking
  • ALLOCATE GDT SELECTOR
  • CALL PROTECTED-MODE PASSALONG CHAIN
  • CALL V86-MODE INTERRUPT HANDLER
  • CALL V86-MODE PROCEDURE
  • CHAIN TO V86-MODE INTERRUPT HANDLER
  • FREE GDT SELECTOR
  • GET BASE ADDRESS OF GDT SELECTOR
  • GET ESP0 FROM TSS
  • GET PASSALONG ADDRESS
  • GET PORT-TRAPPING PASSALONG
  • GET PROTECTED-MODE INTERRUPT VECTOR
  • GET SELECTOR LIMIT
  • GET SIZE OF PROTECTED-MODE STATE
  • GET TRAPPING STATE OF SPECIFIED PORT
  • ISSUE PROTECTED-MODE XMS CALL
  • PROTECTED-MODE VIRTUAL DMA SERVICES
  • REAL-MODE API
  • RESTORE PROTECTED-MODE STATE
  • SAVE PROTECTED-MODE STATE
  • SET 8259 IRQ BASE VECTORS
  • SET PASSALONG ADDRESS
  • SET PORT-TRAPPING PASSALONG
  • SET PROTECTED-MODE INTERRUPT VECTOR
  • SET SECONDARY STACK
  • SET SEGMENT ACCESS MODE
  • SET SEGMENT BASE ADDRESS
  • SET SEGMENT EXTENDED ACCESS MODE
  • SET SEGMENT LIMIT
  • SET V86-MODE STACK
  • TRAP I/O PORT
  • Cloaking - UNTRAP I/O PORT

• Cloaking v1.01
  • ALLOCATE V86 CALLBACK
  • CLEAR CRITICAL SECTION
  • FREE V86 CALLBACK
  • GET INT 2C API HANDLER ENTRY POINT
  • Issue_System_Modal_Message
  • Query_Current_VM
  • REGISTER CLOAKING CLIENT
  • SET CRITICAL SECTION
  • Simulate_Shell_Event
  • Switch_VMs_and_Call_back
  • Cloaking v1.01 - UNREGISTER CLOAKING CLIENT

• COLAP - INSTALLATION CHECK
• Columbia Data Products Standard Device Level Protocol (SDLP) 1.6
• Columbia PCs (desktop,VP portables) - ROM DEBUGGER

• COMBI-disk v1.13
  • CONTROL COMBI-disk
  • COMBI-disk v1.13 - GET DATA RECORD

• COMM-DRV - EXTENDED INITIALIZATION

• COMM-DRV v14.0
  • FLUSH COMMUNICATION BUFFERS
  • GET HIGHEST ALLOWED PORT NUMBER
  • GET INT 14 FLAGS
  • GET INT 14 INFORMATION AREA
  • PORT CLEANUP
  • READ PACKET NONDESTRUCTIVELY
  • READ PORT METRICS - GET ERROR CODE AND BUFFER STATUS
  • READ PORT METRICS - GET I/O BUFFER SIZES
  • READ PORT METRICS - GET PORT PARAMETERS
  • READ PORT METRICS - GET PORT PARAMETERS
  • READ UART REGISTER
  • RECEIVE PACKET
  • RESTORE INT 14 VECTOR TO ORIGINAL
  • SEND PACKET
  • SET BAUD RATE DIVISOR
  • SET INPUT/OUTPUT TIMEOUTS
  • SET INT 14 FLAGS
  • SET USER INTERRUPT ROUTINE
  • TURN OFF DTR
  • TURN OFF RTS
  • TURN ON DTR
  • TURN ON RTS
  • COMM-DRV v14.0 - WRITE UART REGISTER

• Common Access Method SCSI interface (draft revision 1.9)

• Common Access Method SCSI interface rev 2.3
  • INSTALLATION CHECK
  • Common Access Method SCSI interface rev 2.3 - SEND CCB TO XPT/SIM

• Common ISDN API (CAPI) v1.1
  • API-DEINSTALL - UNINSTALL
  • API-GET-MANUFACTURER
  • API-GET-MESSAGE
  • API-GET-SERIAL-NUMBER
  • API-GET-VERSION
  • API-MANUFACTURER - VENDOR-SPECIFIC
  • API-PUT-MESSAGE
  • API-REGISTER - INITIALIZE CAPI
  • API-RELEASE - UNREGISTER FROM CAPI
  • Common ISDN API (CAPI) v1.1 - API-SET-SIGNAL - SIGNAL HANDLING

• Common ISDN API (CAPI) v2.0
  • CAPI_GET_MANUFACTURER
  • CAPI_GET_MESSAGE
  • CAPI_GET_PROFILE - GET CAPABILITIES
  • CAPI_GET_SERIAL_NUMBER
  • CAPI_GET_VERSION
  • CAPI_MANUFACTURER - VENDOR-SPECIFIC
  • CAPI_PUT_MESSAGE
  • CAPI_REGISTER - INITIALIZE CAPI
  • CAPI_RELEASE - UNREGISTER FROM CAPI
  • Common ISDN API (CAPI) v2.0 - CAPI_SET_SIGNAL - SIGNAL HANDLING

• Communicating Applications Spec v1.2+
  • GET NUMBER OF RECEIVE EVENTS
  • GET NUMBER OF SEND EVENTS
  • SET COVER PAGE STATUS
  • Communicating Applications Spec v1.2+ - UNLOAD RESIDENT MANAGER

• Communicating Applications Specification
  • ABORT CURRENT EVENT
  • DELETE ALL FILES IN Q
  • DELETE FILE
  • FIND FIRST QUEUE ENTRY
  • FIND NEXT QUEUE ENTRY
  • GET CURRENT EVENT STATUS
  • GET DIAGNOSTICS RESULTS
  • GET EVENT DATE
  • GET EVENT TIME
  • GET EXTERNAL DATA BLOCK
  • GET HARDWARE STATUS
  • GET QUEUE STATUS
  • GET/SET AUTORECEIVE
  • INSTALLATION CHECK
  • MOVE RECEIVED FILE
  • OPEN FILE
  • SET TASK DATE
  • SET TASK TIME
  • START DIAGNOSTICS
  • SUBMIT A TASK
  • Communicating Applications Specification - SUBMIT FILE TO SEND

• COMMUNICATIONS FOSSIL

• Compaq 386 and newer
  • DETERMINE ATTACHED KEYBOARD TYPE
  • READ CURRENT CPU SPEED
  • Compaq 386 and newer - SET CPU SPEED

• Compaq 80286s - SET CPU SPEED LIMIT (OVERRIDE JUMPER)

• Compaq AG1024.SYS
  • CPQ_MGES - IOCTL OUTPUT
  • RGDI - GET DRIVER LOCATION
  • Compaq AG1024.SYS - RGDI - IOCTL OUTPUT

• Compaq CEMM v5.10+ - PRIVATE API
• Compaq Contura - GET ???

• Compaq Contura 486 and Alladin 1993/08/05 ROMs
  • ???
  • Compaq Contura 486 and Alladin 1993/08/05 ROMs - GET ???

• Compaq Contura Aero, Contura 400 - GET SYSTEM MODEL CODE???

• Compaq EISA System ROM 04/08/93
  • 32-bit CS ADDRESSING MODE CALLS
  • ???
  • ???
  • ???
  • ???
  • Compaq EISA System ROM 04/08/93 - GET ???

• Compaq LTE Lite
  • GET ???
  • Compaq LTE Lite - SET ???

• Compaq Prolinea - GET ???
• Compaq QVision - ???
• Compaq ROM BIOS 1993/08/03 and newer - ???

• Compaq SLT/286
  • ENTER STANDBY
  • MODIFY POWER CONSERVATION/MODEM CONFIGURATION
  • Compaq SLT/286 - READ POWER CONSERVATION/MODEM CONFIGURATION

• Compaq SLT/286 or Portable 386
  • READ LCD/PLASMA TIMEOUT
  • Compaq SLT/286 or Portable 386 - SET LCD/PLASMA TIMEOUT

• Compaq Systempro
  • MULTIPROCESSOR AVAILABLE
  • MULTIPROCESSOR DISPATCH
  • Compaq Systempro - MULTIPROCESSOR END-OF-DISPATCH

• Compaq Systempro and higher
  • CACHE CONTROLLER STATUS
  • DISABLE CACHE CONTROLLER
  • Compaq Systempro and higher - ENABLE CACHE CONTROLLER

• Compaq UILIB.EXE
  • API
  • Compaq UILIB.EXE - INSTALLATION CHECK

• Compaq, ATAPI Removable Media Device - GET CURRENT MEDIA FORMAT
• ComShare - INSTALLATION CHECK

• COMTROL HOSTESS i/ISA DEBUGGER
  • CHANGE FIRMWARE DEBUGGING PORT
  • ENTER/EXIT EXTENDED ADDRESSING MODE
  • GET CONFIGURATION INFORMATION
  • GET SEGMENT FOR CONTROL PROGRAM USE
  • INVOKE FIRMWARE DEBUGGER
  • COMTROL HOSTESS i/ISA DEBUGGER - INVOKE REMOTE TURBO DEBUGGER KERNEL

• Comwave Microfax Specification
  • COMMAND SUBMISSION
  • Comwave Microfax Specification - GET STATUS ARRAY

• ConcCP/M,DR Multiuser DOS
  • C_ATTACH - ATTACH TO DEFAULT CONSOLE
  • C_DETACH - DETACH FROM DEFAULT CONSOLE
  • EXECUTE DOS-COMPATIBLE FUNCTIONS
  • P_DISPATCH - CALL DISPATCHER
  • P_PRIORITY - SET PROCESS PRIORITY
  • Q_CREAD - CONDITIONALLY READ MSG QUEUE
  • Q_CWRITE - CONDITIONALLY WRITE MSG QUEUE
  • Q_MAKE - CREATE MESSAGE QUEUE
  • Q_OPEN - OPEN MESSAGE QUEUE
  • Q_READ - READ MESSAGE QUEUE
  • Q_WRITE - WRITE MESSAGE QUEUE
  • ConcCP/M,DR Multiuser DOS - S_MEMORY - RESERVE MEMORY IN GLOBAL AREA

• ConcCP/M,DR Multiuser DOS,REAL/32 - S_OSVER - GET OS VERSION
• Concurrent DOS etc. - USER GROUP SUPPORT
• Concurrent DOS v3.2+ - INSTALLATION CHECK

• Connection Manager
  • ???
  • CLOSE COMMUNICATION
  • INSTALLATION CHECK
  • MODIFY ACTIVE CONNECTION PARAMETERS
  • MODIFY DEFAULT CONNECTION PARAMETERS
  • OPEN COMMUNICATION
  • PREPARE FOR INBOUND CONNECTION
  • QUERY SERVICE NAMES
  • RECEIVE CHARACTER
  • RECEIVE CHARACTER BLOCK
  • RETURN ACTIVE CONNECTION PARAMETERS
  • RETURN COMMUNICATION PORT STATUS
  • RETURN DEFAULT CONNECTION PARAMETERS
  • SEND BREAK
  • SEND CHARACTER
  • SEND CHARACTER BLOCK
  • SET HARDWARE FLOW STATE
  • TERMINATE CONNECTION CLIENT ACTIVITY
  • Connection Manager - TEST FOR INBOUND CONNECTION REQUEST

• Connection Manager CLIENT.EXE - ???
• Conner Backup Exec AUTORES - API
• CONVERGENT TECHNOLOGIES ClusterShare CTOS ACCESS VECTOR
• Corel PowerSCSI - FDAUDIO.COM - INSTALLATION CHECK

• COURIERS.COM
  • ABORT OUTPUT
  • CHECK IF PORT BUSY
  • CONFIGURE PORT
  • DECONFIGURE PORT
  • FLUSH PENDING INPUT
  • INSTALLATION CHECK
  • OUTPUT STATUS
  • READ CHARACTER
  • SEND BREAK
  • SEND SINGLE CHARACTER
  • SET SPEED
  • START INPUT
  • COURIERS.COM - START OUTPUT

• CP/M-86 v1.1 - XIOS INTERRUPT / UNKNOWN DISK DRIVE
• CP/M-86, Concurrent CP/M, DR Multiuser DOS - FUNCTION CALLS
• CPI-standard virus - FRIEND CHECK

• CPU-generated (80186+)
  • BOUND RANGE EXCEEDED
  • CPU-generated (80186+) - INVALID OPCODE

• CPU-generated (80286+)
  • COPROCESSOR ERROR
  • DOUBLE EXCEPTION DETECTED
  • GENERAL PROTECTION VIOLATION
  • INVALID TASK STATE SEGMENT
  • PROCESSOR EXTENSION NOT AVAILABLE
  • SEGMENT NOT PRESENT
  • CPU-generated (80286+) - STACK FAULT

• CPU-generated (80286,80386) - PROCESSOR EXTENSION PROTECTION ERROR
• CPU-generated (80386+ native mode) - PAGE FAULT
• CPU-generated (80386+) - DEBUGGING EXCEPTIONS
• CPU-generated (80486+) - ALIGNMENT CHECK
• CPU-generated (Pentium +) - MACHINE CHECK EXCEPTION

• CPU-generated
  • BREAKPOINT
  • INTO DETECTED OVERFLOW
  • CPU-generated - SINGLE STEP

• Creative Technology CTMMSYS.SYS v1.00.01 - API
• Creative Technology CTSB2.SYS v1.01.01 - API

• Cswitch
  • ALLOW TASK TO BE SWAPPED OUT
  • CHECK SEMAPHORE
  • CHECK STATUS OF PREVIOUS LOAD_TASK
  • DON'T ALLOW TASK TO BE SWAPPED OUT
  • GET TCB ADDRESS
  • GET TCB INFORMATION
  • GIVE UP REST OF TIME-SLICE
  • LOAD AND RUN PROGRAM FROM DISK
  • READ MESSAGE
  • SEND MESSAGE
  • SET PRIORITY
  • SLEEP
  • SPAWN
  • SUSPEND
  • TERMINATE SPAWNED PROGRAM
  • TEST MESSAGE QUEUE
  • TRIGGER SEMAPHORE
  • WAIT FOR SEMAPHORE
  • Cswitch - WAKE UP TASK

• CS_TSR specification
  • CUSTOM SUBFUNCTION
  • GET HANDLE (TSR-SPECIFIC INSTALLATION CHECK)
  • GET PROCESS BLOCK BY PROCESS HANDLE
  • CS_TSR specification - TSR INSTALLATION CHECK

• CTask 2.0+ - INSTALLATION CHECK
• CTDEMN - INSTALLATION CHECK
• CtrlAlt Associates EGAPAL.COM v1.00 - INSTALLATION CHECK
• CtrlAlt Associates STACKEY.COM v3.00 - API
• CtrlAlt Associates VGAPAL.COM v1.00 - INSTALLATION CHECK

• CU Writer v1.4
  • DRAW FILLED RECTANGLE
  • DRAW LINE TO
  • DRAW RECTANGLE
  • FLOOD FILL
  • GET OPTION
  • GO TO TEXT ROW AND COLUMN
  • LOAD PICTURE
  • MOVE TO
  • OUTPUT TEXT
  • PUT PIXEL
  • REVERSE TEXT
  • SET OPTION
  • SET PIXEL WRITE MODE
  • TEXT BAR
  • CU Writer v1.4 - TEXT MENU

• CUBIT v4.00
  • GET CUBIT INT 21 HANDLER
  • CUBIT v4.00 - UNINSTALL

• CUCKOO.COM - INSTALLATION CHECK

Interrups

Categories

Contents